Каталог решений

forward

Процессор (Программируемый контроллер) (16)

Описание:
The PIC32 VGA Camera Sensor (VCS) PICTail™ Plus (AC164150) is a demonstration board for evaluating Microchip Technology’s basic surveillance and vision solutions using 32-bit microcontrollers. It can capture & process 8-bit gray scale or color images with up to 640x480 resolution. It interfaces to the I/O expansion board (DM320002) with PIC32 starter kits (DM320004 or DM320003-2), Graphics Controller PICTail™ Plus Epson S1D13517 Board (AC164127-7) and Graphics Display Truly 5.7” 640x480 Board (AC164127-8).
Возможности:

    • 640x480 VGA Color CMOS Sensor on our standard PICTail™ plus form factor
    • Based on the Omnivision OVM7690 CameraCubeChipTM
    • Convenient test points for video sync and clock sync
    • Jumper configurable for display out or image transport over Ethernet
    • Typical Applications include Image capture, Processing and Connectivity

    Note: When using the PIC32 Ethernet Starter kit (DM320004), an external crystal needs to be attached to (Y1) on the board

Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование
Описание:
This adapter enables PIC32 Starter Boards to connect to the Plug-In Module on Explorer 16. Users can inspect the functionality on the Explorer 16 or connect PICtail Plus daughter cards for application-specific development.
Возможности:

    See document below.

Документация:
  • Тестирование
Описание:
The Microchip PIC32MZ Starter Kit Adaptor Board, features a 168-pin to 132-pin connector, enables the use of PIC32MZ starter kits that have a 168-pin interface with the following PIC32 hardware:

  • Multimedia Expansion Board (MEB) – Part # DM320005
  • PIC32 I/O Expansion Board – Part # DM320002
  • Low-Cost Controller-less (LCC) Graphics PICtail Plus Daughter Board – Part # AC164144
  • Graphics LCD Controller PICtail Plus SSD1926 Board – Part # AC164127-5
  • Graphics PICtail Plus Epson S1D13517 Board – Part # AC164127-7
Возможности:

    .

Документация:
  • Даташит
  • Тестирование
Описание:
The PIC32 Audio Codec Daughter Board AC320100 is a high-performance stereo codec board for selected PIC32 hardware development platforms. This board features the AKM AK4642EN stereo codec, which includes built-in microphone and headphone amplifiers. This board is suitable for adding audio input and output capabilities to the PIC32 Bluetooth Starter Kit (DM320018), and is compatible with the PIC32 Bluetooth Audio Development Kit (DV320032).

- Based on the AKM 4642 16-bit audio codec
- The board replaces the Audio DAC (AK4384) daughter board on the PIC32 Bluetooth Audio Development Kit (DV320032)
- This enables microphone capability and full duplex audio I2S from the PIC32
o Audio voice capture
o Bluetooth Hands free profile
o Integrated MEMS microphone on board, or external microphone input
- Can enable the PIC32 Bluetooth Starter Kit (DM320018) with audio in specific applications
- Has a new application featured in MPLAB Harmony v1.03 and later, with more to come
Возможности:

    The PIC32 Audio Codec Daughter Board AC320100 features include:
    • AK4642EN Stereo Input / Output Codec
    • MCP1801 Power Regulator
    • On-board MEMs Microphone
    • 3.5 mm Inputs and Outputs:
    - Line In
    - External Mic In
    - Line Out
    - Headphone Out

Документация:
  • Даташит
  • Тестирование
Описание:
The PIC32 mTouch Capacitive Touch Evaluation Board is designed to facilitate the development of capacitive touch-based applications using PIC32-series microcontrollers. This evaluation board includes an on-board PICkit serial interface, an ICSP header, a USB connector (for power only), and a 16-bit LED display. The board also includes a 24-pin header that can be used to interface the 2-channel and 4-channel slider plug-in boards, the 12-matrix key plug-in board and the 8-direct key plug-in board. These plug-in boards are included in the mTouch Capacitive Touch Evaluation Kit (sold separately, DM183026-2).
Возможности:

    N/A

Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование
Описание:
Microchip’s 200W DC/DC LLC Resonant Converter Reference Design operates over a wide input voltage range (350 - 420Vdc) with a nominal input of 400V, providing a 12V DC output, while maintaining high-voltage isolation between the primary and secondary. High efficiency is achieved through Zero Voltage Switching (ZVS) on the half-bridge converter and Zero Current Switching (ZCS) on the synchronous rectifier. A synchronous rectifier is implemented over the traditional full wave rectifier for improved efficiency. The DC-DC LLC Resonant Converter Reference Design utilizes Microchip’s digital power conversion dsPIC for unique “adaptive” control of the half-bridge converter and synchronous rectifier.

This reference design is implemented using a single dsPIC33F “GS” digital-power DSCs from Microchip that provides the full digital control of the power conversion and system management functions. As shown in this reference design the dsPIC33F ‘GS’ devices enable designers to easily and cost effectively create products using advanced switching techniques such as LLC that lower switching losses and enable efficiencies as high as 95%. The DC to DC LLC Converter Reference Design is royalty free when used in accordance with the licensing agreement.

Do you want a demonstration?

Please contact local sales office in your geography to request a demonstration.
Click here to find worldwide network of Sales & Support
Возможности:

    • Low power consumption at no load
    • Programmable soft-start
    • Voltage, Current, Temperature monitoring & Protection
    • Primary and secondary MOSFET control
    • Full Digital Control

Документация:
  • Даташит
  • Тестирование
Описание:
Microchip’s Digital Pure Sine Wave Uninterruptible Power Supply (UPS) Reference Design is based on the dsPIC33F “GS” series of digital-power Digital Signal Controllers (DSCs). This reference design demonstrates how digital-power techniques when applied to UPS applications enable easy modifications through software, the use of smaller magnetics, intelligent battery charging, higher efficiency, compact designs, reduction in audible and electrical noise via a purer sine-wave output, USB communication and low-cost overall bill-of-materials. This reference design is Royalty Free. Click here for a list of complete documentation and software & hardware design information.

This reference design is implemented using a single dsPIC33F “GS” digital-power DSCs from Microchip that provides the full digital control of the power conversion and system management functions. As shown in this reference design the dsPIC33F ‘GS’ devices enable designers to easily and cost effectively create products using advanced switching techniques such as LLC that lower switching losses and enable efficiencies as high as 95%. The DC to DC LLC Converter Reference Design is royalty free when used in accordance with the licensing agreement.

The Digital Pure Sine Wave UPS System operates in two modes:

Standby Mode – Operational in the presence of AC line voltage; battery is charged in this mode.
UPS Mode – Operational during power outage; the system switches to a function called inverter to provide power to load. Charge stored in the battery is converted to AC output.

Do you want a demonstration?

Contact local sales office in your geographical location and request for a demonstration.
Click here to find worldwide network of Sales & Support
Возможности:

    • High-frequency design
    • Adjustable Charging current
    • Efficiency of 84%
    • Pure sine wave output with THD <3%
    • Mains to Battery Transfer time < 12 ms
    • Supports Crest Factor of 3:1
    • Minimum Power Factor(Leading/Lagging) of 0.65
    • Fault indications
    • USB Communication with PC
    • LCD front panel

Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование
Описание:
The PIC18 Starter Kit functions as a USB mouse, joystick or mass storage device all using the on-board capacitive touch sense pads. It includes a MicroSD™ memory card, potentiometer, acceleration sensor, and OLED display. With on-board debugger and programming, and USB power, the starter kit is a low-cost way to get started with the PIC18 family.

This board features the PIC18F46J50 MCU with 64KB Flash, 4KB RAM, XLP low power, mTouch touch sensing and USB. The MCU is running Microchip’s FREE USB bootloader and software framework. The starter kit source code and other resources are included in the MCHPFSUSB Framework, which can be downloaded from Microchip Application Libraries.

