Терраэлектроника
Применения > > STM32 Nucleo-144 development board with STM32F207ZG MCU, supports Arduino, ST Zio and morpho connectivity

STM32 Nucleo-144 development board with STM32F207ZG MCU, supports Arduino, ST Zio and morpho connectivity (NUCLEO-F207ZG)

The STM32 Nucleo-144 board provides an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, choosing from the various combinations of performance, power consumption and features. The ST Zio connector, which is an extension of Arduinoв„ў Uno V3, provides access to more peripherals and ST morpho headers make it easy to expand the functionality of the Nucleo open development platform with a wide choice of specialized shields. The STM32 Nucleo-144 board does not require any separate probe, as it integrates the ST-LINK/V2-1 debugger/programmer and it comes with the STM32 comprehensive software HAL library, together with various packaged software examples, as well as a direct access to the ARMВ®mbedв„ўonline resources at http://mbed.org.

Возможности

  • STM32 microcontroller in LQFP144 package
  • Two types of extension resources:
    • ST Zio connector including: support for Arduinoв„ў Uno V3 connectivity (A0 to A5, D0 to D15) and additional signals exposing a wide range of peripherals
    • ST morpho extension pin header footprints for full access to all STM32 I/Os
  • ARMВ® mbedв„ў -enabled (see http://mbed.org)
  • On-board ST-LINK/V2-1 debugger/programmer with SWD connector:
    • Selection-mode switch to use the kit as a standalone ST-LINK/V2-1
    • USB re-enumeration capability. Three different interfaces supported on USB: virtual COM port, mass storage, debug port
  • Flexible board power supply:
    • 5 V from ST-LINK/V2-1 USB VBUS
    • External power sources: 3.3 V and 7 - 12 V on ST Zio or ST morpho connectors, 5 V on ST morpho connector
  • USB OTG or full-speed device with Micro-AB connector (depending on STM32 support)
  • IEEE-802.3-2002 compliant Ethernet connector (depending on STM32 support)
  • Three user LEDs
  • Two push-buttons: USER and RESET
  • LSE crystal:
    • 32.768 KHz crystal oscillator
  • Comprehensive free software HAL library including a variety of software examples
  • Support of wide choice of Integrated Development Environments (IDEs) including IARв„ў , KeilВ® , GCC-based IDEs, ARMВ® mbedв„ў

Файлы

Схемы и диаграммы

Быстро получите общее представление о схемотехнике решения

Спецификация (BOM)

Загрузите полный список требуемых компонентов.

STM32 Nucleo-144 development board with STM32F207ZG MCU, supports Arduino, ST Zio and morpho connectivity NUCLEO-F207ZG

Используемые компоненты


Производитель: ST Microelectronics
NUCLEO-F207ZG NUCLEO-F207ZG Цена, руб. Срок поставки Укажите
кол-во:

Отладочная плата NUCLEO-F207ZG с поддержкой Arduino, ST Zio и Morpho PDF ИНФО
2884,50 r
от 2 шт. 2472,50 q
от 3 шт. 2269,50 q
На складе: 17 шт.
STM32F207ZGT6 STM32F207ZGT6 Цена, руб. Срок поставки Укажите
кол-во:

Микроконтроллер - [LQFP-144]; Ядро: ARM Cortex-M3, 32-бит; FLASH: 1 МБайт; RAM: 128 КБайт; АЦПканалов: 24; АЦПразр: 12; АЦПскорость: 2 МГц PDF ИНФО
904,50 r
от 2 шт. 791,50 q
от 5 шт. 678,50 q
от 11 шт. 623,00 q
На складе: 103 шт.

Заметили ошибку в работе сайта?
Скажите нам об этом