Терраэлектроника
Применения > > Evaluation Kit for the MAX1507, MAX1508 (MAX1508EVKIT)

Evaluation Kit for the MAX1507, MAX1508 (MAX1508EVKIT) (MAX1508EVKIT)

The MAX1507/MAX1508 evaluation kit (EV kit) is a complete, fully assembled, and tested circuit board that demonstrates the MAX1507 linear battery charger for a single-cell lithium-ion (Li+) battery. To evaluate the MAX1508, U1 must be removed and replaced with a MAX1508 device. The EV kit safely charges a single Li+ battery to 4.2V. The EV kit accepts a power-supply input of 4.25V to 13V, but disables charging when the input voltage exceeds 7V. Jumpers on the EV kit allow adjustments to the die-temperature regulation levels (MAX1507 only) and the ability to disable the charger. An LED on the board indicates the status of the charging cycle.

Возможности

  • Simple, Stand-Alone Li+ Charger
  • Safely Precharges Deeply Discharged Li+ Cells
  • 4.25V to 13V Input Voltage Range
  • 7V Overvoltage Protection Threshold
  • Resistor-Programmable Charge Current Up to 0.8A
  • Charge Current Monitored by a Resistor
  • Programmable Die-Temperature Regulation Set Points (MAX1507 Only)
  • Active-Low ACOK Output (MAX1508 Only)
  • Fully Assembled and Tested

Файлы

Печатные платы и ПО

Ускорьте разработку по готовому дизайну


Заметили ошибку в работе сайта?
Скажите нам об этом