Коммуникационные модули - Решения

Производители
Входной интерфейс все
Поддерживаемые устройства все
Напряжение питания Макс все
Выходной интерфейс все
Количество каналов все
Скорость передачи, бит/с все
Напряжение изоляции все
Корпус все
Особенности все
Применение все
Принять Сбросить
Позиций:
Описание:

The EVB-LAN7500 is full featured Evaluation Board EVB that utilizes the LAN7500 to provide a fully functional, bus-powered USB to Ethernet interface. The EVB-LAN7500 provides a fully integrated Ethernet port and USB port via the onboard RJ45 and USB Type A connectors. The onboard 4K EEPROM is used to load the EVB-LAN7500 USB configuration parameters and MAC address. LAN7500 software drivers are available for Windows XP, Windows Vista, Mac OSX, Linux, and Win CE. Additional manufacturing and diagnostic tools are available for debugging and external EEPROM configuration.

Users of the LAN8810/20(i) can use the EVB-LAN7500since evaluation platforms are not commercially availablefor these devices. Theseinterface to the MAC using a non-standard MAC connector (there is no standard connector for GMII/RGMII). The LAN7500 has integrated the LAN8810/20 corewhich allows the use of the EVB-LAN7500,for the purpose of evaluating the major LAN8810/20 features as well as the Ethernet parametrics.

Возможности:

    USB to Ethernet interface.

Документация:
  • Схемотехника
  • Тестирование
Описание:
The LAN9252-3PORT EVB is an 3-Port EtherCAT slave controller which addresses our customers’ requests for a standalone platform to develop an EtherCAT slave device with SPI/SQI as the PDI Interface . This board supports on-board PIC32MX or option for other SoC’s. It supports three network connections with two integrated PHY’s in RJ45 sockets and Option for interfacing any third party PHY using MII interface . For flexible network configuration Port 1 or Port 3 can be configured as upstream port. Integrated PHY’s optionally fit optical interfaces to accommodate fiber via an SFP module. This board is delivered in basic DIGIO mode and on power-up will appear to a host as an EtherCAT slave. The designer has freedom to develop further using PIC32MX

Возможности:

  • The EVB-LAN9252-3PORT supports two Integrated PHY's via on board RJ45 Connectors and one External PHY through MII interface
  • The EVB-LAN9252-3PORT supportsSPI and SQI based PDI configurations with onboard PIC32MX and option to plug-in third part SOC's like Beagle Bone Black
  • Option for onboard Fiber Interface via SFP module
  • The onboard EEPROM to configure the EtherCAT salve configuration

Документация:
  • Даташит
  • Схемотехника
  • BOM
  • Топология платы
  • Тестирование
Описание:
The LAN9252-4PORT EVB is an unique design by cascading two LAN9252 ESC in Back to Back configuration through the MII interface . It addresses our customers’ requests for a standalone platform to develop an EtherCAT slave device with SPI/SQI as the PDI Interface. This board supports on-board PIC32MX or option for other SoC’s. It supports four network connections with integrated PHY’s in RJ45 sockets. Integrated PHY’s optionally fit optical interfaces to accommodate fiber via an SFP module. This board is delivered in basic DIGIO mode and on power-up will appear to a host as an EtherCAT slave. The designer has freedom to develop further using PIC32MX.
Возможности:

    · The EVB-LAN9252-4PORT supports fourIntegrated PHY's via on board RJ45 Connectors

    · The EVB-LAN9252-4PORT supportsSPI and SQI based PDI configurations with onboard PIC32MX and option to plug-in third part SOC's like Beagle Bone Black

    · Option for onboard Fiber Interface via SFP module

    · The onboard EEPROM to configure the EtherCAT salve configuration

Документация:
  • Схемотехника
  • BOM
  • Топология платы
  • Тестирование
Описание:

EVB-LAN9252-ADD-ON is designed to be used as an add-on board (ESC board) with the Beckhoff EL9800 or EL9820 EtherCAT evaluation platform. This board supports the SPI and DIGIO PDI modes of operation.

Возможности:

    • The EVB-LAN9252-DIGIO supports option to select DIG-IO PDI and SPI configurations.
    • Onboard EEPROM to configure the EtherCAT slave configuration (ESC)
    • The EVB-LAN9252-ADD-ON provides two Integrated PHY's via on board RJ45 8P8C Connectors.

