Ваш город: Москва
+7 (495) 221-78-04
+7 (812) 327-327-1

ISO72XEVM, Texas Instruments


View Image The ISO721 and ISO722 are digital isolators with a logic input and output buffer separated by a silicon oxide (SiO2) insulation barrier. This barrier provides galvanic isolation of up to 4000V. Used in conjunction with isolated power supplies, these devices prevent noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry. A binary input signal is conditioned, translated to a balanced signal, then differentiated by the capacitive isolation barrier. Across the isolation barrier, a differential comparator receives the logic transition information, then sets or resets a flip-flop and the output circuit accordingly. A periodic update pulse is sent across the barrier to ensure the proper dc level of the output. If this dc-refresh pulse is not received for more than 4us, the input is assumed to be unpowered or not functional, and the failsafe circuit drives the output to a logic high state. The symmetry of the dielectric and capacitor within the integrated circuitry provides for close capacitive matching and allows fast transient voltage changes between the input and output grounds without corrupting the output. The small capacitance and resulting time constant provide for very fast operation with signaling rates† from 0Mbps (DC) to 100Mbps for the ISO721/ISO722, and 0Mbps to 150Mbps with the ISO721M/ISO722M. These devices require two supply voltages of 3.3V, 5V, or any combination. All inputs are 5V tolerant when supplied from a 3.3V supply and all outputs are 4mA CMOS. ISO722 device includes an active-low output enable that when driven to a high logic level, places the output in a high-impedance state and turns off internal bias circuitry to conserve power. Both the ISO721 and ISO722 have TTL input thresholds and a noise-filter at the input that prevents transient pulses of up to 2ns in duration from being passed to the output of the device. The ISO721M and ISO722M have CMOS Vcc/2 input thresholds and do not have the input noise-filter and the additional propagation delay. These features of the ISO721M also provide for reduced jitter operation. These devices also provide for glitch-free power up/down operation when powered up/down in typical applications. For more information, see Theory of Operation in the Application Information section. The ISO721 and ISO721M are characterized for operation over the ambient temperature range of -40°C to 125°C. † The signaling rate of a line is the number of voltage transitions that are made per second expressed in the units bps (bits per second)


  • 4000Vpeak Isolation
    • UL 1577, IEC 60747-5-2 (VDE 0884, Rev. 2)
    • IEC 61010-1 and CSA Approved
    • 25 kV/us Transient Immunity
  • Signaling Rate 0Mbps to 150Mbps
    • Low Propagation Delay
    • Low Pulse Width Distortion
  • Low-Power Sleep Mode
  • High Electromagnetic Immunity
  • Low Input Current Requirement
  • Failsafe Output
  • Drop-in Replacement for Most Opto & Magnetic Isolators

ISO72XEVM, Texas Instruments

Параметры ISO72XEVM

Наименование ISO72XEVM
Производитель Texas Instruments (TI)
Артикул 329811
Производитель IC

Сопутствующие товары для ISO72XEVM

Показать все сопутствующие товары
Цена (включая НДС)
4100,00 руб
от 2 шт. 3770,00 руб
Наличие на складе
Нет на складе,
сообщить о поступлении
Уведомить о поступлении
поиск по складам

Заметили ошибку в работе сайта?
Скажите нам об этом