Отладочные платы для систем освещения (ADM00435 - DLPDLCR3010EVM-G2)

The MCP1643 Synchronous Boost LED Constant Current Regulator Evaluation Board is used to evaluate and demonstrate Microchip Technology’s MCP1643 device. This board demonstrates the MCP1643 in a boost converter application supplied by one AA battery,

Оценочная плата для микросхемы LED драйвера MСP1662 от Microchip.

Демонстрационная плата на основе микросхемы LED драйвера MCP1643.

Оценочная плата LED драйвера MCP1664

The HV9805 120VAC Off-Line LED Driver Evaluation Board is used to evaluate and demonstrate Microchip Technology Inc.'s HV9805 device in the following topology: ?215-265V output Boost Converter application followed by a LED-side linear current regulator, s

The HV9805 230VACSEPIC Evaluation Board is used to evaluate and demonstrate Microchip Technology Inc.'s HV9805 device in the following topology: The HV9805 230VAC SEPIC Evaluation Board is suited for driving a 125V/100 mA LED load from a 230VAC source. Th

The HV9805 230VAC Off-Line LED Driver Evaluation Board is used to evaluate and demonstrate Microchip Technology Inc.'s HV9805 device in the following topology: ?420-430V output Boost Converter application followed by a LED-side linear current regulator, s

The CL88020 120VAC office LED Driver Evaluation Board is a complete solution consisting of an LED Driver (ADM00766) and an LED Load Board (ADM00767) powered directly from the 120VAC line and based on Microchip Technology's CL88020 Sequential Linear Driver

Оценочный комплект для микросхемы светодиодного драйвера CL88030 от Microchip

The MIC3223 is a constant-current boost switching controller specifically designed to power a string of high-power LEDs. The MIC3223 has an input voltage range from 4.5V to 20V and is ideal for a variety of applications. The MIC3223 evaluation board is de

EVAL BOARD, BUCK, HB LED DRIVER, PWM

The CL88031 230VAC LED Driver Evaluation Board is a complete 6 tap solution consisting of an LED Driver Board (ADM00963) and an LED Load Board (ADM00965) powered directly from the 230VAC line and based on Microchip Technology's CL88031 Sequential Linear D

The MCP16301 High-Voltage Single-Inductor Cuk LED Driver Demo Board is designed to operate from a 6V to 18V input and regulate the output current to 300 mA. Test points for input power are provided to demonstrate the capability of the demo board over the

Bluetooth Low Energy Light Development Kit

CY8CLED04, POWERPSOC, LED, EVAL KIT

Dual LED Ballast Shield Evaluation Board

DEMO BOARD, LT3597 STEP DOWN LED DRIVER

DEMO BOARD, LT3799-1 FLYBACK LED DRIVER

DEMO BOARD, LT3955 0.3A/67V LED DRIVER

DEMO BOARD, LT3954 0.65A/32V LED DRIVER

DEMO BOARD, LT3909 BOOST LED DRIVER

DEMO BOARD, LT3744 SYNC BUCK LED DRIVER

DEMO BOARD, LTC3200-5 CHARGE PUMP LED DR

DEMO BOARD, LT1768 DUAL CCFL POWER SUPPL

DEMO BOARD, LTC3201 CHARGE PUMP LED DRIV

DEMO BOARD, LTC3215 STEP UP LED DRIVER

DEMO BOARD, LT1937 STEP UP LED DRIVER

DEMO BOARD, LTC1697 1W CCFL REGULATOR

DEMO BOARD, LT1373 CCFL POWER SUPPLY

DEMO BOARD, LTC3205 BUCK/BOOST LED CTRL

DEMO BOARD, LT1942 STEP UP LED DRIVER

DEMO BOARD, LTC3206 BUCK/BOOST LED CTRL

DEMO BOARD, LTC3441/LTC2050 LED DRIVER

DEMO BOARD, LTC3216 CHARGE PUMP LED DRIV

DEMO BOARD, LT3479 STEP UP LED DRIVER

DEMO BOARD, LTC3215 CHARGE PUMP LED DRIV

DEMO BOARD, LTC3215 CHARGE PUMP LED DRIV

Набор для использования совместно с SensorTag для создания решений в области освещения