Документация:
  • Даташит
  • Схемотехника
  • Програмное обеспечение
  • BOM
  • Топология платы
  • Тестирование
Описание:
The LAN9313M is a full-featured, three-port 10/100 managed Ethernet switch designed for embedded applications where performance, flexibility, ease of integration and system cost control are required. The LAN9313M combines all the functions of a 10/100 Ethernet switch system, including the Switch Fabric, packet buffers, Buffer Manager, MACs, PHY transceivers, and serial management. The 9313M hosts a connector to an external PHY. This MAC interface supports a standard 40-pin (female) MII connector.
Возможности:

    The LAN9313M combines all the functions of a 10/100 Ethernet switch system, including the Switch Fabric, packet buffers, Buffer Manager, MACs, PHY transceivers, and serial management.

Документация:
  • Топология платы
Описание:
The LAN9313P is a full-featured, three-port 10/100 managed Ethernet switch designed for embedded applications where performance, flexibility, ease of integration and system cost control are required. The LAN9313M combines all the functions of a 10/100 Ethernet switch system, including the Switch Fabric, packet buffers, Buffer Manager, MACs, PHY transceivers, and serial management. The 9313M hosts a connector to an external MAC. This PHY interface supports a standard 40-pin (male) MII connector.
Возможности:

    The LAN9313M combines all the functions of a 10/100 Ethernet switch system, including the Switch Fabric, packet buffers, Buffer Manager, MACs, PHY transceivers, and serial management.

Документация:
  • Топология платы
Описание:
The EVB-LAN9353 is an Evaluation Boardthat utilizes the LAN9353 to provide a fully functional three-port Ethernet Switch with DualRMII or Single MII/RMII/Turbo MIIInterface . The EVB-LAN9353 provides two fully integrated MAC/PHY Ethernet portsPort 1 & 2 via on-board RJ45 connectors. Port 0 provides two MII port connectors which support the following: An external MII-/RMII-/Turbo MII-capable MAC with LAN9353 in PHY mode, via the on-board 40-pin male MII connector, an external MII-/Turbo MII-capable PHY with LAN9353 in MAC mode, via the on-board 40-pin female MII connector.
Возможности:

    1. The EVB-LAN9353- supports two Integrated PHY's via on board RJ45 Connectors.

    2. The EVB-LAN9353-supports Single MII/RMII/Turbo MII or Dural MII

    3. Option for onboard Fiber Interface via SFP module

    4. The onboard EEPROM to configure the Switchconfiguration

Документация:
  • Схемотехника
  • BOM
  • Тестирование
Описание:
The EVB-LAN9354 is an Evaluation Boardthat utilizes the LAN9354 to provide a fully functional three-port Ethernet Switch with SingleRMIIInterface . The EVB-LAN9354 provides two fully integrated MAC/PHY Ethernet portsPort 1 & 2 via on-board RJ45 connectors. Port 0 provides two MII port connectors which support the following: An external RMII -capable MAC with LAN9354 in PHY mode, via the on-board 40-pin male MII connector, an external MII-/Turbo MII-capable PHY with LAN9354 in MAC mode, via the on-board 40-pin female MII connector.
Возможности:

    • The EVB-LAN9354- supports two Integrated PHY's via on board RJ45 Connectors.
    • The EVB-LAN9354-supports Single RMII
    • Option for on-board Fiber Interface via SFP module
    • The on-board EEPROM to configure the Switch configuration

Документация:
  • Даташит
  • Схемотехника
  • BOM
  • Тестирование
Описание:
The SEC1210 is a low-cost, low-power, dual port Smart Card controllers with USB, SPI or UART interfaces. Using a combination of hardware and software, these devices deliver high-performance and flexible design customization options. The SEC1210 utilize SMSCs TrustSpan technology which enables digital systems to securely communicate, process, move and store information on system boards, across networks and through the cloud. Up-to-date EMV and USB certifications enhance interoperability with all of the latest and legacy Smart Cards and host operating systems.
Возможности:

    • Low Cost
    • Low Power
    • Dual Port

Документация:
  • Даташит
  • Схемотехника
  • Програмное обеспечение
  • Топология платы
  • Тестирование
Описание:
The SEC1210 is a low-cost, low-power, dual port Smart Card controllers with USB or UART interfaces. Using a combination of hardware and software, these devices deliver high-performance and flexible design customization options. The SEC1210 utilize SMSCs TrustSpan technology which enables digital systems to securely communicate, process, move and store information on system boards, across networks and through the cloud. Up-to-date EMV and USB certifications enhance interoperability with all of the latest and legacy Smart Cards and host operating systems.

