Модемы гражданской сотовой связи (GSM/GPRS) - Решения

Производители
Стандарт передачи все
Напряжение питания мин все
Напряжение питания макс все
Минимальная рабочая температура все
Максимальная рабочая температура все
Длина все
Ширина все
Высота все
Интерфейс все
Принять Сбросить
Позиций:
Описание:
The MAX2009/MAX2010 evaluation kits (EV kits) simplify the evaluation of the MAX2009 and MAX2010. These kits are fully assembled and tested at the factory. Standard 50Ω SMA connectors are included for all inputs and outputs to facilitate evaluation on the test bench.

Each EV kit provides a list of equipment required to evaluate the device, a test procedure, a circuit schematic, a bill of materials (BOM), and artwork for each layer of the PC board.
Возможности:

  • Fully Assembled and Tested
  • Frequency Range
    • 1200MHz to 2500MHz (MAX2009)
    • 500MHz to 1100MHz (MAX2010)
  • Up to 12dB ACPR Improvement*
  • Independent Adjustable Gain and Phase Expansion
  • Low Power Consumption

Документация:
  • Даташит
Описание:
The MAX2009/MAX2010 evaluation kits (EV kits) simplify the evaluation of the MAX2009 and MAX2010. These kits are fully assembled and tested at the factory. Standard 50Ω SMA connectors are included for all inputs and outputs to facilitate evaluation on the test bench.

Each EV kit provides a list of equipment required to evaluate the device, a test procedure, a circuit schematic, a bill of materials (BOM), and artwork for each layer of the PC board.
Возможности:

  • Fully Assembled and Tested
  • Frequency Range
    • 1200MHz to 2500MHz (MAX2009)
    • 500MHz to 1100MHz (MAX2010)
  • Up to 12dB ACPR Improvement*
  • Independent Adjustable Gain and Phase Expansion
  • Low Power Consumption

Документация:
  • Даташит
Описание:
The MAX2015 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that allows for easy evaluation of the MAX2015 RF power detector/controller. The MAX2015 EV kit includes connections to operate the device as a detector or as a controller. The RF input utilizes a 50Ω SMA connector for convenient connection to test equipment.
Возможности:

  • Complete RF Power Detector/Controller
  • 50MHz to 2.7GHz Frequency Range
  • 2.7V to 5.25V Single-Supply Operation
  • 50Ω SMA Connector on RF Input
  • Fully Assembled and Tested Surface-Mount Board

Документация:
  • Даташит
Описание:
The MAX2264/MAX2265/MAX2266 evaluation kits (EV kits) simplify evaluation of the MAX2264/MAX2265/MAX2266 power amplifiers (PAs), which are designed for operation in IS-98-based CDMA, IS-136-based TDMA, and PDC cellular phones operating in the 900MHz range. The kits enable testing of the devices' RF performance and require no additional support circuitry. The EV kits' signal inputs and outputs use SMA connectors to facilitate the connection of RF test equipment.

Each kit is assembled with either the MAX2264, MAX2265 or MAX2266 and incorporates input and output matching components optimized for the 824MHz to 849MHz RF frequency band. These EV kits are capable of operating at RF frequencies from 750MHz to 1000MHz with the appropriate matching components.
Возможности:

  • Easy Evaluation of MAX2264/MAX2265/MAX2266
  • +2.7V to +5V Single-Supply Operation
  • RF Input/Output Matched for 824MHz to 849MHz Operation
  • All Matching Components Included

Документация:
  • Даташит
  • Топология платы
Описание:
The MAX2320, MAX2321, MAX2322, MAX2324, MAX2326, MAX2327 evaluation kits (EV kits) simplify evaluation of these high-linearity, silicon germanium (SiGe), dual-band LNAs/mixers. They enable testing of the devices' RF performance and require no additional support circuitry. The signal inputs and outputs use SMA connectors to simplify the connection of RF test equipment.

The MAX2320/21/22/24/26/27 EV kits are assembled with an associated IC and incorporate input and output matching components optimized for the 869MHz to 894MHz cellular frequency band, 1930MHz to 1990MHz PCS frequency band, 210MHz digital mixer output frequency, and 110MHz FM mixer output frequency. All matching components may be changed to work at other frequencies within the bands specified in the MAX2320/21/22/24/26/27 data sheet.
Возможности:

  • 50Ω SMA Ports for Easy Testing
  • +2.7V to +3.6V Single-Supply Operation
  • All Critical Matching Components Included
  • Fully Assembled and Tested

Документация:
  • Даташит
  • Топология платы
Описание:

These evaluation kits (EV kits) simplify testing of the MAX250_. The EV kits provide 50Ω SMA connectors to all RF ports and BNC connectors to the baseband I/Q inputs. The kits enable testing of the devices' RF performance and all modes of operation.

