Two axis stepper motor driver expansion board based on the L6470 for STM32 Nucleo (X-NUCLEO-IHM02A1)

The X-NUCLEO-IHM02A1 is a two axis stepper motor driver expansion board based on the L6470. It provides an affordable and easy-to-use solution for low voltage motor control driving for stepper motors in your STM32 Nucleo project.

The expansion board includes two L6470s, a fully-integrated micro stepping motor driver used to control stepper motors by means of high-end motion control commands received through SPI. It is capable of driving one or two stepper motors when plugged into an STM32 Nucleo board.

This board is equipped with Arduino UNO R3 connectors and the layout is also compatible with ST morpho connectors. One or more of these expansion boards can be plugged into an STM32 Nucleo board to control one or more stepper motors.

Each SPI peripheral of each L6470 is connected in a daisy chain configuration.

Возможности

  • Operating voltage: 8 V - 45 V DC
  • 7 A peak ouotput current (3 A rms) for each motor driver
  • Digital voltage supply is selectable (3.3 V or 5.0 V) by a 0 О© resistor and is provided on main board
  • 3.3 V digital voltage supply may be provided by:
    • the STM32 Nucleo board
    • the step-down monolithic power switching regulator soldered on the expansion board (through jumper selection, it can also be used to supply the STM32 Nucleo board
  • USART communication
    • enables receiving of commands from a PC
    • enables sending information to a PC
    • Requires no dedicated cable; uses the Type A to Type Mini-B USB cable already used to supply the STM32 Nucleo board
  • SPI interface (may be connected in a daisy chain configuration)
  • Equipped with Arduino UNO R3 connectors
  • Layout compatible with ST morpho connectors
  • Five LEDs:
    • 2 green, to indicate that each L6470 is powered
    • 1 orange, to indicate that the digital voltage is on
    • 1 yellow, to indicate when any L6470 is busy
    • 1 red, to indicate when a fault condition occurs (step loss, OCD, thermal pre-warning or shutdown, UVLO, incorrect command, non-performable command) for any L6470
  • RoHS compliant

Спецификация (BOM)

Загрузите полный список требуемых компонентов.

Two axis stepper motor driver expansion board based on the L6470 for STM32 Nucleo X-NUCLEO-IHM02A1

Используемые компоненты

Производитель: STMicroelectronics
Наименование
Производитель
Описание Корпус/
Изображение
Цена, руб. Наличие
L6470H
L6470H
STMicroelectronics
Арт.: 445320 ИНФО PDF RD
Доступно: 19429 шт. от: 568 руб.
Контроллер DC двигателя - [HTSSOP-28]; Тип: Driver, Controller; Uпит: 8...45 В; Iвых: 3 А; Примечание: Микрошаг 1/128; dSPIN™ fully integrated microstepping motor driver with motion engine and SPI
L6470H 568,00 от 7 шт. 487,00 от 14 шт. 447,00
120 шт.
(на складе)
19309 шт.
(под заказ)
L6470HTR
L6470HTR
STMicroelectronics
Арт.: 445322 ИНФО PDF RD
Доступно: 16379 шт. от: 575 руб.
драйвер микрошагового мотора (1/128), Operating voltage: 8 - 45 V, 7.0 A output peak current (3.0 A r.m.s.)
L6470HTR 575,00 от 7 шт. 493,00 от 14 шт. 453,00
141 шт.
(на складе)
16238 шт.
(под заказ)
L6470PD
L6470PD
STMicroelectronics
Арт.: 1048830 PDF RD
Доступно: 13270 шт.
Выбрать
условия
поставки
MOTOR DRIVER, MICROSTPNG, 7A, 36POWERSO
L6470PD
13270 шт.
(под заказ)
Выбрать
условия
поставки
L6470PDTR
STMicroelectronics
Арт.: 1048831 PDF RD
Доступно: 29350 шт.
Выбрать
условия
поставки
MOTOR DRIVER, STEPPER, POWERSO-36
L6470PDTR
29350 шт.
(под заказ)
Выбрать
условия
поставки
X-NUCLEO-IHM02A1
X-NUCLEO-IHM02A1
STMicroelectronics
Арт.: 2088776 ИНФО PDF RD
Доступно: 1237 шт. от: 1710 руб.
Плата драйвера двухфазного биполярного шагового двигателя X-NUCLEO-IHM02A1.
X-NUCLEO-IHM02A1 1710,00 от 3 шт. 1460,00 от 5 шт. 1350,00
2 шт.
(на складе)
1235 шт.
(под заказ)