MP3 Shield for Arduino w/3W Stereo Amp, ADAFRUIT INDUSTRIES

Adafruit "Music Maker" MP3 Shield for Arduino w/3W Stereo Amp MP3 модуль со строенным стереоусилителем для ARDUINO Bend all audio files to your will with the Adafruit Music Maker shield for Arduino! This powerful shield features the VS1053, an encoding/decoding (codec) chip that can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can also be used to record audio in both PCM (WAV) and compressed Ogg Vorbis. You can do all sorts of stuff with the audio as well such as adjusting bass, treble, and volume digitally. All this functionality is implemented in a light-weight SPI interface so that any Arduino can play audio from an SD card. There's also a special MIDI mode that you can boot the chip into that will read 'classic' 31250Kbaud MIDI data from an Arduino pin and act like a synth/drum machine - there are dozens of built-in drum and sample effects! But the chip is a pain to solder, and needs a lot of extras. That's why we spun up the best shield, perfect for use with any Arduino Uno, Leonardo or Mega. This version of the shield includes an onboard 3W/channel stereo audio amplifier that can drive 4 or 8 ohm speakers. It's the same amplifier as in our TS2012 breakout, a great class D amplifier that sounds good and is power-conscious for portable/battery usage. Volume control is handled by the VS1053 chip. We also have a version without an amplifier, when only line/headphone out is required. We believe this is the best MP3 playing shield you can get, and at a great price too. Here are some specs: Features the VS1053B codec chip - decodes Ogg Vorbis, MP3/MP2/MP1, MP4, AAC, WMA, FLAC, WAV/PCM, MIDI. Encodes Ogg or WAV/PCM Stereo audio out with proper audio filter caps and ground reference so it can be safely connected directly to headphones, a stereo system or other powered speakers 7 extra GPIO's that can be written or read through the Arduino Library for reading buttons or lighting LEDs MicroSD card socket, for any FAT16/FAT32 formatted SD card from 64Mb or greater. Full 3.3/5V level shifting for SD and MP3 chipsets Works with Arduino Uno, Mega, or Leonardo Built in MIDI synth/drum machine with dozens of instruments Plenty of optional breakouts for pins like the card-detect and microphone input Each order comes with one fully-assembled and tested shield, 2 2-pin terminal blocks, a stick of 0.1" male header and 2x3 female header for the ICSP connection. Some light soldering is required to attach the through-hole headers to the PCB for plugging into the Arduino as well as the terminal blocks for the speakers. Speakers, $1 headphones, SD card and Arduino not included!

MP3 Shield for Arduino w/3W Stereo Amp, ADAFRUIT INDUSTRIES

Параметры MP3 Shield for Arduino w/3W Stereo Amp

НаименованиеMP3 Shield for Arduino w/3W Stereo Amp

Аналоги MP3 Shield for Arduino w/3W Stereo Amp, доступные на складе

DFPlayer - A Mini MP3 Player, (DFROBOT)

Сопутствующие товары для MP3 Shield for Arduino w/3W Stereo Amp

  • Изображение  Mega 2560 R3

    Mega 2560 R3

    Склад (1-2 дн)

    Arduino Mega 2560 (не оригинал) Это плата управления с микроконтроллером ATmega2560. На этой плате есть 54 канала дискретного ввода/вывода (14 каналов…

  • Изображение  Nano V3.0

    Nano V3.0

    Склад (1-2 дн)

    Arduino Nano V3.0 (не оригинал) - это маленькое, готовое к использованию и хорошо работающее с макетными платами устройство, разработанное на микроконтроллере ATmega328.…

  • Изображение  Uno R3

    Uno R3

    Склад (1-2 дн)

    Arduino Uno - R3 Версия R3 отличается от предыдущих версий конвертером USB-UART на базе ATmega16U2 вместо ранее используемых чипов 8U2 и FTDI. В качестве загрузчика устанавливается OptiBoot 4.4.…

  • Изображение  Uno R3 [Atmega 328P-AU+CH340G]

    Uno R3 [Atmega 328P-AU+CH340G]

    Склад (1-2 дн)

    Arduino Uno R3 [Atmega 328P-AU+CH340G] по своим характеристикам не чем не отличается от оригинала Arduino UNO R3. Для максимальной ценовой доступности…

Изображения MP3 Shield for Arduino w/3W Stereo Amp

MP3 Shield for Arduino w/3W Stereo Amp, ADAFRUIT INDUSTRIES MP3 Shield for Arduino w/3W Stereo Amp, ADAFRUIT INDUSTRIES
Цена (включая НДС)
2557,50 руб
Наличие на складах
Нет на складе,
сообщить о поступлении
Уведомить о поступлении

Заметили ошибку в работе сайта?
Скажите нам об этом