Each kit is assembled with the corresponding IC and incorporates all matching components.

Документация:
  • Даташит
  • Топология платы
Описание:
The MAX9930 evaluation kit (EV kit) is a fully assembled and tested surface-mount printed-circuit board (PCB) that evaluates the MAX9930 RF-detecting controller. The MAX9930 EV kit includes on-board shutdown control, as well as quasi-measurement mode circuitry to provide an easy method to evaluate the MAX9930. The RF input utilizes a 50Ω SMA connector for convenient connection to test equipment.

The MAX9930 EV kit comes with the MAX9930EUA+ installed, but can also be used to evaluate the MAX9931/MAX9932 RF-detecting controllers and the MAX9933 RF detector. To evaluate the MAX9931, MAX9932, or MAX9933, request a MAX9931EUA+, a MAX9932EUA+, or a MAX9933EUA+ free sample with the MAX9930 EV kit.
Возможности:

  • 2.7V to 5.25V Single-Supply Operation
  • 50Ω SMA Connector on RF Input
  • On-Board Quasi-Measurement Mode Circuitry
  • On-Board Shutdown Control
  • Fully Assembled and Tested Surface-Mount PCB

Документация:
  • Даташит
  • Топология платы
Описание:
The MAX9981 evaluation kit (EV kit) simplifies the evaluation of the MAX9981 825MHz to 915MHz dual high-linearity active down-converter mixer. It is fully assembled and tested at the factory. Standard 50Ω SMA connectors are included for the inputs and outputs to allow quick and easy evaluation on the test bench.

This document provides a list of equipment required to evaluate the device, a straightforward test procedure to verify functionality, a description of the EV kit circuit, the circuit schematic, a bill of materials (BOM) and artwork for each layer of the PC board.

Contact MaximDirect sales at 888-629-4642 to check on pricing and availability for these kits.
Возможности:

  • Fully Assembled and Tested
  • +27.3dBm Input IP3
  • +13.6dBm Input 1dB Compression Point
  • 825MHz to 915MHz RF Frequency
  • 725MHz to 1085MHz LO Frequency
  • 70MHz to 170MHz IF Frequency
  • 2.1dB Conversion Gain
  • 10.8dB Noise Figure
  • 42dB Channel-to-Channel Isolation
  • -5dBm to +5dBm LO Drive
  • Built-In LO Switch with 52dB LO1-to-LO2 Isolation

Документация:
  • Даташит
  • Топология платы
Описание:
The MAX9982 evaluation kit (EV kit) simplifies the evaluation of the MAX9982 825MHz to 915MHz high-linearity active down-converter mixer. It is fully assembled and tested at the factory. Standard 50Ω SMA connectors are included on the EV kit for the inputs and outputs to allow quick and easy evaluation on the test bench.

This document provides a list of equipment required to evaluate the device, a straightforward test procedure to verify functionality, a description of the EV kit circuit, the circuit schematic, a bill of materials (BOM) for the kit, and artwork for each layer of the PC board.

Contact MaximDirect sales at 888-629-4642 to check on pricing and availability for these kits.
Возможности:

  • Fully Assembled and Tested
  • +26.8dBm Input IP3
  • +13dBm Input 1dB Compression Point
  • 825MHz to 915MHz RF Frequency
  • 725MHz to 1085MHz LO Frequency
  • 70MHz to 170MHz IF Frequency
  • 2dB Conversion Gain
  • 12dB Noise Figure
  • -5dBm to +5dBm LO Drive
  • Built-In LO Switch with 43dB LO1-to-LO2 Isolation

Документация:
  • Даташит
  • Топология платы
Описание:
The MAX9984 evaluation kit (EV kit) simplifies the evaluation of the MAX9984 GSM, WCDMA, and WiMAX base-station downconversion mixer. It is fully assembled and tested at the factory. Standard 50Ω SMA connectors are included on the EV kit's input and output ports to allow quick and easy evaluation on the test bench.

