Терраэлектроника
Применения > Персональная электроника > ТВ, телеприставки и аудио > AV-ресивер > Universal Input to 3.3V, 12V, 36V, 200W Continuous PSU for Class-D Amplifier Reference Design

Universal Input to 3.3V, 12V, 36V, 200W Continuous PSU for Class-D Amplifier Reference Design (PMP10215)

This power module generates all voltages to supply a class-D audio amplifier. The main output voltage is 36V and delivers 200W continuously and 540W peak. The first stage is a power-factor corrected Boost. A Flyback converter supplies 12V on primary side as well as 12V @ 300mA and 3.3V @ 200mA on secondary side. A hardware switch + remote input let the converter enter in stand-by mode: in this status the 36V output is disabled and 12V, 3.3V are "always on". This way the stand-by power is reduced down to 150mW @ 115Vac and 270mW @ 230Vac. A second digital input switches the main output voltage from 36V to 18V, allowing low current consumption mode in case of the audio amplifier needs less power.

Возможности

Low cost PFC + 2-Switch Forward topology provides 200W average, 540Wpeak power Constant switching frequency: particularly suitable for audio applications Simple thermal inteface: two small heat-sinks placed on one side of the board Good plug-to-plug efficiency: 84% @ 115Vac, 86% @ 230Vac Compact construction: 126mm x 145mm, height 35mm

Файлы

Схемы и диаграммы

Быстро получите общее представление о схемотехнике решения

Тесты и симуляция

Протестируйте плату по готовым тестам

Спецификация (BOM)

Загрузите полный список требуемых компонентов.

Universal Input to 3.3V, 12V, 36V, 200W Continuous PSU for Class-D Amplifier Reference Design PMP10215

Заметили ошибку в работе сайта?
Скажите нам об этом