Терраэлектроника
Применения > > Evaluation Kit for the MAX9503G, MAX9503M, MAX9505 (MAX9503GEVKIT)

Evaluation Kit for the MAX9503G, MAX9503M, MAX9505 (MAX9503GEVKIT) (MAX9503GEVKIT)

The MAX9503G evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that evaluates the MAX9503G, as well as the MAX9503M and MAX9505 ICs. All of these ICs filter, amplify, and set the black level to ground for standard-definition video signals. These ICs feature an internal reconstruction filter that has 3dB attenuation at 9MHz, 50dB attenuation at 27MHz, and ±1dB passband flatness to 5.5MHz.

Both the MAX9503G and MAX9505 provide a +6dB gain, while the MAX9503M provides a +12dB gain. The MAX9505 includes an analog switch that can be configured as a video input, a video output, or a microphone input.

Video input and output signals from the EV kit are DC-coupled, eliminating large DC-blocking capacitors. The EV kit's input terminal has 75Ω termination to ground. The EV kit's output has a 75Ω back-termination resistor. The EV kit operates from a single 2.7V to 3.6V power supply.

Файлы

Печатные платы и ПО

Ускорьте разработку по готовому дизайну


Заметили ошибку в работе сайта?
Скажите нам об этом