This document provides a list of test equipment required to evaluate the device, a straightforward test procedure to verify functionality, a description of the EV kit circuit, the circuit schematic, a bill of materials (BOM) for the kit, and artwork for each layer of the PC board. Contact MaximDirect sales at 888-629-4642 for pricing and availability on these kits.
Возможности:

  • Fully Assembled and Tested
  • 400MHz to 1000MHz RF Frequency†
  • 325MHz to 850MHz LO Frequency†
  • 50MHz to 250MHz IF Frequency
  • 8.1dB Conversion Gain
  • 25dBm IIP3
  • 9.3dB Noise Figure
  • Integrated LO Buffer
  • Switch-Selectable (SPDT), Two LO Inputs
  • -3dBm to +3dBm LO Drive
  • 54dB LO1 to LO2 Isolation
  • 50Ω SMA Connectors on Input and Output Ports
  • 4:1 Balun for Single-Ended IF Output

Документация:
  • Даташит
  • Топология платы
Описание:
The MAX9985 evaluation kit (EV kit) simplifies the evaluation of the MAX9985 dual-channel downconversion mixer, ideal for GSM 850/950, 2G/2.5G EDGE, WCDMA, cdma2000®, and iDEN® base-station applications. It is fully assembled and factory tested. Standard 50Ω SMA connectors are included on the EV kit for the input and output to allow for quick and easy evaluation on the test bench.

This document provides a component list for the EV kit, a list of equipment required to evaluate the device, a straightforward test procedure to verify functionality, a description of the EV kit circuit, the circuit schematic, and artwork for each layer of the printed-circuit board (PCB).
Возможности:

  • 700MHz to 1000MHz RF Frequency Range
  • 570MHz to 865MHz LO Frequency Range
  • 50MHz to 250MHz IF Frequency Range
  • 6dB Typical Conversion Gain
  • 10.5dB Typical Noise Figure
  • +28.5dBm Typical Input IP3
  • Integrated LO Buffers
  • Dual Channels Ideal for Diversity Receiver Applications
  • Low -3dBm to +3dBm LO Drive
  • Built-In SPDT LO Switch with 43dB LO1-to-LO2 Isolation
  • 47dB Typical Channel-to-Channel Isolation
  • 50Ω SMA Connectors on Input and Output Ports
  • 4:1 Balun for Single-Ended IF Outputs
  • Fully Assembled and Tested

Документация:
  • Даташит
  • Топология платы
Описание:
The MAX9986A evaluation kit (EV kit) simplifies the evaluation of the MAX9986A 815MHz to 1000MHz base-station downconversion mixer. It is fully assembled and tested at the factory. Standard 50Ω SMA connectors are included on the EV kit's input and output ports to allow quick and easy evaluation on the test bench.

This document provides a list of test equipment required to evaluate the device, a straightforward test procedure to verify functionality, a description of the EV kit circuit, the circuit schematic, a bill of materials (BOM) for the kit, and artwork for each layer of the PCB.

Документация:
  • Даташит
  • Топология платы
Описание:
The MAX9986 evaluation kit (EV kit) simplifies the evaluation of the MAX9986 815MHz to 995MHz base-station downconversion mixer. It is fully assembled and tested at the factory. Standard 50Ω SMA connectors are included on the EV kit's input and output ports to allow quick and easy evaluation on the test bench.

This document provides a list of test equipment required to evaluate the device, a straightforward test procedure to verify functionality, a description of the EV kit circuit, the circuit schematic, a bill of materials (BOM) for the kit, and artwork for each layer of the PC board.

Contact MaximDirect sales at 888-629-4642 for pricing and availability on these kits.

Документация:
  • Даташит
  • Топология платы
Описание:
The MAX9987/MAX9988 evaluation kits (EV kits) simplify the evaluation of the MAX9987/MAX9988 LO buffers/splitters. They are fully assembled and tested at the factory. Standard 50Ω SMA connectors are included on the EV kits for the input and all three outputs to allow quick and easy evaluation on the test bench.

This document provides a list of equipment required to evaluate the device, a straight-forward test procedure to verify functionality, a circuit schematic for the EV kits, a bill of materials (BOM) for the EV kits, and artwork for each layer of the PC boards.
Возможности:

  • Fully Assembled and Tested
  • Two-Way Power Splitting
  • +14dBm to +20dBm Output Power
  • ±1dB Output Power Variation
  • Isolated PLL Output (+3dBm)
  • Low Output Noise
    • -170dBc/Hz at +17dBm
  • 40dB Reverse Isolation
  • More than 30dB Output-to-Output Isolation
  • 160mA Supply Current at +17dBm
  • ESD Protection

Документация:
  • Даташит
  • Топология платы
Описание:
The MAX9989/MAX9990 evaluation kits (EV kits) simplify the evaluation of the MAX9989/MAX9990 LO buffers. They are fully assembled and tested at the factory. Standard 50Ω SMA connectors are included for the input and both outputs to allow quick and easy evaluation on the test bench.

