Ваш город: Москва
+7 (495) 221-78-04
+7 (812) 327-327-1
Терраэлектроника

Micro Lipo - USB LiIon/LiPoly charger - v1, ADAFRUIT INDUSTRIES

Micro Lipo - USB LiIon/LiPoly charger - v1 Oh so adorable, this is the tiniest little lipo charger, so handy you can keep it any project box! Its also easy to use. Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end. There are two LEDs - one red and one green. While charging, the red LED is lit. When the battery is fully charged and ready for use, the green LED turns on. Seriously, it could not get more easy. Charging is performed in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-voltage trickle charge to keep the battery topped-up. The charge current is 100mA by default, so it will work with any size battery and USB port. If you want you can easily change it over to 500mA mode by soldering closed the jumper on the back, for when you'll only be charging batteries with 500mAh size or larger. Comes assembled and tested with a free bonus JST cable! 5V input via PCB-style USB connector For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells) 100mA charge current, adjustable to 500mA by soldering a jumper closed Free 2-pin JST cable included! Batteries not included. Dimensions: 30mm x 12.5mm x 8mm (1.2in x 0.3in x 0.3in)


Micro Lipo - USB LiIon/LiPoly charger - v1, ADAFRUIT INDUSTRIES

Параметры Micro Lipo - USB LiIon/LiPoly charger - v1

Наименование Micro Lipo - USB LiIon/LiPoly charger - v1
Производитель ADAFRUIT INDUSTRIES (ADAFRUIT)
Артикул 1229209

Сопутствующие товары для Micro Lipo - USB LiIon/LiPoly charger - v1

  • Изображение  USB/DC Lithium Polymer battery charger 5-12V - 3.7/4.2v

    USB/DC Lithium Polymer battery charger 5-12V - 3.7/4.2v
    ADAFRUIT

    USB/DC Lithium Polymer battery charger 5-12V - 3.7/4.2v Charge your single-cell lithium ion/polymer battery any which way you like with this board. Have a USB connection? No problem, just plug into the miniUSB connector.…

  • Изображение  Solar Charger Shield V2

    Solar Charger Shield V2
    SEEEDUIN

    Склад (1-2 дн)

    Шидл солнечного зарядного устройства для Arduino-платформ. Вы можете использовать различные солнечные батареи с напряжением 2,7-4,2 В для преобразования в 5 В.…

Изображения Micro Lipo - USB LiIon/LiPoly charger - v1

Micro Lipo - USB LiIon/LiPoly charger - v1, ADAFRUIT INDUSTRIES Micro Lipo - USB LiIon/LiPoly charger - v1, ADAFRUIT INDUSTRIES
НА СКЛАДЕ
Цена (включая НДС)
382,00 руб
Наличие на складе
Нет на складе,
сообщить о поступлении
Уведомить о поступлении
поиск по складам

Заметили ошибку в работе сайта?
Скажите нам об этом