Ваш город: Москва
+7 (495) 221-78-04
+7 (812) 327-327-1

Teensy 3.2, SparkFun Electronics

Teensy 3.1 Микроконтроллер Teensy 3.1 на ARM Cortex-M4 72 МГц (32bit) The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.1 brings a 32 bit ARM Cortex microprocessor into the mix so you can do some serious number crunching. The Teensy 3.1 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy! The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I2S digital audio interface! There are also 4 separate interval timers plus a delay timer! Oh yeah, and all pins have interrupt capability. Also, it can provide system voltage of 3.3V to other devices at up to 100mA. All of this functionality is jammed into a 1.4 x 0.7 inch board with all headers on a 0.1" grid so you can slap in on a breadboard and get to work! On top of everything else the Teensy has been gifted with more RAM (64K, thats 4x more than the Teensy 3.0) and 256kb of flash memory! The Teensy 3.1 now has 5V tolerance on its digital inputs however all analog-only pins are still 3.3V only. Note: This does not come with a USB cable, please check below for an appropriate one. Dimensions: 1.4 x 0.7" (~35 x 18 mm) Features: 32 bit ARM Cortex-M4 72 MHz CPU (M4 = DSP extensions) 256K Flash Memory, 64K RAM, 2K EEPROM 21 High Resolution Analog Inputs (13 bits usable, 16 bit hardware) 34 Digital I/O Pins (5V tolerance on Digital Inputs) 12 PWM outputs 7 Timers for intervals/delays, separate from PWM USB with dedicated DMA memory transfers 3 UARTs (serial ports) SPI, I2C, I2S,CAN Bus, IR modulator I2S (for high quality audio interface) Real Time Clock (with user-added 32.768 crystal and battery) 4 general purpose DMA channels (separate from USB) Touch Sensor Inputs

Teensy 3.2, SparkFun Electronics

Параметры Teensy 3.2

Наименование Teensy 3.2
Производитель SparkFun Electronics (SPARKFUN)
Артикул 1047295

Сопутствующие товары для Teensy 3.2

  • Изображение  Pin headers experimental pack

    Pin headers experimental pack

    SEED TECHNOLOGY INC (SEEEDUINO) Pin headers experimental pack Model: STR131B2P Набор межплатных разъемов для ARDUINO проектов. В комплекте - 41 штука.

  • Изображение  USB cable - A to Mini B Charging and Micro B Data

    USB cable - A to Mini B Charging and Micro B Data

    USB cable - 8" A to Mini B Charging and Micro B Data Mini or Micro? Mini or Micro??? Mini AND Micro! This is a handy USB cable, it's compact so you can toss it into your toolkit, and has both Mini-B and Micro-B connector.…

  • Изображение  A-Star 32U4 Micro

    A-Star 32U4 Micro

    Склад (1-2 дн)

    A-Star 32U4 Micro - крошечный программируемый модуль на микроконтроллере ATmega32U4 компании Atmel. Он представляет из себя интерфейс Micro-USB и 15 контактов цифрового ввода / вывода (из которых 7 могут быть использованы как выходы ШИМ и 8 как аналоговые входы) и всё это на плате размером 15х26 мм и предустановленным Arduino-совместимым загрузчиком.…

Изображения Teensy 3.2

Teensy 3.2, SparkFun Electronics Teensy 3.2, SparkFun Electronics Teensy 3.2, SparkFun Electronics Teensy 3.2, SparkFun Electronics
Цена (включая НДС)
1770,00 руб
Наличие на складе
18 шт.
поиск по складам

Заметили ошибку в работе сайта?
Скажите нам об этом