This document provides a list of equipment required to evaluate the device, a straightforward test procedure to verify functionality, a circuit schematic, a bill of materials (BOM), and artwork for each layer of the PC boards.

Contact MaximDirect sales at 888-629-4642 to check on pricing and availability for these kits.
Возможности:

  • Fully Assembled and Tested EV Kits
  • +14dBm to +20dBm Adjustable Output Power
  • ±1dB Output Power Variation
  • Isolated PLL Output (+3dBm)
  • Low Output Noise: -170dBc/Hz at +17dBm
  • 40dB Reverse Isolation
  • Better than 35dB Main Driver Output to PLL Amp Output Isolation
  • 110mA Supply Current at +17dBm
  • ESD Protection

Документация:
  • Даташит
  • Топология платы
Описание:
The MAX9993 evaluation kit (EV kit) simplifies the evaluation of the MAX9993 UMTS, DCS, and PCS base-station downconversion mixer. It is fully assembled and tested at the factory. Standard 50Ω SMA connectors are included on the EV kit for the input and output to allow quick and easy evaluation on the test bench.

This document provides a list of equipment required to evaluate the device, a straight-forward test procedure to verify functionality, a description of the EV kit circuit, the circuit schematic, a bill of materials (BOM) for the kit, and artwork for each layer of the PC board.

Contact MaximDirect sales at 888-629-4642 to check on pricing and availibility for these kits.
Возможности:

  • Fully Assembled and Tested
  • +23.5dBm Input IP3
  • 1700MHz to 2200MHz RF Frequency
  • 1400MHz to 2000MHz LO Frequency
  • 40MHz to 350MHz IF Frequency
  • 8.5dB Conversion Gain
  • 9.5dB Noise Figure
  • Integrated LO Buffer
  • Switch-Selectable (SPDT), Two LO Inputs
  • Low 0dBm to +6dBm LO Drive
  • 40dB LO1 to LO2 Isolation

Документация:
  • Даташит
  • Топология платы
Описание:
The MAX9994 evaluation kit (EV kit) simplifies the evaluation of the MAX9994 UMTS, DCS, and PCS base-station downconversion mixer. It is fully assembled and tested at the factory. Standard 50Ω SMA connectors are included on the EV kit's input and output ports to allow quick and easy evaluation on the test bench.

This document provides a list of test equipment required to evaluate the device, a straightforward test procedure to verify functionality, a description of the EV kit circuit, the circuit schematic, a bill of materials (BOM) for the kit, and artwork for each layer of the PC board.

Contact MaximDirect sales at 888-629-4642 for pricing and availability on these kits.

Документация:
  • Даташит
  • Топология платы
Описание:
The MAX9995 evaluation kit (EV kit) simplifies the evaluation of the MAX9995 dual high-linearity mixer. It is fully assembled and tested at the factory. Standard 50Ω SMA connectors are included on the EV kit for the input and output to allow quick and easy evaluation on the test bench.

This document provides a list of equipment required to evaluate the device, a straightforward test procedure to verify functionality, a description of the EV kit circuit, the circuit schematic, a bill of materials (BOM) for the kit, and artwork for each layer of the PC board.

Contact MaximDirect sales at 888-629-4642 to check on pricing and availability for these kits.

Документация:
  • Даташит
  • Топология платы
Описание:
The MAX9996 evaluation kit (EV kit) simplifies the evaluation of the MAX9996 UMTS, DCS, and PCS base-station downconversion mixer. It is fully assembled and tested at the factory. Standard 50Ω SMA connectors are included on the EV kit's input and output ports to allow quick and easy evaluation on the test bench.

This document provides a list of test equipment required to evaluate the device, a straightforward test procedure to verify functionality, a description of the EV kit circuit, the circuit schematic, a bill of materials (BOM) for the kit, and artwork for each layer of the PC board.

Contact MaximDirect sales at 888-629-4642 for pricing and availability on these kits.

Документация:
  • Даташит
  • Топология платы
*Информация о ценах и сроках поставки носит информационный характер. Офертой является только выставленный счет.

Сравнение позиций

  • ()