Aluminum Scooter Wheel Adapter for 6mm Shaft (Pololu Robotics and Electronics)

Наименование Aluminum Scooter Wheel Adapter for 6mm Shaft
Производитель Pololu Robotics and Electronics(POLOLU)
Артикул 1919388

Pololu Aluminum Scooter Wheel Adapter for 6mm Shaft Алюминиевый адаптер для 37D мотор-редукторов с выходным валом 6 мм This two-part aluminum assembly mounts directly to 6 mm diameter motor output shafts like those on our 37D mm gearmotors and allows you to drive most scooter, skateboard, inline skate, and other common wheels that are compatible with popular 608 ball bearings. Two M4 set screws are included for securing the threaded adapter piece to a motor shaft, and three 14 mm M3 screws are included for clamping the wheel between the threaded adapter piece and the washer. This compact aluminum adapter assembly makes it easy to use many common scooter, skateboard, and inline skate wheels with motors with 6 mm diameter output shafts, enabling many more wheel options for your project. It works with most wheels that are compatible with standard 608 bearings. The adapter consists of two main components: a machined piece with threaded holes that mounts to the motor shaft using the two included M4 set screws, and a flat washer that clamps the wheel to the machined piece using the three included 14 mm M3 screws. The washer has a hole in the center that allows the motor's output shaft to optionally pass through for added flexibility in wheel placement on the shaft, and the low profile of the machined piece lets it work with wheels that have as little as 6 mm of space between where the 608 bearings normally fit. The adapter is straightforward to use when assembled in the proper order. First, slide the threaded shaft mount onto your motor's output shaft with the narrower part facing away from the motor and tighten the set screws. (If your motor has a D-shaft, make sure you align the set screws with the flattened portion of the shaft.) Once this piece is secured, press the wheel directly onto it. Next, align the holes of the washer with the threaded holes of the shaft mount and press the washer into the recess on the other side of the wheel. The diameter of the washer is slightly smaller than that of the threaded shaft mount, so the orientation of the washer should be easier to adjust if the holes are not quite aligned. Finally, insert and tighten the M3 machine screws, making sure to tighten them evenly rather than one at a time. This adapter is intended to work with motors with 6 mm diameter output shafts, and it fits most wheels that are compatible with standard 608 ball bearings. Please see the dimensions below to confirm that it will work with a particular wheel.

Aluminum Scooter Wheel Adapter for 4mm Shaft (POLOLU)
от 308,00 Склад (1-2 дн)

Pololu Aluminum Scooter Wheel Adapter for 4mm Shaft This compact aluminum adapter assembly makes it easy to use many common scooter, skateboard, and inline skate wheels with motors with 4 mm diameter output shafts, enabling many more wheel options for your project.…

Machined Aluminum Bracket for 37D mm Metal Gearmotors (POLOLU)
от 520,00 Склад (1-2 дн)

Pololu Machined Aluminum Bracket for 37D mm Metal Gearmotors Алюминиевый кронштейн для 37D мм мотор-редукторов Шесть отверстий позволяют надежно закрепить мотор на скобе, а три отверстия с резьбой М3 в основании предназначены для установки скобы на шасси.…

50:1 Metal Gearmotor 37Dx54L mm (POLOLU)
Доступно 11 шт. (под заказ)

50:1 Metal Gearmotor 37Dx54L mm (1104) Мотор с металлическим редуктором Этот мотор может работать на напряжениях выше и ниже номинального, рабочий диапазон мотора 3 - 12В.…

3:1 Metal Gearmotor 37Dx52L mm 6V 1660RPM (WZE)
от 574,00 Склад (1-2 дн)

3:1 Metal Gearmotor 37Dx52L mm 6V 1660RPM Реверсно-коллекторный электромотор с металлическим цилиндрическим редуктором и передаточным числом 7,5:1. Имеет диаметр 37 мм, выходной D-образным вал диаметром 6 мм и длиной 14мм.…