FRDM-KL05Z Evaluation Board, MKL05Z32, Embest Info&Tech Co.,Ltd.

FRDM-KL05Z Evaluation Board – бюджетная макетная плата на базе ARM Cortex-M0+ микроконтроллера MKL05Z32VFM4 семейства Kinetis L от Freescale. Микроконтроллер имеет тактовую частоту 48 МГц, 32 кБ Flash, 4 кБ SRAM и богатый набор интерфейсов. Плата FRDM-KL05Z Eval board станет идеальным решением для создания прототипов устройств на базе микроконтроллеров семейства Kinetis L с ядром Cortex-M0+.

Плата FRDM-KL05Z Evaluation Board может быть использована для оценки серии KL04 и KL05. Форм-фактор платы совместим с Arduino R3, что позволяет использовать вместе с FRDM-KL05Z Evaluation Board платы расширения Arduino.

Бюджетная плата FRDM-KL05Z Evaluation Board для оценки микроконтроллеров Kinetis L от Freescale

FRDM-KL05Z Eval board включает в себя открытый стандарт встраиваемого последовательного и отладочного адаптера, известного как OpenSDA. Стандарт предусматривает его использование для последовательного соединения, программирования flash-памяти и отладки собственных приложений.

Отличительные особенности:

  • микроконтроллер MKL05Z32VFM4;
  • емкостной сенсорный слайдер;
  • акселерометр MMA8451Q;
  • RGB светодиод;
  • питание платы от USB, батарейки или внешнего источники;
  • порты GPIO вынесены на внешние разъемы;
  • форм-фактор Arduino R3;
  • отладочный интерфейс OpenSDA.


  1. макетная плата FRDM-KL05Z Evaluation Board.

FRDM-KL05Z Evaluation Board, Embest Info&Tech Co.,Ltd.

Параметры FRDM-KL05Z Evaluation Board

НаименованиеFRDM-KL05Z Evaluation Board
ПроизводительEmbest Info&Tech Co.,Ltd. (EMBEST)
Производитель МК
Тип устройства

Документация для FRDM-KL05Z Evaluation Board

Сопутствующие товары для FRDM-KL05Z Evaluation Board

  • Изображение  Graphic LCD4884 Shield For Arduino

    Graphic LCD4884 Shield For Arduino

    Склад (1-2 дн)

    ARDUINO-совместимая дочерняя плата с установленным графическим ЖКИ 84х48 и джойстиком.

  • Изображение  Pololu Dual MC33926 Motor Driver Shield for Arduino

    Pololu Dual MC33926 Motor Driver Shield for Arduino

    Склад (1-2 дн)

    Pololu Dual MC33926 Motor Driver Shield for Arduino This motor driver shield and its corresponding Arduino library make it easy to control two bidirectional, brushed DC motors with an Arduino or Arduino clone. The board features a pair of Freescale MC33926 motor drivers, which operate from 5 to 28 V and can deliver a continuous 3 A per channel, and includes current sense circuitry, protection resistors, a FET for reverse battery protection, and logic gates to reduce the required number of I/O pins. It ships fully populated with its SMD components, including the two MC33926 ICs, as shown in the picture to the right; stackable Arduino headers and terminal blocks for connecting motors and motor power are included but are not soldered in (see the Included Hardware section below). This versatile motor driver is intended for a wide range of users, from beginners who just want a plug-and-play motor control solution for their Arduinos (and are okay with a little soldering) to more advanced users who want a dual MC33926 carrier that requires fewer I/O pins to control. The Arduino pin mappings can all be customized if the defaults are not convenient, and the simplified MC33926 control lines are broken out along the left side of the board, providing a convenient interface point for other microcontroller boards (see the right connection diagram below). This versatility, along with an option to power the Arduino directly from the shield, sets this board apart from similar competing motor shields. Features - Wide operating voltage range: 5 - 28 V 1 - Output current: 3 A continuous (5 A peak 2) per motor - Inputs compatible with both 5 V and 3.3 V systems - PWM operation up to 20 kHz, which is ultrasonic and allows for quieter motor operation - Current sense voltage output proportional to motor current (approx. 525 mV/A) - Motor indicator LEDs show what the outputs are doing even when no motor is connected - Can be used with an Arduino or Arduino clone (through shield headers) or other microcontroller boards (through 0.1 header along the left side) - When used as a shield, the motor power supply can optionally be used to power the Arduino base as well - Arduino pin mappings can be customized if the default mappings are not convenient - Arduino library makes it easy to get started using this board as a motor driver shield - Detailed user's guide - Reverse-voltage protection on motor supply 3 - Robust drivers: - Transient operation up to 40 V - Over-current limiting via internal PWM - Over-temperature shutdown and hysteresis - Under-voltage shutdown - Output short-to-ground and short-to-Vcc protection 1 The board supports transient (< 500 ms) operation up to 40V. Operation from 5-8 V reduces maximum continuous output current (driver performance is derated in this range). 2 Internal peak-current limiting gracefully reduces the output power at load currents above 6.5 A ± 1.5 A. See the MC33926 datasheet (1MB pdf) for more information. 3 There is no reverse-voltage protection on the logic supply. Included Hardware This motor driver board ships with all of the surface-mount parts populated. However, soldering is required for assembly of the included through-hole parts. The following through-hole parts are included: one extended/stackable 1?10 female header (for Arduino shields) two extended/stackable 1?8 female headers (for Arduino shields) two extended/stackable 1?6 female headers (for Arduino shields) three 2-pin, 5 mm terminal blocks (for board power and motor outputs) 25-pin 0.1 straight breakaway male header A 0.1 shorting block (for optionally supplying shield power to Arduino) is also included. You can solder the terminal blocks to the six large through-holes to make your motor and motor power connections, or you can break off a 12?1 section of the 0.1 header strip and solder it into the smaller through-holes that border these larger holes. You can also solder wires directly to the board. When not using this board as an Arduino shield, you can solder the 0.1 headers to the logic connections along the left side of the board to enable use with custom cables or solderless breadboards, or you can solder wires directly to the board for more compact installations. Note that motor and motor power connections should not be made through a breadboard. Real-World Power Dissipation Considerations Each MC33926 motor driver IC has a maximum continuous current rating of 5 A. However, the actual current it can deliver depends on how well you can keep it cool. The shield's printed circuit board is designed to draw heat out of the motor driver chips, but performance can be improved by adding heat sinks. Unlike other H-Bridges, the MC33926 has a feature that allows it to gracefully reduce current as the current exceeds 5 A or as the chip temperature approaches its limit. This means that if you push the chip close to its limit, you will see less power to the motor, but it might allow you to avoid a complete shutdown. We tested the shield at room temperature with no forced air flow or heat sinks. In our tests, the shield was able to deliver 5 A to both channels simultaneously for 10 s before the thermal protection started reducing the current. The shield delivered 4 A on both channels for 37 s, and at 3 A it was able to operate continuously for over 10 minutes without triggering current limiting or thermal protection. Our tests were conducted at 100% duty cycle; PWMing the motor will introduce additional heating proportional to the frequency. This product can get hot enough to burn you long before the chip overheats. Take care when handling this product and other components connected to it. The mounting hole is intended for use with #4 screws (not included). An Arduino is not included.

