Терраэлектроника
Применения > > Evaluation Kit for the MAX4090 (MAX4090EVKIT)

Evaluation Kit for the MAX4090 (MAX4090EVKIT) (MAX4090EVKIT)

The MAX4090 evaluation kit (EV kit) provides a proven design to evaluate the MAX4090 3V/5V, 6dB video buffer with sync-tip clamp. The MAX4090 video input terminals have a 75Ω termination resistor to ground, and the output terminals have a 75Ω back-termination resistor. The EV kit operates from a single 2.7V to 5V DC power supply.

The MAX4090 EV kit uses the sag correction configuration. The video input and output signals on the EV kit are AC-coupled.

The MAX4090 can also be used to drive DC-coupled, 150Ω back-terminated video loads in portable video applications. See the Output Signal section in the full data sheet to use the MAX4090 as a DC-coupled output driver.

The MAX4090 EV kit PCB comes with the MAX4090AAUT+ installed. The MAX4090 EV kit can also be used to evaluate the MAX4090EUT+. Contact the factory for free samples of the pin-compatible MAX4090EUT+ device.

Возможности

  • Output Amplifiers with a +6dB Gain
  • Single 2.7V to 5V Supply Operation
  • Jumper-Selectable Enable/Shutdown
  • AC-Coupled Inputs
  • DC- or AC-Coupled Outputs
  • Standard 75Ω Input/Output Terminations
  • Surface-Mount Components
  • Lead(Pb)-Free and RoHS Compliant
  • Fully Assembled and Tested

Файлы

Печатные платы и ПО

Ускорьте разработку по готовому дизайну

Используемые компоненты


Производитель: Maxim Integrated
MAX4090EUT+T MAX4090EUT+T Цена, руб. Срок поставки Укажите
кол-во:

видеобуфер со схемой восстановления постоянной составляющей. Uпит=3/5В. 6dB. -40...+85°С. ИНФО
80,00 r
от 20 шт. 70,00 q
от 57 шт. 60,00 q
от 123 шт. 55,00 q
На складе: 116 шт.

Заметили ошибку в работе сайта?
Скажите нам об этом