RepRap Stepper motors Board Megatronics V2.0 Kit for 3D-printing (SAINSMART)

Наименование RepRap Stepper motors Board Megatronics V2.0 Kit for 3D-printing
Производитель SAINSMART(SSMART)
Артикул 1287064

RepRap Stepper motors Board Megatronics V2.0 Kit for 3D-printing - Megatronics is based on many famous open-source products including: Arduino Mega 2560, RAMPS, SD Ramps. Therefor this product is an already proven design. It combines all major features of these board into a single board solution for more reliable 3D-printing. Megatronics has a powerful Atmega2560 processor with 256 kB memory, running at 16Mhz. The board can be connected to a PC using a normal USB cable. It will register as FTDI FT232R device. The board is compatible with the Arduino Mega 2560 and will therefor be easily programmed from the Arduino IDE.What's more. We will offer you a detailed tutorial including project introduction and their source code.

Description:

Megatronics is based on many famous open-source products including: Arduino Mega 2560, RAMPS, SD Ramps. Therefor this product is an already proven design. It combines all major features of these board into a single board solution for more reliable 3D-printing. Megatronics has a powerful Atmega2560 processor with 256 kB memory, running at 16Mhz. The board can be connected to a PC using a normal USB cable. It will register as FTDI FT232R device. The board is compatible with the Arduino Mega 2560 and will therefor be easily programmed from the Arduino IDE.What's more. We will offer you a detailed tutorial including project introduction and their source code.

RepRap Stepper motors Board Megatronics V2.0 Kit for 3D-printing

Specification:

  • Microcontroller: Atmega2560-16AU;
  • Operating Voltage Electronics: 5V;
  • Operating Voltage High: 12-24 V (15A heated bed, 7A electronics);
  • DC Current per I/O Pin: 40 mA;
  • Clock Speed:16 Mhz.

Features:

  • Improved thermo couple support;
  • Second thermo couple supported;
  • Support for 6 stepper drivers;
  • SMD fuses and MOSFETs;
  • Extra MOSFET, making 4 regular MOSFETs and one for heated bed;
  • Support for the new DRV8825 Pololu stepper drivers;
  • The board can be powered from 12V1 (12V MAX), by setting a jumper;
  • The LCD contrast can be adjusted with a trimpot;
  • 12V1 has a diode to protect against reverse polarization;
  • The 5V line is protected by a 500mA resettable fuse;
  • A piezo is included to allow the printer to give feedback with sound;
  • Each stepper driver slot has a breakout to connect external stepper drivers to the board;
  • Four layer high quality PCB board.
Stepper Motor (SPARKFUN)
от 653,00 Склад (1-2 дн)

Небольшой биполярный шаговый мотор для различных DIY проектов. Шаг Угла (в градусах) : 7.5 Номинальное Напряжение : 12V Номинальный Ток : 400 мА 3 мм…

DRV8824 Stepper Motor Driver Carrier (POLOLU)
от 380,00 Склад (1-2 дн)

Драйвер DRV8824 для микрошаговых биполярных двигателей. The DRV8824 stepper motor driver carrier is a breakout board for TI's DRV8824 microstepping bipolar stepper motor driver, a lower-current version of the DRV8825.…

Stepper Motor:1200 (POLOLU)
от 1190,00 Склад (1-2 дн)

Гибридный шаговый двигатель может быть использован в качестве однополярного или биполярного шагового двигателя.

A4988 Stepper Motor Driver Carrier (POLOLU)
от 327,00 Склад (1-2 дн)

Драйвер для шагового двигателя на базе микросхемы A4988. Позволяет управлять биполярным шаговым двигателем с потребляемым током до 2 A на обмотку. Напряжение 3...5,5 В для для питания цифровой части и 8...35 В для двигателя. Пять видов шага: полный шаг, полшага, четверть шага, 1/8 и 1/16 шага. Для токов более 1А на катушку рекомендуется использовать радиатор.

Dual Bipolar Stepper Motor Shield for Arduino [A4988] (DFROBOT)
от 1310,00 Склад (1-2 дн)

Introduction Do you want to do some projects with stepper motors such as an auto curtain, a XY Plotter, or a 3D printer? Generally, it's not an easy thing to drive stepper motor(s) with Arduino; but with this stepper motor shield, you can easily control 2 stepper motors via just 4 digital I/O's.…

DRV8825 Stepper Motor Driver Carrier (POLOLU)
от 446,00 Склад (1-2 дн)

Новый драйвер шагового двигателя DRV8825, который может использоваться как замена драйверу A4988 Stepper Motor Driver Carrier. - Simple step and direction…