The EVB-SEC1210-URT supports the UARTinterface only.
Возможности:

    • Low Cost
    • Low Power
    • Dual Port

Документация:
  • Даташит
  • Схемотехника
  • Програмное обеспечение
  • Топология платы
  • Тестирование
Описание:
The EVB-UFX6000-TC is a USB 2.0 ViewSpan graphics solution that utilizes 480 Mbps Hi-Speed USB technology as a display interface. Capable of interfacing with VGA, DVI and HDMI-enabled displays without glue logic. ViewSpan is capable of supporting full 1080p HD resolution over a USB Hi-Speed link.
Возможности:

    Capable of interfacing with VGA, DVI and HDMI-enabled displays without glue logic.

Описание:
The EVB-UFX7000 is a USB 3.0 ViewSpan5G graphics solution that utilizes 5 Gbps SuperSpeed USB technology as a display interface. Capable of interfacing with VGA, DVI and HDMI-enabled displays without glue logic. ViewSpan5G is fully backward-compatible with USB 2.0 and is capable of supporting full 1080p HD resolution over either a USB SuperSpeed or Hi-Speed link.
Возможности:

    Capable of interfacing with VGA, DVI and HDMI-enabled displays without glue logic.

Описание:
The SMSC EVB-USB2250 is an Ultra-Fast USB 2.0 Multi-Slot Flash Media Controller with CF, SD, MS, and xD connectors. The EVB-USB2250 Evaluation Board demonstrates a standalone high speed Mass Storage Class Peripheral Controller intended for reading and writing to more than 24 popular flash media formats from the Compact FlashTM CF, SmartMediaTM SM, xD Picture CardTM xD, Memory StickTM MS, Secure Digital SD, and MultiMediaCardTM MMC families. This cardreader Evaluation Board features an on-board EEPROM for configuration and serial number data, as well as a socket for a flash media device for firmware updates.
Возможности:

    an Ultra-Fast USB 2.0 Multi-Slot Flash Media Controller with CF, SD, MS, and xD connectors.

Документация:
  • Схемотехника
  • Тестирование
Описание:
The SMSC USB2514 is a Low-Power Full-Featured Full-Speed USB 2.0 compliant hub with four down-stream ports. The EVB-USB2514B-FS Evaluation Board demonstrates a standalone application for the hub. It is designed to robustly demonstrate the unique features of this device using a low-cost PCB implementation with individual port power control. The Evaluation Board is Full-Speed 12Mbits/s and Low-Speed 1.5Mbits/s compatible with self-powered operation available.
Возможности:

    The EVB-USB2514B-FS Evaluation Board demonstrates a standalone application for the hub.

Документация:
  • Даташит
  • Схемотехника
  • Тестирование
Описание:
The EVB-USB2534BC is a 4-layer RoHS-compliant Evaluation Board that utilizes the USB2534 to provide a fully functional 4-port high-speed hub with battery charging capabilities. The USB2534 is pin compatible with the industry leading USB2514B USB2.0 hub allowing simple migration of USB2512B designs. The USB2532 is configured for operation through internal default settings and supports custom configurations through the ProTouch and ProLink tools, and optionally through an external 2-Mbit SPI Flash socketable device. The EVB-USB2534BC demonstrates driver compatibility with Microsoft Windows 7, Windows XP, Mac OS X 10.4 and Linux hub drivers.
Возможности:

    The USB2534 is pin compatible with the industry leading USB2514B USB2.0 hub allowing simple migration of USB2512B designs.

Документация:
  • Даташит
  • Схемотехника
  • Тестирование
Описание:
The EVB-USB2642 is a customer evaluation board that contains an Ultra Fast USB 2.0 Multi-Format Flash Media Controller, a USB 2-port Hub Combo, and a UCS81001 Port Power Controller with Charger Emulation. This evaluation board supports an external certification chip, an SMBus header interface to monitor I2C traffic from the USB to I2C bridge, as well as either an external I2C EEPROM or SPI flash device for customized functionality.
Возможности:

    This evaluation board supports an external certification chip, an SMBus header interface to monitor I2C traffic from the USB to I2C bridge, as well as either an external I2C EEPROM or SPI flash device for customized functionality.