Newer version development tools are available now. Please consider Explorer 8 Development Board (DM160228) for new designs
Возможности:

    • PIC18F46J50 MCU with 64KB Flash
    • 4KB RAM
    • XLP low power
    • mTouch touch sensing
    • USB.

Документация:
  • Даташит
  • Тестирование
Описание:
The enhanced mTouch Capacitive Touch Evaluation Kit provides a simple platform for developing a variety of capacitive touch sense applications using PIC16F, PIC18F, PIC24F and PIC32 microcontrollers. The Diagnostic Tool provided allows the user to analyze application-critical information in real-time as it relates to touch sensor behavior.

Mother boards for PIC32MX CTMU (AC323027) and PIC24H (AC243026) as well as a Metal Over Cap Accessory kit (AC183026) are also available.

The mTouch Capacitive Touch SW package is included in Microchip Application Libraries.
Возможности:

    • Asimple platform
    • Diagnostic tool to analyze application-critical information
    • Real-time as it relates to touch sensor behavior

Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование
Описание:
The Explorer 16 Development Board is a low-cost modular development system for Microchip’s 16-bit and 32-bit microcontrollers. It supports devices from the PIC24, dsPIC and PIC32 families. A variety of families are supported with processor Plug-In Modules (PIMs) for easy device swapping. The board includes a PICtail Plus daughter card connector for expansion boards including USB, CAN, Ethernet, wireless, graphics and many more. Coupled with the MPLAB ICD 3 In Circuit Debugger or MPLAB REAL ICE, real-time emulation and debug facilities speed evaluation and prototyping of application circuitry.

Recommendation for Migration:
For 'New Designs' or advanced features requirement, migrate to refreshed and cost effective "Explorer 16/32 Development Board" with several new features. Offering backwards compatibility, the Explorer 16/32 development board facilitates seamless migration from Explorer 16 development board to the new platform.
For further details explore:
Возможности:

  • Includesprocessor PIMs for both PIC24 and dsPIC families
  • Alpha-numeric 16 x 2 LCD display
  • Interfaces to MPLAB ICD 3, MPLAB REAL ICE and RS-232
  • Includes Microchip's TC1047A high accuracy, analog output temperature sensor
  • Expansion connector to access full devices pin-out and bread board prototyping area
  • PICTailTMPlus connector for expansion boards
  • Full documentation in download section below: user's guide, schematics

Документация:
  • Даташит
  • Схемотехника
  • Програмное обеспечение
  • Тестирование
Описание:
The Explorer 16/32 Development Board is a flexible and convenientdevelopment, demonstration and testing platform for 16-bit PIC24 MCUs, dsPIC® DSCs and 32-bit PIC32 MCUs from Microchip Technology. It features all the necessary hardware to begin developing and debugging a complete embedded application. The board accepts Processor Plug-In Modules (PIMs) designed for the Explorer 16 or Explorer 16/32 development board for easy device swapping. In addition to the hardware features provided by the board, hardware expansion is possible through the use of PICtail™ Plus daughter cards and mikroBUS™ accessory boards. Coupled with the integrated PICkit™-On-Board (PKOB), MPLAB ICD 3 In-Circuit Debugger or MPLAB REAL ICE™ real-time emulation and debug facilities enable faster evaluation and prototyping of application.

Explorer 16/32 Development Board offers only the main board, giving the option to customize the other necessary components. Choose PIM of your choice based on MCUs and DSCs under consideration from wide range of Processor Plug-In Modules. This board is optimal for customers migrating from Classic Explorer 16 to new Explorer 16/32 platform, while all the necessary additional components like Processor Plug-In Modules and PICtail™ Plus Daughter Boards are already available


Also read about Explorer 16/32 Development Kit



Backwards Compatibility
Explorer 16/32 Development Board is completely backwards compatible with the Classic Explorer 16 Development Board (DM240001 and DM240002) and its associated ecosystem that include:
  • Processor Plug-In Modules (PIMs)
  • PICTail™ Plus Daughter Boards
  • Code Examples, Ptototypes and Software Libraries developed on Classic Explorer 16 development Board

