Печатная плата общего назначения для разработки собственных нестандартных конструкций электроники.
The Pololu 5" round prototyping printed circuit board (PCB) is a general-purpose prototyping board for developing your own custom electronics designs. Slightly larger than a CD, our round PCB is unique because of its circular shape, which matches perfectly with our round robot chassis using standoffs. The circular PCB is also well-suited to other applications in which aesthetic considerations or size constraints make a round PC board preferable.
This high-quality, double-sided prototyping PCB has a total of 1,780 plated-through holes, most of which are 0.042" in diameter. The PCB has a solder mask on both sides, enabling cleaner soldering and preventing short circuits. Many of the pads are connected in groups of three to make for easy prototyping, with the connections clearly indicated on the top silkscreen. All holes are on a 0.1" grid, except for special footprints (hole patterns) for a DB9 connector, a DC power jack, and a switch. (These footprints are positioned so that the corresponding components fit within the 5" circle, without sticking out.)
5" diameter circular PC board
Standard 0.1" grid
1,780 plated-through holes
1,733 general-purpose, 0.042"-diameter holes
26 larger, 0.068"-diameter holes on bus strips for test points or thicker wires
Four 0.125" mounting holes compatible with our round robot chassis
Special footprints for a DB9 connector, DC power jack, and switch
Ten bus strips
Most pads connected in groups of two or three, similar to a breadboard
Silkscreen clearly indicates connections
Solder mask on both sides