Motor/Stepper/Servo Shield for Arduino Kit - v2.0 (ADAFRUIT INDUSTRIES)

Наименование Motor/Stepper/Servo Shield for Arduino Kit - v2.0
Производитель ADAFRUIT INDUSTRIES(ADAFRUIT)
Артикул 1210651

Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit - v2.3 The original Adafruit Motorshield kit is one of our most beloved kits, which is why we decided to make something even better. We have upgraded the shield kit to make the bestest, easiest way to drive DC and Stepper motors. This shield will make quick work of your next robotics project! We kept the ability to drive up to 4 DC motors or 2 stepper motors, but added many improvements: Instead of a L293D darlington driver, we now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well. Instead of using a latch and the Arduino's PWM pins, we have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or shields to the same pins. This also makes it drop-in compatible with any Arduino, such as the Uno, Leonardo and Mega R3. (Due's Wire support is still in beta, but once that works well we can test it on the Due) Completely stackable design: 5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project. Lots of other little improvements such as a polarity protection FET on the power pins and a bit of prototyping area. And the shield is assembled and tested here at Adafruit so all you have to do is solder on straight or stacking headers and the terminal blocks. Lets check out these specs again: 2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution dedicated timer - no jitter! 4 H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping. Motors automatically disabled on power-up Big terminal block connectors to easily hook up wires (18-26AWG) and power Arduino reset button brought up top Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies Tested compatible with Arduino UNO, Leonardo, ADK/Mega R3, Diecimila & Duemilanove. Works with Mega/ADK R2 and earlier with 2 wire jumpers. Download the easy-to-use Arduino software library, check out the examples and you're ready to go! Comes with an assembled & tested shield, terminal block, plain header, jumper. Some soldering is required to assemble the headers on. Stacking headers not included, but we sell them in the shop so if you want to stack shields, please pick them up at the same time. Arduino and motors are not included but we have lots of motors in the shop and all our hobby servos, DC motors, and stepper motors work great. Dimensions, assembled: 70mm x 55mm x 10mm 2.7"x2.1"x0.4"

Mega 2560 R3 (HKSHAN)
от 895,00 Склад (1-2 дн)

Arduino Mega 2560 (не оригинал) Это плата управления с микроконтроллером ATmega2560. На этой плате есть 54 канала дискретного ввода/вывода (14 каналов можно использовать в режиме ШИМ), 16 аналоговых входов, 4 последовательных порта, резонатор на 16 МГц, разьём USB и кнопка Reset.…

Nano V3.0 (HKSHAN)
от 549,00 Склад (1-2 дн)

Arduino Nano V3.0 (не оригинал) - это маленькое, готовое к использованию и хорошо работающее с макетными платами устройство, разработанное на микроконтроллере ATmega328.…

FRDM-KL25Z Eval board (EMBEST)

Макетная плата на базе новейшего Cortex-M0+ микроконтроллера Kinetis KL25Z128VLK4 от Freescale. SWD, USB Arduino

Cyclone V GX Starter Kit (TERASIC)
от 17380,00 Склад (1-2 дн)

Отладочный набор на базе ПЛИС 5CGXFC5C6F27C7N семейства Cyclone V GX. USB-UART, USB-JTAG, HDMI, HSMC, microSD, ArdH, A

Uno R3 [Atmega 328P-AU+CH340G] (HKSHAN)
от 347,00 Склад (1-2 дн)

Arduino Uno R3 [Atmega 328P-AU+CH340G] по своим характеристикам не чем не отличается от оригинала Arduino UNO R3

Uno R3 (HKSHAN)
от 520,00 Склад (1-2 дн)

Arduino Uno - R3 - Версия R3 отличается от предыдущих версий конвертером USB-UART на базе ATmega16U2 вместо ранее используемых чипов 8U2 и FTDI

Motor party add-on pack for Arduino (ADAFRUIT)
от 2720,00 Склад (1-2 дн)

Motor party add-on pack for Arduino Make your own Arduino motor party with a motor shield and a fine assortment of motors! New! we've upgraded the shield to our new version 2, with more powerful drivers, and uses fewer pins to boot! Included in this add-on pack is: Motor shield V2 for Arduino 6 volt DC hobby motor Small stepper motor Standard size servo Micro size servo An Arduino is not included, and you'll need one to use the shield.…

В НАЛИЧИИ 2шт.
1330,00
Расчет доставки...