Use all of existing codes, libraries, prototypes, PIMs and the PICtail Plus daughter cards interfaced via side PICtail Plus connector directly. Re-use the PICtail Plus daughter cards interfaced via vertical PICtail Plus connector using additional PICtail Plus Expansion Board (AC240100)


Getting Started
  • Read the Explorer 16/32 User's Manual (available at Documentation and Software section of this page)
  • Download the free MPLAB X IDE
  • Download the suitable MPLAB XC Compiler
  • Download and unzip the appropriate firmware demo code (available at Documentation & Software section of this page)
Возможности:

    • 100 pin Plug-In Module (PIM) socket, supporting a wide variety of 16-bit and 32-bit PIC® MCUs and dsPIC® DSCs
    • Power supply
      • USB Power through PICkit™-On-Board (PKOB), USB Type-C™ or USB-Serial Converter
      • 9-15V DC Power Supply
    • On board USB to UART/I2C™ adapter for data exchange with PC/Mac/Linux based host
    • USB Type-C™ (host/device) and Type-A (host) support for applications using USB microcontroller
    • Hardware functionality extension by attaching accessory boards via
      • PICtail™ Plus interface
      • 2x MikroElektronika mikroBUS™ interface
      • 2x Digilent Pmod™ footprint
    • Alpha-numeric 16 x 2 LCD display, 8x User LEDs, 4x Push Buttons, 10k potentiometer
    • Microchip's TC1047A high accuracy, analog output temperature sensor
    • Programmer/Debugger
      • Integrated USB programmer/debugger - PICkit™-On-Board (PKOB)
      • Interfaces to MPLAB ICD 3, MPLAB REAL ICE™, PICkit™ 3
    • Support for all the existing and new PICtail™ Plus Daughter Cards
      • Interface PICtail™ Plus Daughter Cards connected via side PICtail™ Plus connector directly
      • Interface PICtail™ Plus Daughter Cards connected via vertical PICtail™ Plus connector through additional accessory - PICtail™ Plus Expansion Board

Документация:
  • Даташит
  • Схемотехника
  • Програмное обеспечение
  • Тестирование
Описание:
The Explorer 16/32 Development Kit is a flexible, convenient and ready to start development, demonstration and testing platform for 16-bit PIC24 MCUs, dsPIC® DSCs and 32-bit PIC32 MCUs from Microchip Technology. It features all the necessary hardware to begin developing and debugging a complete embedded application. The board accepts Processor Plug-In Modules (PIM) designed for the Explorer 16 or Explorer 16/32 development board for easy device swapping. In addition to the hardware features provided by the board, hardware expansion is possible through the use of PICtail™ Plus daughter cards and mikroBUS™ accessory boards. Coupled with the integrated PICkit™-On-Board (PKOB), MPLAB ICD 3 In-Circuit Debugger or MPLAB REAL ICE™ real-time emulation and debug facilities enable faster evaluation and prototyping of application.
The development kit comes with Explorer 16/32 main development board, PIC24FJ1024GB610 PIM (MA240023), USB A to micro-B cable, and USB A to Type-C Cable.For out of the box experience, Explorer 16/32 Development Kit is the right choice that comes with all the necessary components to get started with the evaluation and prototyping right away!

Also read about Explorer 16/32 Development Board

Backwards Compatibility

Explorer 16/32 Development Board is completely backwards compatible with the Classic Explorer 16 Development Board (DM240001 and DM240002) and its associated ecosystem that include:
  • Process or Plug-In Modules (PIMs)
  • PICtail Plus Daughter Boards
  • Code Examples, Prototypes and Software Libraries developed on Classic Explorer 16 Development Board

Use all of existing codes, libraries, prototypes, PIMs and the PICtail Plus daughter cards interfaced via side PICtail Plus connector directly. Re-use the PICtail Plus daughter cards interfaced via vertical PICtail Plus connector using additional PICtail Plus Expansion Board (AC240100)