  • Изображение  Prototyping Shield For Arduino

    Prototyping Shield For Arduino

    Склад (1-2 дн)

    DFRobot Prototyping Shield For Arduino DFR0019 Это модуль с открытым исходным кодом для Arduino NG / Diecimila / Duemilanove. Имеет массу интересных функций, чтобы легко сделать проекты на Arduino. Поставляется полностью собранным. Особенности - Кнопка сброса наверху - ICSP - Множество GND и +5 V - DIP-прототипы и площадь позволяет легко добавить больше фишек - Дополнительные кнопки 6мм - Arduino NG (совместимый) - Arduino Diecimila (совместимый) - Arduino (совместимый)

  • Изображение  Relay Shield for Arduino V2.1

    Relay Shield for Arduino V2.1

    Склад (1-2 дн)

    DFRobot DFRobot Relay Shield for Arduino DFR0144 Этот модуль способен управлять 4-мя реле. Максимальная мощность переключения тока 90 Вт 360VA и может быть постоянной или переменной. Управляется под прямым контролем Arduino / DFRduino с помощью цифрового ввода-вывода с внешним 9v питанием. Также, управляется с помощью беспроводного XBee / Bluetooth / WPM. Это идеальное решение для домашней автоматизации и робототехнических проектов. - 4 Реле - Контакты 3A AC 120V / DC 24V - Максимальное напряжение переключения 240 В AC / DC 60V - Максимальный коммутируемый ток 5A - Максимальный импульсный источник переменного тока 360VA / DC 90W - Электрический ресурс (мин.) 100 000 операций - Механический ресурс (мин.) 10 миллионов операций - Стандарты безопасности (реле) UL CUL TUV CQC - Катушка напряжения 9VDC - Вес 165г - Рабочая температура -30с до +85с - Рабочая температура 40% - 85%

  • Изображение  Smoke Detector Shield for Arduino

    Smoke Detector Shield for Arduino

    Склад (1-2 дн)

    Smoke Detector Shield for Arduino MQ2 flammable gas and smoke sensor detects the concentrations of combustible gas in the air and ouputs its reading as an analog voltage. The sensor can measure concentrations of flammable gas of 300 to 10,000 ppm.The sensor can operate at temperatures from -20 to 50°C and consumes less than 150 mA at 5 V. Connecting five volts across the heating (H) pins keeps the sensor hot enough to function correctly. Connecting five volts at either the A or B pins causes the sensor to emit an analog voltage on the other pins. A resistive load between the output pins and ground sets the sensitivity of the detector. Please note that the picture in the datasheet for the top configuration is wrong. Both configurations have the same pinout consistent with the bottom configuration.The resistive load should be calibrated for your particular application using the equations in the datasheet, but a good starting value for the resistor is 20 k?.

  • Изображение  Xbee Shield For Arduino

    Xbee Shield For Arduino

    Склад (1-2 дн)

    DFROBOT - Xbee Shield For Arduino (SKU:DFR0015) Плата расширения, с помощью которой вы сможете организовать беспроводную связь между модулями Arduino/Freeduino по технологии Zigbee. Плата продается без радио-модуля. Можно использовать например совместно со съемным радио-модулем XBee-PRO 802.15.4 OEM RF, который обеспечивает беспроводную связь на расстоянии до 100 м и скорость до 250 kbps.

Цена (включая НДС)
724,00 руб
Наличие на складах
5 шт. (склад, 1-2 дн.)
Нужно больше?

Заметили ошибку в работе сайта?
Скажите нам об этом