MAX1640EVKIT (Maxim Integrated )
ОписаниеThe MAX1640 evaluation kit (EV kit) is an adjustable switch-mode current source that operates from a 5.5V to 26V input. It is intended for microprocessor-controlled battery chargers. The charging current, maximum voltage, and pulse-trickle charge are programmed with external resistors. The EV kit is shipped configured for a maximum charge voltage (6 cells). It is configured as a step-down pulse-width modulator (PWM) with synchronous rectification, allowing fast-charge currents up to 1.5A with greater than 90% efficiency. The MAX1640 uses high-side current sense; this allows the load to connect directly to ground, eliminating ground potential errors. The MAX1641 uses low-side current sense.
The MAX1640 EV kit is a fully assembled and tested surface-mount printed circuit board. It can also be used to evaluate the MAX1641.
- 5.5V to 26V Input Voltage Range
- Tight Current-Regulation Accuracy:
- 2% (MAX1641)
- 5% (MAX1640)
- Up to 1.5A Fast-Charge Current
- Up to 500kHz PWM Operation
- Pulse-Trickle Charge Current
- 100% Maximum Duty Cycle (low dropout)
- Synchronous Rectifier
- Surface-Mount Components
- Fully Assembled and Tested