Документация:
  • Даташит
  • Схемотехника
  • Топология платы
  • Тестирование
Описание:
The SMSC USB2660 contains an Ultra Fast USB 2.0 Hub, Flash Media Controller, and Protocol Bridge Combo. The EVB-USB2660 Evaluation Board demonstrates a standalone application for developers of the following applications: Flash Media Card Reader/Writer, printers, desktop and mobile PCs, consumer A/V, and flat panel displays, among others. It supports media connectors for the xD Picture CardTM xD, Memory StickTM MS, two Secure Digital SD, and MultiMediaCardTM MMC interfaces. The EVB-USB2660 is designed to demonstrate the unique features of this device using a low-cost PCB implementation with individual port power control for the two downstream USB 2.0 ports. It is designed to support internal default configuration settings and either an external I2C EEPROM optional for customized configured functionality or SPI flash for customized configured functionality or for external firmware.
Возможности:

    USB2660 USB 2.0 2 Port Hub with Ultra Fast Flash Media Controller Eval Board

Документация:
  • Схемотехника
  • Тестирование
Описание:
The USB3320 is a highly integrated full featured Hi-Speed USB 2.0 transceiver based on our proven ULPI interface. The USB3320 provides an extremely flexible solution in a convenient 5x5mm QFN package. It supports a wide variety of different reference clock frequencies with one single part, as well as accepting clocking from crystal/resonators and the ULPI 60MHz Clock-In mode. As with previous generations of our USB transceivers, the USB3320 integrates a USB switch and both ESD and VBUS over-voltage protection devices.
Возможности:

    USB Transceiver w/ULPI Interface Evaluation Board

Документация:
  • Схемотехника
  • Тестирование
Описание:
Microchip's USB333x family of Hi-Speed USB 2.0 transceivers delivers enhanced USB functionality for the portable market with support for the latest USB-IF Battery Charging 1.2 (BC 1.2) specification. This family of devices dramatically reduces the time required for battery charging and system bill-of-material (BOM) costs by up to 60% over competitive solutions. Microchip has positioned itself as a leader in providing innovative solutions in support of the latest USB-IF Battery Charging specification. The new USB333x provides an excellent compliment to USB charging ports by enabling portable devices to negotiate up to three times the charging current compared to a standard USB port, resulting in faster battery charging. The USB333x is designed in a small footprint package and reduces the number of external components through the integration of voltage regulators and other discretes. Additionally, Microchip's complimentary and confidential USBCheck™ online design review service is available for customers who select the USB333x for their application design-in*.
Возможности:

    Highlights

    Highly-integrated, Hi-Speed USB 2.0 transceivers
    Integrated VBUS over-voltage protection (up to +30V)
    Integrated regulators allow single supply operation
    Extremely high ESD performance in a Hi-Speed USB transceiver
    ±8kV HBM with up to ±25kV IEC (contact/air)
    Supports a wide variety of common reference clock frequencies
    USB-IF Battery Charger revision 1.2 support
    USB connector as a single port for data, charging
    Ultra-low standby current
    "Wrapper-less" architecture for optimized timing performance
    Hi-Speed USB On-The-Go (OTG) revision 2.0 compliant
    Link Power Management (LPM)
    Industrial (-40° to 85°C) temperature range options available
    WLCSP, RoHS-compliant package
    Target Applications

    Digital Still/Video Cameras
    Smartphones/Cell Phones
    GPS Personal Navigation Devices
    MP3/Portable Media Players (PMPs)
    External Hard Disk Drives
    Gaming Consoles

Документация:
  • Схемотехника
  • Тестирование
Описание:
The USB3340 family of Hi-Speed USB 2.0 transceivers delivers enhanced USB functionality for the portable market with support for the latest USB-IF Battery Charging 1.1 (BC 1.1) specification. This family of devices dramatically reduces the time required for battery charging and system bill-of-material (BOM) costs by up to 60% over competitive solutions. The USB3340 provides an excellent compliment to USB charging ports by enabling portable devices to negotiate up to three times the charging current compared to a standard USB port, resulting in faster battery charging. The USB3340 is designed in a small footprint package and reduces the number of external components through the integration of voltage regulators.
Возможности:

    This family of devices dramatically reduces the time required for battery charging and system bill-of-material (BOM) costs by up to 60% over competitive solutions.

Документация:
  • Схемотехника
  • Тестирование
Описание:
The USB3343 family of Hi-Speed USB 2.0 transceivers delivers enhanced USB functionality for the portable market with support for the latest USB-IF Battery Charging 1.1 (BC 1.1) specification. This family of devices dramatically reduces the time required for battery charging and system bill-of-materials (BOM) costs by up to 60% over competitive solutions. The new USB3343 provides an excellent compliment to USB charging ports by enabling portable devices to negotiate up to three times the charging current compared to a standard USB port, resulting in faster battery charging. The USB3343 is designed in a small footprint package and reduces the number of external components through the integration of voltage regulators.
Возможности:

