Evaluation Kit for the MAX5037 (MAX5037EVKIT) (MAX5037EVKIT)

The MAX5037 evaluation (EV) kit is a fully assembled and tested VRM power-supply evaluation kit. The EV kit module can be inserted directly into the VRM daughter board AMP connector (1364125-1 or equivalent) on Pentium® 4 processor motherboards. The input voltage range is either 4.75V to 5.5V or 8V to 13.2V. The EV kit design is optimized for the best performance at 12V input and 1.75V output voltage settings. The output is programmable from 1.1V to 1.85V through VID input in compliance with Intel® VRM 9.0 specification. Up to 52A load current is possible from dual-phase conversion. High-power density and simple assembly is achieved due to a lower component count using the MAX5037.

Warning
The MAX5037 EV kit is designed to operate at high currents, and some of the components operate at high temperatures. Avoid touching the components. The evaluation board is not provided with a fuse. Use a controlled current source to power up the board. Under severe fault conditions, this EV kit may dissipate a large amount of power. To avoid possible personal injury, operate this kit with care.

Возможности

  • Designed to Meet VRM 9.0 Mechanical and Electrical Specifications
  • Two-Phase Power Conversion
  • 5V or 12V Input Operation (Design Optimized for 12V Input)
  • Output Voltage Programmable from 1.1V to 1.85V in 25mV Step-Through VID Input
  • VRM 9.0-Compliant Integrated 5-Bit DAC
  • 52A Output Current
  • Adaptive Voltage Positioning for Optimized Transient Response
  • Average Current-Mode Control for Superior Current Sharing
  • Current-Sharing Accuracy Within 5% Between Parallel Channels
  • Up to 95% Efficiency
  • 500kHz Effective Switching Frequency (Two Phases)
  • Output Overload Protection
  • Output Overvoltage Crowbar Protection
  • Internal Undervoltage Lockout and Startup Circuit
  • Excellent Line-and-Load Transient Response
  • Phase Failure Detector
  • Multiple-Phase Synchronization Between Parallel Modules
  • VRM 9.0-Compliant EDGE Connector

Файлы

Печатные платы и ПО

Ускорьте разработку по готовому дизайну

Используемые компоненты

Производитель: Maxim Integrated
Наименование
Производитель
Описание Корпус/
Изображение
Цена, руб. Наличие
MAX5037AEMH
Maxim Integrated
Арт.: 468014 PDF AN RD
Поиск
предложений
MAX5037AEMH
-
Поиск
предложений
MAX5037AEMH-T
Maxim Integrated
Арт.: 468015 PDF AN RD
Поиск
предложений
MAX5037AEMH-T
-
Поиск
предложений
MAX5037AETH
Maxim Integrated
Арт.: 468016 PDF AN RD
Поиск
предложений
MAX5037AETH
-
Поиск
предложений
MAX5037AETH-T
Maxim Integrated
Арт.: 468017 PDF AN RD
Поиск
предложений
MAX5037AETH-T
-
Поиск
предложений
MAX5037EMH
Maxim Integrated
Арт.: 468018 PDF AN RD
Поиск
предложений
MAX5037EMH
-
Поиск
предложений
MAX5037ETH
Maxim Integrated
Арт.: 468019 PDF AN RD
Поиск
предложений
MAX5037ETH
-
Поиск
предложений
MAX5037ETH-T
Maxim Integrated
Арт.: 468020 PDF AN RD
Поиск
предложений
MAX5037ETH-T
-
Поиск
предложений
MAX5037EVKIT
Maxim Integrated
Арт.: 468021 ИНФО PDF AN RD
Поиск
предложений
The MAX5037 evaluation (EV) kit is a fully assembled and tested VRM power-supply evaluation kit. The EV kit module can be ins…
MAX5037EVKIT
-
Поиск
предложений
MAX5037EMH-T
Maxim Integrated
Арт.: 586541 PDF AN RD
Поиск
предложений
MAX5037EMH-T
-
Поиск
предложений