Getting Started
  • Read the Explorer 16/32 User’s Manual (available at Documentation & Software section of this page)
  • Download the free MPLAB X IDE
  • Download the suitable MPLAB XC Compiler
  • Download and unzip the appropriate firmware demo code (available at Documentation & Software section of this page)

Возможности:

    • 100 pin Plug-In Module (PIM) socket, supporting a wide variety of 16-bit and 32-bit PIC® MCUs and dsPIC® DSCs
    • Power supply
      • USB Power through PICkit™-On-Board (PKOB), USB Type-C™ or USB-Serial Converter
      • 9-15V DC Power Supply
    • On board USB to UART/I2C™ adapter for data exchange with PC/Mac/Linux based host
    • USB Type-C™ (host/device) and Type-A (host) support for applications using USB microcontroller
    • Hardware functionality extension by attaching accessory boards via
      • PICtail™ Plus interface
      • 2x MikroElektronika mikroBUS™ interface
      • 2x Digilent Pmod™ footprint
    • Alpha-numeric 16 x 2 LCD display, 8x User LEDs, 4x Push Buttons, 10k Potentiometer
    • Microchip's TC1047A high accuracy, analog output temperature sensor
    • Programmer/Debugger
      • Integrated USB programmer/debugger - PICkit™-On-Board (PKOB)
      • Interfaces to MPLAB ICD 3, MPLAB REAL ICE™, PICkit™ 3
    • Support for all the existing and new PICtail™ Plus Daughter Cards
      • Interface PICtail™ Plus Daughter Cards connected via sidePICtail™ Plus connector directly
      • Interface PICtail™ Plus Daughter Cards connected via vertical PICtail™ Plus connectorthrough additional accessory - PICtail™ Plus Expansion Board

Документация:
  • Даташит
  • Схемотехника
  • Програмное обеспечение
  • Тестирование
Описание:
The Explorer 16 Development Board is a low-cost modular development system for Microchip’s 16-bit and 32-bit microcontrollers. It supports devices from the PIC24, dsPIC and PIC32 families. A variety of families are supported with processor Plug-In Modules (PIMs) for easy device swapping. The board includes a PICtail Plus daughter card connector for expansion boards including USB, CAN, Ethernet, wireless, graphics and many more. Coupled with the MPLAB ICD 3 In Circuit Debugger or MPLAB REAL ICE, real-time emulation and debug facilities speed evaluation and prototyping of application circuitry.

Recommendation for Migration:
For 'New Designs' or advanced features requirement, migrate to refreshed and cost effective "Explorer 16/32 Development Board" with several new features. Offering backwards compatibility, the Explorer 16/32 development board facilitates seamless migration from Explorer 16 development board to the new platform.
For further details explore:

Возможности:

    • Includes processor PIMs for both 44 pin PIC24 and dsPIC families
    • Alpha-numeric 16 x 2 LCD display
    • Interfaces to MPLAB ICD 3, MPLAB REAL ICE and RS-232
    • Includes Microchip's TC1047A high accuracy, analog output temperature sensor
    • Expansion connector to access full devices pin-out and bread board prototyping area
    • PICTailTM Plus connector for expansion boards
    • Full documentation in download section below: user's guide, schematics

Документация:
  • Даташит
  • Схемотехника
  • Програмное обеспечение
  • Тестирование
Описание:
Microstick for 3V PIC24F K-series (Part #: DM240013-1) is a flexible USB powered development platform. It’s the perfect solution for those looking to get started with Microchip’s lowest cost 16-bit microcontroller families – PIC24F “KL” and “KA” – for extremely cost sensitive consumer, medical and industrial applications.

