MSP430FR5968IRGZT, MSP430FR5968 (Texas Instruments)

Наименование MSP430FR5968IRGZT
Производитель Texas Instruments(TI)
Артикул 1354018
Корпус
Монтаж
Периферийные устройства Brown-out Detect/Reset, DMA, POR, PWM, WDT
Напряжение питания Макс
Напряжение питания Мин
Интерфейсы I2C, IrDA, SCI, SPI, UART/USART
Количество входов / выходов
Разрядность, бит
Кол-во выводов
Архитектура
Размер программной памяти, кБайт
Тактовая частота, Гц
Серия
RAM - память, кБайт
Тмин,°C
Тмакс,°C
Сравнить В избранное

MSP430FR5968 16 MHz Ultra-Low-Power Microcontroller featuring 48 KB FRAM, 2 KB SRAM, 40 IO 48-VQFN -40 to 85

Описание MSP430FR5968 с сайта производителя

Семейство: MSP430FR5968 MSP430FR5968 16 MHz Ultra-Low-Power Microcontroller featuring 48 KB FRAM, 2 KB SRAM, 40 IO
I2C 1
Timers - 16-bit 5
ADC Channels(#) : 16
Features Real-Time Clock
Operating Temperature Range(C) -40 to 85
Rating Catalog
ADC 12-bit SAR
RAM(KB) 2
Bootloader (BSL) UART
Non-volatile Memory (KB) 48
GPIO Pins(#) 40
Package Group VQFN|48
Comparator Channels (#) 16
Package Size mm2:W x L (PKG) : 48VQFN: 49 mm2: 7 x 7 (VQFN|48)
Special I/O N/A
SPI 3
USB No
UART 2
MSP430FR5968IRGZR (TI)

MSP430FR5968 16 MHz Ultra-Low-Power Microcontroller featuring 48 KB FRAM, 2 KB SRAM, 40 IO 48-VQFN -40 to 85

MSP-FET (TI)
от 12120,00 Склад (1-2 дн)

Features USB debugging interface to connect any MSP430 MCU to a computer for real-time, in-system programming and debugging Enables EnergyTrace™ technology for energy measurement and debugging on all MSP430 and MSP432 devices in the Code Composer Studio and IAR Embedded Workbench development environments Supports tri-state mode to show accurate" EnergyTrace power numbers Includes Backchannel UART for bi-directional communication between the MSP430 and a PC.…

PROG BEEPROG2 (ELNEC)
от 74520,00 Склад (1-2 дн)

Экстремально быстрый универсальный программатор BEEPROG2 с USB/LPT интерфейсом.

ADS1231REF (TI)
Доступно 28 шт. (под заказ)

ADS1231REF Evaluation Module

MSP430-JTAG-TINY-V2 (OLIMEX)
от 4990,00 Склад (1-2 дн)

FEATURES Suitable for most MSP430Fxxx flash microcontrollers Uses TI standard 2x7 pin JTAG connector Spy-By-Wire support for the newest TI MSP430 devices Can supply the target with 3.3V fixed voltage 50mA maximum current, no short circuit protection(!) The firmware uses version 2 of the MSP430 Debug stack - it is compatible with a large number of software tools Compatible with TI's Code Composer Studio Compatible with IAR Embedded Workbench for MSP430 up to version 5.20.1 software for programming, real time emulation, debugging, step by step program execution, breakpoints, memory dump etc everything all high priced emulators do With IAR Kickstart versions you can write in assembler unlimited code size and to write in C with 2K limit for all MSP430 microcontrollers Works with free GCC C compiler and Insight MSP430 toolchain and debugger Compatible with software tools that have support for MSP430 Debuck Stack version 2 (MSP430.dll v2).…

Сравнение позиций

  • ()