    Hi-Speed USB 2.0 transceivers

Документация:
  • Схемотехника
  • Тестирование
Описание:
The EVB-USB3613 is a low-power, full-featured and OEM configurable Multi-Transaction Translator MTT USB 2.0 hub controller evaluation board with three downstream ports optimized for portable applications. The 3-port hub is fully compliant with the USB 2.0 Specification, USB 2.0 Link Power Management LPM Addendum, High-Speed Inter-Chip HSIC USB Electrical Specification Revision 1.0 and attaches to an HSIC upstream port as a high-speed hub. The 3-port hub supports low-speed, full-speed and high-speed downstream devices on all of the enabled non-HSIC downstream ports. The one HSIC downstream port supports only high-speed operation. The USB3613 supports both upstream and downstream battery charging BC1.2 detection.
Возможности:

    The 3-port hub is fully compliant with the USB 2.0 Specification, USB 2.0 Link Power Management LPM Addendum, High-Speed Inter-Chip HSIC USB Electrical Specification Revision 1.0 and attaches to an HSIC upstream port as a high-speed hub.

Документация:
  • Даташит
  • Схемотехника
  • Тестирование
Описание:
The USB3740 family of Hi-Speed USB switches were specifically designed to enable a range of applications to achieve single-port connectivity. Their design provides a substantial 1GHz of bandwidth, allowing for the passage of robust USB 2.0 signals. The USB3740 is a high-performance USB 2.0 switch providing excellent flexibility with very low current consumption in an extremely small package.
Возможности:

    USB3740 High Speed Switch Evaluation Board

Документация:
  • Схемотехника
  • Тестирование
Описание:
The USB3750 family of Hi-Speed USB switches were specifically designed to enable a range of applications to achieve a single-port connectivity. Their design provides a substantial 1GHz of bandwidth, allowing for the passage of robust USB 2.0 signals. The USB3750 family of highly-integrated USB 2.0 switches contains port detection and port protection within a small footprint package.
Возможности:

    Their design provides a substantial 1GHz of bandwidth, allowing for the passage of robust USB 2.0 signals.

Документация:
  • Схемотехника
  • Тестирование
Описание:
The USB3803 USB 2.0 hub controller offers three downstream ports with highly integrated portable features specifically designed for mobile embedded applications where more than one USB port is required. The USB3803 can easily attach to an upstream port as Full-Speed or Full/Hi-Speed USB hub, while supporting Low, Full and Hi-Speed downstream devices on all enabled downstream ports. Additionally, extremely low current standby and bypass mode features make the USB3803 well-suited for mobile, battery-powered embedded systems where power consumption, small package size, minimal BOM and Battery Charger (BC) detection capabilities are critical design requirements.
Возможности:

    USB3803 USB 2.0 Mobile Hub Evaluation Board

Документация:
  • Схемотехника
  • Тестирование
Описание:
The EVB-USB3813 is a low-power, full-featured and OEM configurable Multi-Transaction Translator MTT USB 2.0 hub controller evaluation board with three downstream ports optimized for portable applications. The 3 port hub is fully compliant with the USB 2.0 Specification, USB 2.0 Link Power Management LPM Addendum, High-Speed Inter-Chip HSIC USB Electrical Specification Revision 1.0 and attaches to a USB 2.0 upstream port as a high-speed hub. The 3-port hub supports low-speed, full-speed and high-speed downstream devices on all of the enabled non-HSIC downstream ports. The one HSIC downstream port supports only high-speed operation. The USB3813 supports both upstream and downstream battery charging BC1.2 detection.
Возможности:

    The 3 port hub is fully compliant with the USB 2.0 Specification, USB 2.0 Link Power Management LPM Addendum, High-Speed Inter-Chip HSIC USB Electrical Specification Revision 1.0 and attaches to a USB 2.0 upstream port as a high-speed hub.

Документация:
  • Даташит
  • Схемотехника
  • Тестирование
Описание:
The EVB-USB4624BCUH is a 4-layer RoHS-compliant Evaluation Board that utilizes the USB4624 to provide a fully functional 4-port high-speed hub with battery charging capabilities. The USB4624 is fully compliant with the USB 2.0 Specification, USB 2.0 Link Power Management LPM Addendum, High-Speed Inter-Chip HSIC USB Electrical Specification Revision 1.0 and supports both a HSIC and a USB 2.0 upstream host. The USB4624 has four downstream ports and supports both upstream and downstream battery charging. The USB4624 is configured for operation through internal default settings and supports custom configurations through the ProTouch tool or an external 8-Mbit SPI Flash device. The EVB-USB4624BCUH demonstrates driver compatibility with Microsoft Windows 7, Windows XP, Mac OS X 10.4 and Linux hub drivers.
Возможности:

    The USB4624 is fully compliant with the USB 2.0 Specification, USB 2.0 Link Power Management LPM Addendum, High-Speed Inter-Chip HSIC USB Electrical Specification Revision 1.0 and supports both a HSIC and a USB 2.0 upstream host.

