Терраэлектроника

5V Step-Up/Step-Down Voltage Regulator S7V7F5, Pololu Robotics and Electronics

Pololu 5V Step-Up/Step-Down Voltage Regulator S7V7F5 The S7V7F5 switching step-up/step-down regulator efficiently produces 5 V from input voltages between 2.7 V and 11.8 V. Its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below 5 V. The very compact (0.35 ? 0.475) module has a typical efficiency of over 90% and can supply up to 1 A when stepping down and about 500 mA when stepping up. Overview The Pololu step-up/step-down voltage regulator S7V7F5 is a switching regulator (also called a switched-mode power supply (SMPS) or DC-to-DC converter) that uses a buck-boost topology. It takes an input voltage from 2.7 V to 11.8 V and increases or decreases the voltage to a fixed 5 V output with a typical efficiency of over 90%. This flexibility in input voltage is especially well-suited for battery-powered applications in which the battery voltage begins above 5 V and drops below as the battery discharges. Without the typical restriction on the battery voltage staying above the required voltage throughout its life, new battery packs and form factors can be considered. For instance, a 4-cell battery holder, which might have a 6 V output with fresh alkalines but a 4.8 V nominal voltage with NiMH cells and a 4.0 V output with partially discharged cells, can now be used for a 5 V circuit. In another typical scenario, a disposable 9V battery powering a 5 V circuit can be discharged to under 3 V instead of cutting out at 6 V, as with typical linear or step-down regulators. In typical applications, this regulator can deliver about 1 A continuous when the input voltage is higher than 5 V (stepping down) and 500 mA continuous when the input is lower than 5 V (stepping up); please see the graphs at the bottom of this page for a more detailed characterization. The regulator has short-circuit protection, and thermal shutdown prevents damage from overheating; the board does not have reverse-voltage protection. For an adjustable-output version of this regulator, consider our step-up/step-down voltage regulator S7V8A. Features - input voltage: 2.7 V to 11.8 V - fixed 5V output with +5/-3% accuracy - typical continuous output current: 1 A when stepping down; 500 mA when stepping up (Actual continuous output current depends on input voltage. See Typical Efficiency and Output Current section below for details.) - power-saving feature maintains high efficiency at low currents (quiescent current is less than 0.1 mA) - integrated over-temperature and short-circuit protection - small size: 9 ? 12 ? 3 mm


5V Step-Up/Step-Down Voltage Regulator S7V7F5, Pololu Robotics and Electronics

Параметры 5V Step-Up/Step-Down Voltage Regulator S7V7F5

Наименование5V Step-Up/Step-Down Voltage Regulator S7V7F5
ПроизводительPololu Robotics and Electronics (POLOLU)
Артикул1139193

Средства разработки для 5V Step-Up/Step-Down Voltage Regulator S7V7F5

  • Изображение  Uno R3

    Uno R3
    HKSHAN

    Склад (1-2 дн)

    Arduino Uno - R3 Версия R3 отличается от предыдущих версий конвертером USB-UART на базе ATmega16U2 вместо ранее используемых чипов 8U2 и FTDI. В качестве загрузчика устанавливается OptiBoot 4.4.…

Изображения 5V Step-Up/Step-Down Voltage Regulator S7V7F5

5V Step-Up/Step-Down Voltage Regulator S7V7F5, Pololu Robotics and Electronics 5V Step-Up/Step-Down Voltage Regulator S7V7F5, Pololu Robotics and Electronics 5V Step-Up/Step-Down Voltage Regulator S7V7F5, Pololu Robotics and Electronics
НА СКЛАДЕ
Цена (включая НДС)
293,00 руб
от 5 шт. 279,50 руб
от 10 шт. 266,00 руб
Наличие на складе
Нет на складе,
сообщить о поступлении
Уведомить о поступлении
поиск по складам

Заметили ошибку в работе сайта?
Скажите нам об этом