SUPPORTED PARTS:
Microstick for 3V PIC24F K-series supports the following 3V PIC24F “KL” and “KA” devices (28-pin SPDIP package only)
  • PIC24F16KL402 (included in package)
  • PIC24F16KA102 (included in package)
  • PIC24F08KL302
  • PIC24F08KL402
  • PIC24F08KA102
  • PIC24F16KA302
  • PIC24F32KA302
Возможности:

    • Low Cost
    • Compatible with Microchip’s popular 16-bit XLP Development Board (Part #: DM240311)
    • Integrated Programmer / Debugger – No External Debugger Required
    • USB Powered – Ease of Use, No External Power Supply Required
    • MPLAB IDE Support
    • DUT Socket – Flexible, Easy Device Swapping
    • Works Stand-alone or Plugged into a Prototyping Board
    • Easy Access to all Device Signals for Probing
    • Smaller than a Stick of Gum at 20mm x 69mm – Easily Portable
    • On Board User and Power LEDs
    • Reset Button
    • Demo Code

Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование
Описание:
Microstick for 5V PIC24F K-series (Part #: DM240013-2) is a flexible USB powered development platform. It’s the perfect solution for those looking to get started with Microchip’s low cost 16-bit microcontroller families – 5V PIC24FV “KM” and “KA” – for extremely cost sensitive consumer, medical and industrial applications.

SUPPORTED PARTS:
Microstick for 5V PIC24F K-series supports the following 5V PIC24FV “KM” and “KA” devices (28-pin SPDIP package only)
  • PIC24FV16KM202 (included in package)
  • PIC24FV08KM202
  • PIC24FV16KM102
  • PIC24FV08KM102
  • PIC24FV32KA302
  • PIC24FV16KA302
Возможности:

    • Low Cost
    • Integrated Programmer / Debugger – No External Debugger Required
    • USB Powered – Ease of Use, No External Power Supply Required
    • MPLAB IDE Support
    • DUT Socket – Flexible, Easy Device Swapping
    • Works Stand-alone or Plugged into a Prototyping Board
    • Easy Access to all Device Signals for Probing
    • Easily Portable
    • On Board User LED
    • Reset Button
    • Demo Code

Документация:
  • Програмное обеспечение
  • Тестирование
Описание:
The XLP 16-bit Development Board is designed with eXtreme Low Power in mind. Designed as a true platform for low power development, it enables designs with sleep currents as low as 20nA.

The board is suitable for prototyping many low power applications including RF sensors, data loggers, temperature sensors, electronic door locks, metering sensors, remote controls, security sensors, smart cards, and energy harvesting. The PICtail™ interface supports Microchip’s extensive line of daughter cards for easy evaluation of your next low power application.

This low cost board is the ideal complement to the MPLAB® PICkit 3 or ICD 3 debugger and programmer realizing a fully-featured, economical, PIC24 development environment.

Возможности:

    • PIC24F16KA102 (16KB Flash, 28-pins, XLP Device with 20nA Deep Sleep current )
    • Supports other PIC24F devices in 20 or 28-pins
    • Current measurement terminals allow device or board level current measurements (optional XLP Current Measurement Cable available)
    • PICtail ™ daughter board connector for connection to expansion boards such as RF, SD/MMC Cards, Speech Playback and more
    • mTouch™ capacitive sensing buttons for user input
    • Expansion connector accessing full device pin-out and breadboard prototype area
    • Convenient connections for MPLAB PICkit 3, ICD 3 or REAL ICE for in-circuit programming and debugging
    • USB interface for power and PC communication
    • 24AA256 Low Power (100nA Sleep, 1.7V Vdd) SPI serial-EEPROM
    • Crystal oscillators for main clock and Real-time Clock and Calendar
    • Potentiometer (connected to 10-bit A/D, analog input channel)
    • Analog output temperature sensor and CTMU based diode temperature sensor
    • LEDs for indication
    • Optional RS-232 port (not populated)
    • Power Options: AAA, CR2032, Energy Harvesting, USB, External, or 9V power supply

Документация:
  • Даташит
  • Схемотехника
  • Тестирование
Описание:
The PIC24FJ256DA210 Development Board is a low cost and efficient development board to evaluate the features and performance of the PIC24FJ256DA210 with integrated graphics, mTouch™ and USB. This board is an ideal platform for developing graphical human interface applications.

