Терраэлектроника

Headset Detection Switch to Detect 3-Pole or 4-Pole 3.5mm Accessories (TIDA-00006)

This reference design is for autonomous audio headset switch applications. Some audio headsets have integrated analog microphones. The GND and MIC connections on the audio jack connector may be swapped depending on the manufacturer. This design has the ability to detect the presence of an analog microphone on the audio headset, detect the pin configuration of the MIC and Ground pins, and switch the system MIC pin to the correct audio jack connector. This allows the customer's audio solution to work seamlessly with headsets from all manufacturers.

Возможности

VDD range = 2.6V to 4.7V with Ground FET switches (60mΩ typ RON) Detection initiated by external trigger pin Supports FM signal transmission through the ground FETs Reduction of click/pop noise THD (Mic): 0.002% Typical 8-kV Contact Discharge (IEC 61000-4-2) ESD rating for Sleeve, Ring2 and Tip

Файлы

Схемы и диаграммы

Быстро получите общее представление о схемотехнике решения

Тесты и симуляция

Протестируйте плату по готовым тестам

Спецификация (BOM)

Загрузите полный список требуемых компонентов.

Headset Detection Switch to Detect 3-Pole or 4-Pole 3.5mm Accessories TIDA-00006

Заметили ошибку в работе сайта?
Скажите нам об этом