ADXL335 three axis acceleration tilt angle sensor, LCTECH
ADXL335 three axis acceleration tilt angle analog output acceleration sensor Overview LC ADXL335 three-axis accelerator module. ADXL335 board is a lightweight and low power consumption of 3 axis accelerometer with signal output voltage adjustment. Product measuring acceleration minimum full range is ±3g.In the inclination measurement application it can measure the acceleration of gravity, static and dynamic acceleration, shock, or vibration caused by movement. The function and characteristics X, Y, Z three directions can be detected on the acceleration The output of the acceleration as the analog Module working voltage is 5v Provide the Arduino test procedures Introduced the hardware and instructions Size: 21x15 mm The board function description: VCC, GND: 5 V power input (3.3 V voltage regulator chip board); X, Y, Z: three direction of the acceleration simulation output; ADXL335 chip on the module power supply voltage of 3.3 V, must be attention to the development board used when testing the reference voltage (AREF).