Ваш город: Москва
+7 (495) 221-78-04
+7 (812) 327-327-1
Терраэлектроника
Применения > Автомобилестроение > Системы помощи водителю (ADAS) > Фронтальная камера > System Level reference design for 30W ADAS system with required Automotive Protections

System Level reference design for 30W ADAS system with required Automotive Protections (PMP10652)

PMP10652 is a System optimized (CISPR 25 Class 3) 30W design for Surround View ADAS system. The design has various protections such as Load dump through TVS (ISO pulse testing), Reverse Voltage (Innovative Smart diode with very low Iq), Battery Disconnect Switch with OVP protection (PFET) and is EMI optimized to meet Conductive EMI limits of CISPR25 Class3 (overall) and Class5 upto 30MHz Range. Input voltage range is between 4.5V to 30V with OVP at 20V and hence will operate in most Cold Cranking conditions. LM74610 is used for Battery reverse protection which utilizes a charge pump to drive an N-channel FET to provide a resistive path for the bypass current to flow. LM53603Q1 is used as front end DC/DC Buck converter which is 2.2MHz switching, Synchronous rectified Wide Vin Buck Converter which can take transient upto 42V. TPS57114Q1 is used to provide power to the cores and it is a high current 2,2MHz switching buck converter. LM26420 is a dual 2.2MHz switching buck converter which is used for generating other required supplies. LM3880 sequencer is used for all the power up and power down sequencing requirements.

Возможности

Designed for most Cold Crank and Start Stop conditions In compliance with the ISO pulse test / CISPR 25 Class 3 conducted emissions standard, passing both AM & FM radio band tests All devices Switching frequency at 2.1MHz (AM Band Avoidance) Reverse Protection through Smart diode Series Fault protection FET with OVP Power up and Power Down sequencing through integrated sequencer

Файлы

Схемы и диаграммы

Быстро получите общее представление о схемотехнике решения

Тесты и симуляция

Протестируйте плату по готовым тестам

Спецификация (BOM)

Загрузите полный список требуемых компонентов.

System Level reference design for 30W ADAS system with required Automotive Protections PMP10652

Возможность заказа

Покупка BOM PMP10652

Вы будете перенаправлены на страницу выбора предложений по позициям, входящим в состав типового решения PMP10652


Заметили ошибку в работе сайта?
Скажите нам об этом