MCP1662 Evaluation Board (ADM00555)

The MCP1662 LED Driver Evaluation Board is used to evaluate and demonstrate Microchip Technology’s MCP1662 product. This board demonstrates the MCP1662 in a boost-converter application supplied by two AA batteries, or from an external voltage source, which drives a string of LEDs with three selectable currents: 30 mA, 60 mA and 90 mA. The output current can be changed with a dual switch that changes the external LED current sense equivalent resistance (RSET). An enable switch is used to enable and disable the converter. When enabled, the MCP1662 will regulate the output current; when disabled, the current consumed from the battery by the device is typically less than 20 nA.

Возможности

    • It can be powered by two-cell Alkaline, NiCd, NiMH or Lithium AA cell batteries
    • Input Voltage range (V IN ): 2.4V to 5.5V, with V IN < V OUT
    • Undervoltage Lockout: 2.3V to Start; 1.85V to Stop
    • Adjustable Output Current: 30 mA, 60 mA or 90 mA, selected using a dual switch on-board
    • PWM Switching Frequency: 500 kHz
    • Enable converter using switch on board
    • 1.3A Peak Input Current Limit
    • Overtemperature Protection (if the die temperature exceeds +150°C, with 15°C hysteresis)
    • Open Load Protection in case of: LED fail or FB disconnected/fault

Файлы

Схемы и диаграммы

Быстро получите общее представление о схемотехнике решения

Тесты и симуляция

Протестируйте плату по готовым тестам

Спецификация (BOM)

Загрузите полный список требуемых компонентов.

MCP1662 Evaluation Board ADM00555

Используемые компоненты

Производитель: Microchip Technology Inc.
Наименование
Производитель
Описание Корпус/
Изображение
Цена, руб. Наличие
MCP1662T-E/OT
MCP1662T-E/OT
Microchip Technology Inc.
Арт.: 1996540 PDF RD
Доступно: 16355 шт.
Выбрать
условия
поставки
32V OUTPUT, NON-SYNCHRONOUS BOOST LED DR
MCP1662T-E/OT
16355 шт.
(под заказ)
Выбрать
условия
поставки