The development board requires a display board to complete the 2-board setup. It has a Microchip display connector V1, and allows developers to match with any of the listed 3.2”, 4.3” TFT display, or the graphics prototype board available by Microchip.

  • 3.2” 320x240 Truly TFT Display Board (AC164127-4)
  • 4.3” 480x272 Powertip TFT Display Board (AC164127-6)
  • Display Prototype Board (AC164139)
The development board also provides a complete interface to MPLAB ICD-3, MPLAB REAL ICE, and MPLAB PICkit-3 Emulator and Debugger.

Microchip also offers the PIC24FJ256DA210 development kit (DV164039) option which includes the board, 3.2” TFT Sisplay, Graphics Display Prototype Board, and MPLAB ICD-3 Emulator and Debugger.
Возможности:

    • PIC24FJ256DA210 16-bit microcontroller
    • Capacitive touch pads and switches
    • Microchip display connector V1
    • USB connectors (embedded host/device/OTG)
    • PICtail™ Plus Modular expansion slot
    • RS-232 serial port and associated hardware
    • Debug connectors supporting MPLAB ICD-3, MPLAB REAL ICE and MPLAB PICkit-3

Документация:
  • Даташит
  • Тестирование
Описание:
The LCD Explorer Development Board supports Microchip’s 100-pin Microcontrollers with x8 common Segment LCD Drivers. The LCD Explorer provides an ideal platform for a customer to evaluate a MCU with a x8 Common LCD Driver on a 38 segment x 8 common LCD display. PICtail Plus connections allow a customer to evaluate the selected MCU in a complex system by adding Microchip’s PICtail Plus daughter boards.


Возможности:

    Supports all 100-pin LCD Processor Plug-In Modules (PIM)
    - Includes 100-pin PIC24FJ128GA310 LCD PIM

    96 Segment 37 Segment x 8 Common LCD Glass
    Support 1/3 Biasing with:
    - External resistor ladder
    - Internal resistor ladder
    - Charge pump biasing with capacitor

    4 Buttons and 1 mTouch Capacitive Button
    Analog potentiometer and temperature sensor
    Power input from 9V power supply, battery or USB power source
    Separate Vbat battery supply
    Single UART communication channel via USB bridge
    RJ11 and 6 pin PICkit™ 3 programming and debug connectors
    PICtail™ Plus Vertical and Horizontal connections
    - All Pins populated with many used for other functions on board
    - Upper slot is open for use by end user

Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование
Описание:
RF based Remote Controls are becoming more prevalent as they enable non line-of-sight and provide bi-directional communication. A high-end remote control typically has a graphics display, a number of keys and a radio to communicate with the target devices.

Microchip’s Remote Control Demo Board (Part # DM240315-2) integrates Graphics, mTouch, USB and RF4CE into a single demo. The board demonstrates a remote populated with PIC24FJ256DA210 MCU, 3.5" Graphical TFT LCD with resistive touch screen, capacitive touch keys with plastic overlay, MRF24J40 2.4 GHz transceiver and ZENATM wireless Adapter.

The Remote Control Demo board offers the complete software and hardware including:
  • Bill of Materials
  • Schematics
  • Reference Code
Возможности:

    • Integrates Graphics, mTouch, USB and RF4CE
    • Stylish and Modern User Interface with colorful 3.5” QVGA graphical display, resistive touch screen and mTouch keys
    • Low cost Graphics and high integration with PIC24F “DA” family
    • Simple hardware layout
    • MRF24J40MA - A 2.4 GHz IEEE 802.15.4 radio transceiver
    • ZENATM wireless Adapter
    • Wireless Remote Control Utility that runs on the target computer

Документация:
  • Програмное обеспечение
  • Тестирование
Описание:
The PIC32 Starter Kit provides the easiest and lowest cost method to experience the PIC32 microcontroller for the first time. From the over 35 source code examples to the getting started project, users quickly learn Microchip's 32-bit family of microcontrollers and development tools. The kit includes everything needed to write, program, debug, and execute code on a high performance PIC32 microcontroller.
Возможности:

