Hitachi H48C Tri-Axis Accelerometer, Parallax, Inc.

Hitachi® H48C 3-Axis Accelerometer Module 3-осевой акселерометр General Description The Hitachi H48C 3-Axis Accelerometer is an integrated module that can sense gravitational (g) force of ±3g on three axes (X, Y, and Z). The module contains an onboard regulator to provide 3.3-volt power to the H48C, analog signal conditioning, and an MCP3204 (four channel, 12-bit) analog-to-digital converter to read the H48C voltage outputs. All components are mounted on a breadboard-friendly, 0.7 by 0.8 inch module. Acquiring measurements from the module is simplified through a synchronous serial interface. With the BASIC Stamp® 2 series, for example, this is easily handled with the SHIFTOUT and SHIFTIN commands. Features • Measure ±3 g on any axis • Uses MEMS (Micro Electro-Mechanical System) technology, with compensation for calibration-free operation • Onboard regulator and high-resolution ADC for simple connection to microcontroller host - compatible with BASIC Stamp 2 series SHIFTOUT and SHIFTIN commands • Free-fall output indicates simultaneous 0g an all axes • Small, breadboard-friendly package: 0.7" x 0.8" (17.8 mm x 20.3 mm) • Wide operational range: -25° to 75° C Application Ideas • Tilt measurement in robotics applications • Multi-axis vibration measurement in transit and shipping systems • Multi-axis movement/lack-of-movement for alarm systems Packing List Verify that your H48C Accelerometer kit is complete in accordance with the list below: • Hitachi H48C 3-Axis Accelerometer module • Documentation

Hitachi H48C Tri-Axis Accelerometer, Parallax, Inc.

Параметры Hitachi H48C Tri-Axis Accelerometer

НаименованиеHitachi H48C Tri-Axis Accelerometer
ПроизводительParallax, Inc. (PARALLAX)

Сопутствующие товары для Hitachi H48C Tri-Axis Accelerometer

  • Изображение  AltIMU-10 v4 Gyro. Accelerometer. Compass. and Altimeter

    AltIMU-10 v4 Gyro. Accelerometer. Compass. and Altimeter

    Склад (1-2 дн)

    AltIMU-10 Gyro. Accelerometer. Compass. and Altimeter Pololu AltIMU-10 v4 является инерциальным измерительным устройством на основе микросхем L3GD20H гироскоп и LSM303D акселерометр и магнитный датчик как MinIMU-9 и добавленный LPS25H барометр.…

Цена (включая НДС)
1071,50 руб
Наличие на складах
Нет на складе,
сообщить о поступлении
Уведомить о поступлении

Заметили ошибку в работе сайта?
Скажите нам об этом