Документация:
  • Даташит
  • Схемотехника
  • Тестирование
Описание:
EVB-USB4640 Revision C Evaluation Board is for the SMSC USB4640 Hi-Speed HSIC USB hub and card reader combo solution. It has an upstream port compliant to HSIC 1.0 using dual UFL connectors, a supplement to the USB 2.0 Specification. It also has two downstream ports that are compliant with the USB 2.0 Specification. The goal of the EVB-USB4640 is to provide an application platform for developers of the following applications: Flash Media Card Reader/Writer, printers, desktop and mobile PCs, consumer A/V, flat panel displays, and 3G/4G handsets, smartphones, cell phones, and other mobile devices. The EVB-USB4640 is a demonstration and evaluation platform featuring the USB4640 Ultra Fast interface between an HSIC enabled host and today's popular flash media formats. It is designed to support internal default settings and either an external I2C EEPROM for customized functionality or SPI Flash for external firmware.
Возможности:

    USB4640 HSIC 1.0 to USB 2.0 2-Port Hub w/ Ultra Fast Flash Media Controller Eval

Документация:
  • Схемотехника
  • Тестирование
Описание:

USB evaluation board for a four port SmartHub for USB2.0 Hi-Speed.

Возможности:

    Four port USB2.0 Hi-Speed Smart hub

    USB bridging for UART, GPIO, SPI, and I2C.

    FlexConnect

Документация:
  • Даташит
  • BOM
  • Тестирование
Описание:
The EVB-USB5534 is a customer evaluation board that features the USB5534B 4-port USB 3.0/2.0 hub. The USB5534B hub supports SuperSpeed SS, Hi-Speed HS, Full-Speed FS, and Low-Speed LS USB signaling for complete coverage of all defined USB operating speeds. All four of the downstream ports are USB 2.0 and USB 3.0 compliant. This evaluation board supports an external SMBus header interface as well as a 2-Mbit SPI flash device for customized functionality.
Возможности:

    The USB5534B hub supports SuperSpeed SS, Hi-Speed HS, Full-Speed FS, and Low-Speed LS USB signaling for complete coverage of all defined USB operating speeds.

Документация:
  • Схемотехника
  • Тестирование
Описание:
The MicrochipAutomotive Grade USB 2.0 4-Port Hub is designed, fabricated, tested, characterized and qualified for automotive applications. The USB82514 MultiTRAK™ is a low-power, OEM configurable, full featured Hi-Speed USB 2.0 compliant hub contnroller IC with four down-stream ports for embedded USB solutions. The EVB-USB82514 36-Pin QFN Evaluation Board demonstrates a stand alone application for the hub with all the features listed below and demonstrates the advanced power saving options and configurable port assignments.
Возможности:

    The Microchip Automotive Grade USB 2.0 4-Port Hub is designed, fabricated, tested, characterized and qualified for automotive applications. The USB82514 MultiTRAK™ is a low-power, OEM configurable, full featured Hi-Speed USB 2.0 compliant hub contnroller IC with four down-stream ports for embedded USB solutions. The EVB-USB82514 36-Pin QFN Evaluation Board demonstrates a stand alone application for the hub with all the features listed below and demonstrates the advanced power saving options and configurable port assignments.

Документация:
  • Даташит
  • Схемотехника
  • Тестирование
Описание:

Данный протестированный базовый проект представляет собой хаб на 4 порта USB3.0. Возможно устанавливать сверхбыстрые, быстрые и полноскоростные соединения на порте для связи с головным устройством, а также сверхбыстрые, быстрые, полноскоростные и медленные соединения на портах для связи с периферийными устройствами. Дизайн хаба предполагает управление питанием отдельных портов для связи с периферийными устройствами, а также защиту от перегрузки.

 

Возможности:

  • Полноценный хаб на 4 порта USB 3.0
  • Поддержка управления питанием отдельных портов
  • Защита от электростатического разряда как на порте для связи с головным устройством, так и на портах для связи с периферийными устройствами
  • Функционирует при питании как от шины, так и от внешнего источника питания
  • Устройство, поддерживающее USB 3.0 и USB 2.0
  • Схема электрическая принципиальная, трассировка платы, результаты испытаний и конструкторская документация для простоты повторного использования

Документация:
  • Даташит
  • Схемотехника
  • BOM
  • Топология платы
Описание:

Референс дизайн электронного ключа с повторителем с USB 2.0 и USB 3.0 подключается напрямую к головному USB-порту и передаёт высокоскоростные или сверхвысокоскоростные сигналы на нисходящий порт для обеспечения подключения к устройству со сверхвысокоскоростным или высокоскоростным USB с помощью длинного кабеля.

