MSP430P325IPG (Texas Instruments)

Наименование MSP430P325IPG
Производитель Texas Instruments(TI)
Артикул 191227
OBS Снято с производства
Корпус
Тмакс,°C
Тmin,°C
RAM - память, кБайт
Тактовая частота, Гц
Размер программной памяти, кБайт
Архитектура
Кол-во выводов
Разрядность бит
Количество входов / выходов
Интерфейсы
Напряжение питания Мин
Напряжение питания Макс
Периферийные устройства

MCU, 16BIT, 16K OTP, 512B, 64QFP

SeriesMSP430
Memory Size, OTP16KB
Memory Size, RAM512Byte
I/O lines, No. of8
ADC Inputs, No. of6
Timers, No. of2
Frequency, Clock3.3MHz
Interface TypeUART
Voltage, Supply Min2.7V
Voltage, Supply Max5.5V
Termination TypeSMD
Case StyleQFP
Pins, No. of64
Temperature, Operating Range-40°C to +85°C
IC Generic NumberMSP430P325
Oscillator TypeCrystal

MSP-FET (TI)
от 9700,00 Склад (1-2 дн)

Features USB debugging interface to connect any MSP430 MCU to a computer for real-time, in-system programming and debugging Enables EnergyTrace™ technology for energy measurement and debugging on all MSP430 and MSP432 devices in the Code Composer Studio and IAR Embedded Workbench development environments Supports tri-state mode to show accurate" EnergyTrace power numbers Includes Backchannel UART for bi-directional communication between the MSP430 and a PC.…

MSP430-JTAG-TINY-V2 (OLIMEX)
от 3850,00 Склад (1-2 дн)

FEATURES Suitable for most MSP430Fxxx flash microcontrollers Uses TI standard 2x7 pin JTAG connector Spy-By-Wire support for the newest TI MSP430 devices Can supply the target with 3.3V fixed voltage 50mA maximum current, no short circuit protection(!) The firmware uses version 2 of the MSP430 Debug stack - it is compatible with a large number of software tools Compatible with TI's Code Composer Studio Compatible with IAR Embedded Workbench for MSP430 up to version 5.20.1 software for programming, real time emulation, debugging, step by step program execution, breakpoints, memory dump etc everything all high priced emulators do With IAR Kickstart versions you can write in assembler unlimited code size and to write in C with 2K limit for all MSP430 microcontrollers Works with free GCC C compiler and Insight MSP430 toolchain and debugger Compatible with software tools that have support for MSP430 Debuck Stack version 2 (MSP430.dll v2).…

MSP430-JTAG-ISO-MK2 (OLIMEX)
от 9770,00 Склад (1-2 дн)

MSP430-JTAG-ISO-MK2 – оптоизолированный профессиональный USB JTAG программатор/отладчик для массового программирования

PROG BEEPROG2 (ELNEC)
от 67730,00 Склад (1-2 дн)

Экстремально быстрый универсальный программатор BEEPROG2 с USB/LPT интерфейсом.

PROG BeeProg2C (ELNEC)
от 59950,00 Склад (1-2 дн)

Сверхбыстрый универсальный USB-программатор микросхем от Elnec, пришедший на смену PROG BeeProg+, по сравнению с которым имеет увеличенную скорость программирования NOR Flash и NAND Flash.

MSP430-JTAG (OLIMEX)
от 970,00 Склад (1-2 дн)

FEATURES Program all MSP430Fxxx flash microcontrollers (note: parallel port JTAG doesn't support Spy-Bi-Wire devices because timing from the parallel…