Терраэлектроника

RepRap сontroller for 3D printer Ultimaker1.5.7 Similar Ramps1.4, SAINSMART

RepRap сontroller for 3D printer Ultimaker1.5.7 Similar Ramps1.4 - this is a board that's very similar to other Pololu-based electronics implementations, including RAMPS, but it can support up to 5 steppers (three for X, Y, Z, one for an extruder and one for any other function). You can add as many stepper driver carriers as youneed. It is designed to run at higher voltages than 12 Volts, This allows you to put 90 Watts out of one MOSFET and run your stepper motors with more torque and higher maximum speeds. This board is also used on the Mantis-30 milling machine from Protospace and on various Mendel's that people have built.

Description:

This is a board that's very similar to other Pololu-based electronics implementations, including RAMPS, but it can support up to 5 steppers (three for X, Y, Z, one for an extruder and one for any other function). You can add as many stepper driver carriers as youneed. It is designed to run at higher voltages than 12 Volts, This allows you to put 90 Watts out of one MOSFET and run your stepper motors with more torque and higher maximum speeds. This board is also used on the Mantis-30 milling machine from Protospace and on various Mendel's that people have built.

RepRap controller for 3D printer Ultimaker

Feature:

  • Plug in all motors with simple 4-way JST connectors;
  • Made for Ultimaker's UltiStepper Driver;
  • Compatible with Pololu stepper driver boards;
  • Controls up to 5 stepper motors (3 for the X, Y and Z axis one for an extruder (the "E axis"), optionally you can add another axis by adding a Pololu stepper driver;
  • Configurable step sizes by placing jumpers;
  • 3x 55 Amp MOSFETs outputs (with LED indicators. Actual current capability limited by PCB and connectors);
  • All pins are broken out for maximum extensibility;
  • Runs from 15V to 19V;
  • Three thermocouple inputs, or thermistor inputs. The 100K thermistor is recommended;
  • Has a IDC header for adding an LCD panel (movie here);
  • Has a header for adding an SD card module;
  • A toggle-switch for powering up/down the board;
  • Easier to wire up thermocouples;
  • Includes a 12V regulator for an (always on) fan to cool the electronics;
  • A PWM output with power for LED arrays and other lighting;
  • LCD backlight dimming can now be software controlled;
  • A serial I/O header for bluetooth and ethernet add-ons;
  • Servo outputs for experimental setups. They need to be interrupt or software driven as the pins routed to the servo header I/O do not have PWM.

RepRap сontroller for 3D printer Ultimaker1.5.7 Similar Ramps1.4, SAINSMART

Параметры RepRap сontroller for 3D printer Ultimaker1.5.7 Similar Ramps1.4

НаименованиеRepRap сontroller for 3D printer Ultimaker1.5.7 Similar Ramps1.4
ПроизводительSAINSMART (SSMART)
Артикул1287066

Документация для RepRap сontroller for 3D printer Ultimaker1.5.7 Similar Ramps1.4

Аналоги RepRap сontroller for 3D printer Ultimaker1.5.7 Similar Ramps1.4, доступные на складе

Сопутствующие товары для RepRap сontroller for 3D printer Ultimaker1.5.7 Similar Ramps1.4

  • Изображение  3D Printer Kit for RepRap

    3D Printer Kit for RepRap
    SSMART

    Mega2560+ Smart LCD 2004 Контроллер A4988 + Ultimaker 1.5.7 3D Принтер Комплект Для RepRap НАБОР ДЛЯ СБОРКИ 3В принтера . В КОМПЛЕКТЕ 5 МОДУЛЕЙ: ПЛАТА УПРАВЛЕНИЯ ШАГОВЫМИ ДВИГАТЕЛЯМИ , КОНТРОЛЛЕР УПРАВЛЕНИЯ Sainsmart MEGA 2560 R3 НА БАЗЕ ATmega2560, МОДУЛЬ УПРАВЛЕНИЯ ЖК, МОДУЛЬ УПРАВЛЕНИЯ ДЛЯ 3Д ПРИНТЕРА, USB-кабель, СОЕДИНИЕТЛЬНЫЕ КАБЕЛИ This is the new SainSmart 3D Printer Starter Kit, developed specially for those beginners who are interested in 3D printer.…

Изображения RepRap сontroller for 3D printer Ultimaker1.5.7 Similar Ramps1.4

RepRap сontroller for 3D printer Ultimaker1.5.7 Similar Ramps1.4, SAINSMART RepRap сontroller for 3D printer Ultimaker1.5.7 Similar Ramps1.4, SAINSMART RepRap сontroller for 3D printer Ultimaker1.5.7 Similar Ramps1.4, SAINSMART RepRap сontroller for 3D printer Ultimaker1.5.7 Similar Ramps1.4, SAINSMART RepRap сontroller for 3D printer Ultimaker1.5.7 Similar Ramps1.4, SAINSMART
НА СКЛАДЕ
Цена (включая НДС)
4511,00 руб
Наличие на складе
2 шт.
поиск по складам

Заметили ошибку в работе сайта?
Скажите нам об этом