Данный базовый проект имеет характер аппаратного решения.

Возможности:

  • Дизайн «Plug and Play»
  • Получает питание по USB-шине, что позволяет устранить необходимость во внешнем источнике питания
  • Совместим с USB2.0 и USB3.0
  • Поддерживает все малопотребляющие режимы системы
  • Совместим с протоколами USB On The Go (OTG) и Battery Charging (BC 1.2)
  • Малогабаритное решение

Документация:
  • Даташит
  • Схемотехника
  • BOM
  • Топология платы
Описание:

Базовый проект «удлинителя» для USB-порта типа C на передней панели компьютера подключается к интегрированным разъёмам USB3.0 на материнской плате и осуществляет обработку высокоскоростных и сверхскоростных сигналов для последующей их передачи на удалённый USB-разъём типа C на передней панели компьютера. Данный модуль позволяет добавить на материнскую плату два полнофункциональных USB-разъёма типа C вместо одно интегрированного USB-разъёма.

Данный базовый проект имеет характер аппаратного решения.

Возможности:

  • Работает от напряжения питания 5 В, передаваемого по шине VBUS от материнской платы, и не требует наличия внешнего источника питания
  • Совместимость с USB2.0 и USB3.0
  • Поддержка всех состояний системы с низким уровнем энергопотребления
  • Подключение на USB типа C
  • Данный малогабаритный проект позволяет упростить реализацию системы

Документация:
  • Схемотехника
  • BOM
  • Топология платы
  • Тестирование
Описание:

В базовом проекте мобильного терминала оплаты для уменьшения габаритов и стоимости системы используется литий-ионная батарея с архитектурой 1S1P. Для уменьшения потребляемой мощности в режиме ожидания и максимизации продолжительности работы системы от батареи с целью задействования архитектуры батареи с одной ячейкой используются интегрированные переключатели нагрузки. Также для поддержки увеличенной мощности и минимизации времени заряда используется зарядный порт USB типа C.

Данный базовый проект имеет характер аппаратного решения.

Возможности:

  • Архитектура батареи с низким напряжением 1S1P благодаря шине низкого напряжения питания (5 В) принтера, управляемой DRV8833
  • Зарядный порт USB типа C с использованием TUSB320 и BQ25890 позволяет переводить существующие реализации USB на новые стандарты
  • Переключатель нагрузки TPS22918 в малогабаритном корпусе SOT-23 с током утечки около 500 нА отключает неактивные подсистемы с целью увеличения продолжительности работы системы от батареи
  • TCA8414 интегрирует в одном корпусе сканер клавиатуры и расширитель портов ввода / вывода, что позволяет упростить дизайн и уменьшить общее количество использованных компонентов

Документация:
  • Даташит
  • Схемотехника
  • BOM
  • Топология платы
Описание:
Проект TIDA-01373 представляет собой пример аппаратного и программного обеспечений средства программирования интегрированных драйверов вентильных двигателей постоянного тока (Brushless DC, BLDC) DRV10983, DRV10975, DRV10983-Q1 и DRV10987. В указанных устройствах используются конфигурируемые регистры EEPROM-памяти, которые должны быть настроены в соответствии с параметрами двигателя. В данном проекте описываются подробности процесса одновременного программирования до 8 устройств драйверов двигателей пользовательскими значениями параметров двигателей.

Базовый проект имеет характер аппаратно-программного решения.
Возможности:

  • Аппаратная / программная поддержка до 8 устройств
  • Пользовательские настройки EEPROM-памяти
  • 2-проводной интерфейс JTAG для обеспечения коммуникации с микроконтроллером (МК)
  • ЖК-дисплей для считывания пользователем подтверждений
  • Один выключатель в решении с двумя печатными платами

Документация:
  • Даташит
  • Схемотехника
  • BOM
  • Топология платы
Описание:
В данном проекте, предназначенном для применения в автомобильной технике, демонстрируется уникальный подход к созданию медиапортов, которые требуется использовать для передачи данных. Данный проект поддерживает интерфейс USB 2.0 благодаря наличию порта стандарта USB Type-CTM. Разработчики смогут улучшить свои системы с медиапортами благодаря использованию данного полноценнного проекта, состоящего из аналоговых интегрированных схем (ИС), имеющих лицензии AEC-Q100 для применения в автомобильной технике и успешно прошедших тестирования на соответствия требованиям стандарта CISPR-25 к устройствам класса 5. Данный проект обеспечивает минимизацию трудоёмкости процесса разработки благодаря использованию гибкого пассивного решения, которое способно меняться ролями с головным устройством и заряжать как устройства с портом стандарта USB Type-C, так и устройства с портами предыдущих стандартов, характеризуясь при этом малыми (1 дюйма x 2 дюйма) габаритами.

