Contact-less Infrared Thermopile Sensor Breakout - TMP007 (ADAFRUIT INDUSTRIES)

Наименование Contact-less Infrared Thermopile Sensor Breakout - TMP007
Производитель ADAFRUIT INDUSTRIES(ADAFRUIT)
Артикул 1933769
Чип/Ядро
Производитель IC
Функция
Особенности

Contact-less Infrared Thermopile Sensor Breakout - TMP007 Unlike most of the other temperature sensors we have, this breakout has a really cool IR sensor from TI that can measure the temperature of an object without touching it! The TMP007 is the latest thermopile sensor from TI, and is an update of the TMP006. The internal math engine does all the temperature calculations so its easier to integrate - you can read the die and target temperatures directly over I2C. The TMP007 also has better transient management, so you don't get as much over/undershoot when the temperature changes a lot. Simply point the sensor towards what you want to measure and it will detect the temperature by absorbing IR waves emitted. The embedded thermopile sensor generates a very very small voltage depending on how much IR there is, and using some math, that micro voltage can be used to calculate the temperature. It also takes the measurement over an area so it can be handy for determining the average temperature of something. This sensor comes as a ultra-small 0.5mm pitch BGA, too hard to solder by hand. So we stuck it on an easy-to-work-with breakout board. The sensor works with 2.5V to 5V logic so it requires no logic level shifting. There are two address pins and using a funky method of connecting the pins you can have up to 8 TMP007's connected to one i2c bus. We also include a small piece of 0.1" breakaway header so you can easily solder to and use this sensor on a breadboard. Two mounting holes make it easy to attach to an enclosure. Of course, we wouldn't just hand you a datasheet and wish you luck, we've written a great tutorial + easy-to-use Arduino library with an example that will have you up and running in 5 minutes. The code can also be ported to any microcontroller with i2c support Dimensions (without headers): 20mm x 21mm x 2mm This board/chip uses I2C 7-bit addresses between 0x40-0x47, selectable with jumpers.

Nano V3.0 (HKSHAN)
от 549,00 Склад (1-2 дн)

Arduino Nano V3.0 (не оригинал) - это маленькое, готовое к использованию и хорошо работающее с макетными платами устройство, разработанное на микроконтроллере ATmega328.…

DFRduino UNO R3 (DFROBOT)
от 1100,00 Склад (1-2 дн)

DFRduino UNO R3 100 % копия оригинальной Arduino UNO R3. Arduino UNO построена на микроконтроллере ATmega328 и конвертере USB-UART на базе ATmega8U2. Плата имеет 14 цифровых каналов ввода/вывода (6 из которых может использоваться в качестве выводов ШИМ), 6 аналоговых каналов вывода, 4 UART, кварцевый генератор на 16 МГц, разъем USB, гнездо питания, колодка ICSP и кнопка сброса.…

Mega 2560 R3 (HKSHAN)
от 895,00 Склад (1-2 дн)

Arduino Mega 2560 (не оригинал) Это плата управления с микроконтроллером ATmega2560. На этой плате есть 54 канала дискретного ввода/вывода (14 каналов можно использовать в режиме ШИМ), 16 аналоговых входов, 4 последовательных порта, резонатор на 16 МГц, разьём USB и кнопка Reset.…

Uno R3 (HKSHAN)
от 520,00 Склад (1-2 дн)

Arduino Uno - R3 - Версия R3 отличается от предыдущих версий конвертером USB-UART на базе ATmega16U2 вместо ранее используемых чипов 8U2 и FTDI

Uno R3 [Atmega 328P-AU+CH340G] (HKSHAN)
от 347,00 Склад (1-2 дн)

Arduino Uno R3 [Atmega 328P-AU+CH340G] по своим характеристикам не чем не отличается от оригинала Arduino UNO R3

В НАЛИЧИИ 10шт.
866,00
Расчет доставки...