Терраэлектроника
Применения > > MCP1601 Buck Regulator Evaluation Board

MCP1601 Buck Regulator Evaluation Board (MCP1601EV)

The MCP1601 Buck Regulator Evaluation Board demonstrates Microchip's MCP1601 Synchronous Buck Regulator, developed for battery powered applications as well as distributed power applications. The MCP1601 Evaluation Board is capable of operation over the entire 2.7V to 5.5V input range of the MCP1601 device. Two 2-position DIP switches are used, one to select the output voltage (1.8V, 2.05V, 2.45V or 3.28V) and one that turns the MCP1601 on and off with the other position selecting the mode of operation (PWM-pulse width modulation or PFM-pulse frequency modulation). Surface mount test points are used to apply power and load in addition to probing several points in the test circuit.

Возможности

    • Operates over a 2.7V to 5.5V input range while delivering 500 mA of output current
    • One of four output voltages can be selected using the on-board switch
    • Low noise fixed frequency PWM operation and light load PFM mode operation can be selected using the on board switch
    • External frequency synchronization can be implemented using a 1 MHz external clock source
    • ON/OFF switch for evaluating startup and shutdown operation

Файлы

Тесты и симуляция

Протестируйте плату по готовым тестам

Печатные платы и ПО

Ускорьте разработку по готовому дизайну

MCP1601 Buck Regulator Evaluation Board MCP1601EV

Заметили ошибку в работе сайта?
Скажите нам об этом