Ваш город: Москва
+7 (495) 221-78-04
+7 (812) 327-327-1
Терраэлектроника

LPC2104BBD48.151, NXP SEMICONDUCTORS

32BIT MCU 128K FLASH, SMD, LPC2104

SeriesLPC2
Memory Size, Flash128KB
Memory Size, RAM16KB
I/O lines, No. of32
Timers, No. of4
PWM Channels, No of6
Frequency, Clock60MHz
Interface TypeI2C, SPI, UART
Voltage, Supply Min3V
Voltage, Supply Max3.6V
Termination TypeSMD
Case StyleLQFP
Pins, No. of48
Temperature, Operating Range0°C to +70°C
Temp, Op. Max70°C
Temp, Op. Min0°C
Base Number2104
Bits, No. of32
Bits, Number In Timer32
IC Generic NumberLPC2104
Interrupts, External No. of3
Logic Function Number2104
Memory Size128K
Memory TypeFLASH
Microprocessor/Controller Features16/32 bit ARM7TDMI-S processor, 16/32/64 kB on-chip Static RAM, 128 kB on-chip Flash Program Memory, In-System Programming (ISP) and In-Application Programming (IAP), Vectored Interrupt Controller, EmbeddedICE-RT interface, Embedded Trace Macrocell
Oscillator TypeOn-chip crystal
RAM Size16Byte
Serial Comms2xUART, I2C, SPI
Temperature Range, ICCommercial
Voltage, Vcc3.6V


LPC2104BBD48.151, NXP SEMICONDUCTORS

Параметры LPC2104BBD48.151

Наименование LPC2104BBD48.151
Производитель NXP SEMICONDUCTORS (NXP)
Артикул 157208
Тмакс,°C
Корпус
Периферийные устройства
Напряжение питания Макс
Напряжение питания Мин
Интерфейсы
Количество входов / выходов
Разрядность
Кол-во выводов
Архитектура
Размер программной памяти, кБайт
Тактовая частота, Гц
RAM - память, кБайт

Аналоги LPC2104BBD48.151, доступные на складе

Средства разработки для LPC2104BBD48.151

  • Изображение  PROG BeeProg2C

    PROG BeeProg2C
    ELNEC

    Склад (1-2 дн)

    Профессиональный программатор микросхем с колодкой с нулевым усилием DIL-48, интерфейсами USB 2.0 High-Speed 480МБ/сек и LPT. Функция внутрисхемного программирования MCU, PLD и Serial E(E)PROM. Встроенный источник питания.

  • Изображение  J-Link Plus

    J-Link Plus
    SEGGER

    Склад (1-2 дн)

    Features Comes with integrated licenses for: Unlimited breakpoints in flash memory (Unlimited Flash Breakpoints), RDI / RDDI and J-Flash Fully compatible to the standard J-Link Direct download into flash memory of most popular microcontrollers supported Supported CPUs: ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5, Microchip PIC32 and Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N Download speed up to 1 MByte/second Supports unlimited breakpoints in flash memory! Setting breakpoints in external flash memory of Cortex-M systems is possible with J-Link's Unlimited Flash Breakpoints technology only! Supported by all major IDEs Free software updates, 1 year of support Supports concurrent access to CPU by multiple applications2 Crossplatform support (runs on Windows, Linux, Mac OS X)3 Intelligence in the debug probe firmware Remote Server included.…

  • Изображение  FLASHER ARM

    FLASHER ARM
    SEGGER

    Склад (1-2 дн)

    JTAG программатор ARM7/ARM9/Cortex-M3 микроконтроллеров.USB, JTAG

  • Изображение  PROG BEEPROG2

    PROG BEEPROG2
    ELNEC

    Склад (1-2 дн)

    Экстремально быстрый универсальный программатор BEEPROG2 с USB/LPT интерфейсом.

  • Изображение  ARM-USB-OCD-H

    ARM-USB-OCD-H
    OLIMEX

    Склад (1-2 дн)

    FEATURES First on market three-in-one USB JTAG debugger - offers JTAG + RS232 (full modem signals supported) port + power supply all in one compact device Adds virtual RS232 port to your computer with all modem signals like: DTR, DSR, DCD, RTS, CTS, Rx, Tx Debugs all ARM microcontrollers with JTAG interface supported by OpenOCD High speed USB 2.0 with lower latency time, RTCK adaptive JTAG clock up to 30Mhz and higher throughput achieve x3-x5 times faster programming speed than ARM-USB-OCD Auto-detected powering to your target board with up to 200mA at 5V Uses ARM's standard JTAG connector (2 rows ? 10 pins at 0.1'' step) Supports ARM targets working in voltage range 1.65 - 5.0 V DC Supports adaptive clocking RTCK Able to power a target board via a standard DC barrel jack; cable for the external powering included - 2.1x5.5x14mm female connectors at both ends Supported by the open-source community and OpenOCD debugger software Downloadable Windows installer for full featured and open source tools as alternative to the commercial ARM development packages: GCC C compiler, OpenOCD debugger and Eclipse IDE.…

  • Изображение  J-LINK ULTRA+

    J-LINK ULTRA+
    SEGGER

    Склад (1-2 дн)

    Features Comes with integrated licenses for: Unlimited breakpoints in flash memory (Unlimited Flash Breakpoints), RDI / RDDI and J-Flash Fully compatible to the standard J-Link Very high performance for all supported CPU cores Download speed up to 3 MByte/second Hi-Speed USB 2.0 interface Serial Wire Debug (SWD) supported Serial Wire Viewer (SWV) supported Maximum target interface speed 50 MHz Maximum SWO sampling speed 100 MHz Target power can be supplied Target power consumption can be measured with high accuracy.…

Показать все средства разработки

Изображения LPC2104BBD48.151

LPC2104BBD48.151, NXP SEMICONDUCTORS LPC2104BBD48.151, NXP SEMICONDUCTORS LPC2104BBD48.151, NXP SEMICONDUCTORS
НА СКЛАДЕ
Цена (включая НДС)
554,00 руб
от 3 шт. 485,00 руб
от 8 шт. 416,00 руб
от 16 шт. 382,00 руб
Наличие на складе
Нет на складе,
сообщить о поступлении
Уведомить о поступлении
поиск по складам

Заметили ошибку в работе сайта?
Скажите нам об этом