Каталог решений

forward

Телевизор: LCD/цифровой

Описание:
PMP10538 is a Single-Phase Synchronous Boost Converter using the LM5122 controller IC. The design accepts an input voltage of 18Vin to 20Vin and provides an output of 30Vout to 54Vout, capable of supplying 1.7A of continuous current to the load or 0A to 3.4A Max. The output voltage can be adjusted between 30Vout and 54Vout by driving the Vadj. input of the Op-Amp circuit between 0V and 3V.

Возможности:

High efficiency design Adjustable output voltage Cycle-by-Cycle Current limit with programmable hiccup mode overload protection Precision voltage reference accuracy of ±1% Synchronizable to external clock

Возможность заказа
  • Заказать BOM
Документация:
  • Схемотехника
  • BOM
  • Тестирование
Описание:
PMP5161 is a 24V to 150V boost with full load of ВЅ A off 150V using UCC2813 controller. Control is current mode to limit current drawn from source during ramp up of output. Low cost LM317 provides the 10V bias for the UCC2813.
Возможность заказа
  • Заказать BOM
Документация:
  • Схемотехника
  • BOM
  • Тестирование
Описание:
This 25W discontinuous current-mode boost converter provides a low ripple voltage of less than 1% and efficiency of greater than 94% at 24V input. Aluminum output caps are utilized, ensuring excellent load transient capability. An external control voltage allows the user to adjust the output voltage by +/-10%.
Возможность заказа
  • Заказать BOM
Документация:
  • Схемотехника
  • BOM
  • Тестирование
Описание:
PMP9393 is a Single-Phase Synchronous Boost Converter which utilizes the LM5122 controller IC. The design accepts an input voltage of 18Vin to 20Vin and provides an output of 48Vout capable of supplying a maximum of 3A of current to the load. DCR current sensing has been implemented in order to reduce the BOM cost associated with using a high power current sense resistor.

Возможности:

Synchronous rectifier for high efficiency High power density Lower temp rise in output rectifier Synchronizable to external clock Stackable for higher output currents Bypass mode capable when Vin >Vout

Документация:
  • Схемотехника
  • BOM
  • Тестирование
Описание:
The SimpleLink™ multi-standard CC2650 remote control reference design is an all-in-one solution for development of voice-based Bluetooth® low energy, ZigBee® RF4CE™ or multi-standard remote controls. The reference design demonstrates the recommended layout for decoupling and RF in order to achieve the best RF performance. The design uses discrete components for the balun and filter and an inverted F PCB antenna which gives good performance at a low cost.
Возможности:

Designed to comply with ETSI (EN300328) and FCC (FCC part 15.247) specifications Multi-standard, Bluettoh low energy and Zigbee RF4CE connectivity Advanced features such as voice-activated commands and search Ultra-low power with low active and sleep current, fast start-up times and fast switching between modes

Возможность заказа
  • Заказать PCB
Документация:
  • Схемотехника
  • BOM