Ваш город: Москва
+7 (495) 221-78-04
+7 (812) 327-327-1
Терраэлектроника

RepRap Stepper motors Board Megatronics V2.0 Kit for 3D-printing, SAINSMART

RepRap Stepper motors Board Megatronics V2.0 Kit for 3D-printing - Megatronics is based on many famous open-source products including: Arduino Mega 2560, RAMPS, SD Ramps. Therefor this product is an already proven design. It combines all major features of these board into a single board solution for more reliable 3D-printing. Megatronics has a powerful Atmega2560 processor with 256 kB memory, running at 16Mhz. The board can be connected to a PC using a normal USB cable. It will register as FTDI FT232R device. The board is compatible with the Arduino Mega 2560 and will therefor be easily programmed from the Arduino IDE.What's more. We will offer you a detailed tutorial including project introduction and their source code.

Description:

Megatronics is based on many famous open-source products including: Arduino Mega 2560, RAMPS, SD Ramps. Therefor this product is an already proven design. It combines all major features of these board into a single board solution for more reliable 3D-printing. Megatronics has a powerful Atmega2560 processor with 256 kB memory, running at 16Mhz. The board can be connected to a PC using a normal USB cable. It will register as FTDI FT232R device. The board is compatible with the Arduino Mega 2560 and will therefor be easily programmed from the Arduino IDE.What's more. We will offer you a detailed tutorial including project introduction and their source code.

RepRap Stepper motors Board Megatronics V2.0 Kit for 3D-printing

Specification:

  • Microcontroller: Atmega2560-16AU;
  • Operating Voltage Electronics: 5V;
  • Operating Voltage High: 12-24 V (15A heated bed, 7A electronics);
  • DC Current per I/O Pin: 40 mA;
  • Clock Speed:16 Mhz.

Features:

  • Improved thermo couple support;
  • Second thermo couple supported;
  • Support for 6 stepper drivers;
  • SMD fuses and MOSFETs;
  • Extra MOSFET, making 4 regular MOSFETs and one for heated bed;
  • Support for the new DRV8825 Pololu stepper drivers;
  • The board can be powered from 12V1 (12V MAX), by setting a jumper;
  • The LCD contrast can be adjusted with a trimpot;
  • 12V1 has a diode to protect against reverse polarization;
  • The 5V line is protected by a 500mA resettable fuse;
  • A piezo is included to allow the printer to give feedback with sound;
  • Each stepper driver slot has a breakout to connect external stepper drivers to the board;
  • Four layer high quality PCB board.

RepRap Stepper motors Board Megatronics V2.0 Kit for 3D-printing, SAINSMART

Параметры RepRap Stepper motors Board Megatronics V2.0 Kit for 3D-printing

Наименование RepRap Stepper motors Board Megatronics V2.0 Kit for 3D-printing
Производитель SAINSMART (SSMART)
Артикул 1287064

Документация для RepRap Stepper motors Board Megatronics V2.0 Kit for 3D-printing

Аналоги RepRap Stepper motors Board Megatronics V2.0 Kit for 3D-printing, доступные на складе

Сопутствующие товары для RepRap Stepper motors Board Megatronics V2.0 Kit for 3D-printing

  • Изображение  3D Printer Kit for RepRap

    3D Printer Kit for RepRap
    SSMART

    Mega2560+ Smart LCD 2004 Контроллер A4988 + Ultimaker 1.5.7 3D Принтер Комплект Для RepRap НАБОР ДЛЯ СБОРКИ 3В принтера . В КОМПЛЕКТЕ 5 МОДУЛЕЙ: ПЛАТА УПРАВЛЕНИЯ ШАГОВЫМИ ДВИГАТЕЛЯМИ , КОНТРОЛЛЕР УПРАВЛЕНИЯ Sainsmart MEGA 2560 R3 НА БАЗЕ ATmega2560, МОДУЛЬ УПРАВЛЕНИЯ ЖК, МОДУЛЬ УПРАВЛЕНИЯ ДЛЯ 3Д ПРИНТЕРА, USB-кабель, СОЕДИНИЕТЛЬНЫЕ КАБЕЛИ This is the new SainSmart 3D Printer Starter Kit, developed specially for those beginners who are interested in 3D printer.…

  • Изображение  DRV8825 Stepper Motor Driver Carrier

    DRV8825 Stepper Motor Driver Carrier
    POLOLU

    Склад (1-2 дн)

    Новый драйвер шагового двигателя DRV8825, который может использоваться как замена драйверу A4988 Stepper Motor Driver Carrier. - Simple step and direction…

  • Изображение  Stepper Motor:1208

    Stepper Motor:1208
    POLOLU

    Stepper Motor: Bipolar, 200 Steps/Rev, 35x28mm, 10V, 500mAОписаниеЭтот гибридный шаговый мотор имеет величину шага 1,8° (200 шагов на оборот). 500 mA на катушку при 10 В обеспечивют удерживающий момент в 1000 г*см (14 oz-in). Мотор и

  • Изображение  Stepper Motor:1209

    Stepper Motor:1209
    POLOLU

    Stepper Motor: Bipolar, 200 Steps/Rev, 35x36mm, 2.7V, 1000mAЭтот гибридный шаговый мотор имеет шаг величиной 1,8° (200 шагов на оборот). 1000 mA на катушку при 2,7В обеспечивют удерживающий момент в 1400 г*см (20 oz-in).ОписаниеЭ

  • Изображение  DRV8824 Stepper Motor Driver Carrier

    DRV8824 Stepper Motor Driver Carrier
    POLOLU

    Склад (1-2 дн)

    Драйвер DRV8824 для микрошаговых биполярных двигателей. The DRV8824 stepper motor driver carrier is a breakout board for TI's DRV8824 microstepping bipolar stepper motor driver, a lower-current version of the DRV8825.…

  • Изображение  NEMA 17 Hybrid Stepper Motor

    NEMA 17 Hybrid Stepper Motor
    MBOT

    Шаговый двухфазный двигатель постоянного тока. Напряжение 4 В, ток 1,2 А; мощность 4,8 Вт; диаметр вала: 5 мм "D".

Показать все сопутствующие товары

Изображения RepRap Stepper motors Board Megatronics V2.0 Kit for 3D-printing

RepRap Stepper motors Board Megatronics V2.0 Kit for 3D-printing, SAINSMART RepRap Stepper motors Board Megatronics V2.0 Kit for 3D-printing, SAINSMART RepRap Stepper motors Board Megatronics V2.0 Kit for 3D-printing, SAINSMART RepRap Stepper motors Board Megatronics V2.0 Kit for 3D-printing, SAINSMART
НА СКЛАДЕ
Запросить цену
По запросу
Наличие на складе
Нет на складе,
сообщить о поступлении
Уведомить о поступлении
поиск по складам

Заметили ошибку в работе сайта?
Скажите нам об этом