Базовый проект имеет характер аппаратного решения.
Возможности:

  • Малогабаритное решение на базе габаритов типовой печатной платы медиаинтерфейса (1 дюйм x 2 дюйма)
  • Функции защиты от короткого замыкания на батарею и сброса нагрузки автомобильного генератора с амплитудами всплесков напряжения до 40 В
  • Оптимизированный источник питания LMS3635-Q1, имеющий лицензию для применения в автомобильной технике, с уникальным корпусом HotrodTM обеспечивает снижение уровней паразитных наводок с целью снижения уровней ЭМП без задействования частотных диапазонов AM и FM
  • TUSB213-Q1 обеспечивает оптимизацию уровня производительности при высокоскоростной работе для успешного прохождения тестирований на соответствие требованиям спецификации USB-IF при тестировании индикаторной диаграммы на ближнем и дальнем концах кабеля длиной до 3 метров
  • Совместим с лидирующими системами стандарта USB On-The-Go (USB OTG)

Документация:
  • Схемотехника
  • BOM
  • Топология платы
  • Тестирование
Описание:
The USB-C™ to DisplayPort Active Cable reference design is a framework that can enable DisplayPort video signaling over a USB-C connection. Traditionally, DisplayPort connectors are the only way to transfer DisplayPort video but this connector can be large and are not ideal for small electronics. While a smaller USB Type-C connector allows DisplayPort video to transfer from smaller electronics, these cables are shorter, ranging from 1 – 2 meters in length. This design features DisplayPort video transfers over 5-meter cables with a single USB-C cable connection, enabling –DisplayPort communication between legacy DisplayPort sink to new USB-C source.
Возможности:

Features
  • Bi-directional USB-C to DisplayPort
  • Supports VESA DisplayPort Alt Mode to USB-C
  • UFP and DFP configuration
  • Integrated USB Billboard
  • Operates over entire VCONN range of 2.7 V to 5.5 V
  • Supports up to 5 meter DisplayPort cable

Документация:
  • Даташит
  • Схемотехника
  • Програмное обеспечение
  • BOM
  • Топология платы
Описание:

The TUSB1064RNQEVM evaluation board is a USB Type-C to VESA DisplayPort™, Alternate Mode, redriving switch which supports data rates up to 10 Gbps for an Upstream facing port (device). This guide describes how to bring up the EVM, and includes schematics that can be used as a reference design for Alternate Mode implementations of the system with the TUSB1064 device.

The TUSB1064 s a VESA USB Type-C™ Alt Mode redriving switch supporting USB 3.1 data rates up to 10 Gbps and DisplayPort 1.4 up to 8.1 Gbps for upstream facing port (Sink). The device is used for UFP_D pin assignments C, D, and E from the VESA DisplayPort Alt Mode on USB Type-C Standard. The TUSB1064 provides several levels of receive linear equalization to compensate for inter symbol interference (ISI) due to cable and board trace loss. Operates on a single 3.3-V supply and comes in a commercial temperature range and industrial temperature range.

Документация:
  • Даташит
  • Схемотехника
  • BOM
  • Топология платы
Описание:

The TUSB564RNQEVM device is a USB Type-C / VESA DisplayPort™, Alternate Mode, re-driving switch which supports data rates up to 10 Gbps for an upstream facing port (device). This guide describes how to bring up the EVM, and includes schematics that can be used as a reference design for Alternate Mode implementations of the system with the TUSB564 device.

The TUSB564 is a VESA USB Type-C™ Alt Mode re-driving switch supporting USB 3.1 data rates up to 5 Gbps and DisplayPort 1.4 up to 8.1 Gbps for upstream facing port (Sink). The device is used for UFP_D pin assignments C, D, and E from the VESA DisplayPort Alt Mode on USB Type-C Standard.

The TUSB564 provides several levels of receive linear equalization to compensate for inter symbol interference (ISI) due to cable and board trace loss.

Operates on a single 3.3-V supply and comes in a commercial temperature range and industrial temperature range.

Документация:
  • Даташит
  • Схемотехника
  • BOM
*Информация о ценах и сроках поставки носит информационный характер. Офертой является только выставленный счет.

Сравнение позиций

  • ()