    Write Code
    • Free MPLAB IDE X
    • Free MPLAB XC32 Compiler
    • Example source code for projects and all peripherals
    Program Memory
    • Integrated programmer - all you need is the included USB Cable
    • Program and verify a full 512k image in under 9 seconds
    Debug
    • Integrated debugger - all you need is the included USB cable
    • Full source based debugging in MPLAB X IDE
    Execute Code
    • PIC32 running at MHz with 512K Flash, 32K RAM, 4 ch. DMA · USB powered board
    • 3 user switches and 3 LEDs
    Customize
    • Expansion connector enables addition of Microchip expansion board or create your own
    • Majority of MCU signals are present on the connector [Hirose: FX10A-120P/12-SV1(71)]

Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование
Описание:
The PIC32 USB Starter Kit II provides the easiest and lowest cost method to experience the USB and CAN functionality of the PIC32 microcontrollers. The board contains an on-board programming/debugger, standard A USB and micro A/B connectors, and an expansion header compatible with the PIC32 Starter Kit and expansion board such as I/O Expansion Board (DM320002) or for prototyping your own. Users can develop CAN applications using I/O expansion board (DM320002). The board contains everything needed to develop USB embedded host/device/OTG applications by combining this board with Microchip's free USB software.

The USB Starter Kit II has the same form factor and expansion connector as other PIC32 Starter Kits.
Возможности:

    DEVELOP. PROGRAM. RUN.

    Write Code

    • Free MPLAB IDE v8.41 or newer
    • Free MPLAB C32 C Compiler with no code size limit
    • Example project files for HID-class device mode, MSD-class host mode (see note below), CDC-class device mode. Additional projects will be available in the future.

    Program Memory
    • Integrated programmer - all you need is the included USB Cable
    • Program and verify a full 512k image in under 9 seconds

    Debug

    • Integrated debugger - all you need is the included USB cable
    • Full C source based debugging in MPLAB IDE

    Execute Code
    • PIC32 running at 80 MHz with 512K Flash, 128K RAM, 8 ch. DMA + 4 ch. DMA dedicated to USB and CAN
    • USB powered board
    • USB connectors, user switches, and LEDs

    Customize
    • Expansion connector enables addition of Microchip's PIC32 expansion board or create your own
    • Majority of MCU signals are present on the connector [Hirose: FX10A-120P/12-SV1(71)]

Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование
Возможности:

    • PIC32MX450/470 MCU
    • Integrated debugger/programmer
    • USB host, Device, Dual Role & OTG
    • Online tools & software download
    • Support for Windows XP and Windows Vista (32- & 64-bit)

Документация:
  • Даташит
  • Тестирование
Возможности:

    Write Code
    • Free MPLAB IDE v8.43 or newer
    • Free MPLAB C Compiler for PIC32 with no code size limit
    • Example project files for Ethernet and USB applications
    Program Memory
    • Integrated programmer - all you need is the included USB Cable
    • Program and verify a full 512k image in less than 9 seconds
    Debug
    • Integrated debugger - all you need is the included USB cable
    • Full C source-based debugging in MPLAB IDE
    Execute Code
    • PIC32 running at 80 MHz with 512K Flash, 128K RAM, 8 ch. DMA + 8 ch. DMA dedicated to Ethernet, CAN and USB
    • USB powered board
    • USB and Ethernet connectors, user switches, and LEDs
    Customize
    • Expansion connector enables addition of Microchip's PIC32 expansion boards or create your own
    • Majority of MCU signals are present on the connector [Hirose: FX10A-120P/12-SV1(71)]




Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование
Описание:
The PIC32 Ethernet Starter Kit II provides the easiest and lowest-cost method to experience 10/100 Ethernet development with PIC32 microcontrollers. Combined with Microchip’s free TCP/IP software, this kit gets your project running quickly. The PIC32 microcontroller has an available CAN 2 0b peripheral and USB host/device/OTG. This starter kit features a socket that can accommodate various 10/100 Ethernet transceiver (RJ-45) PHY Daughter Boards for prototyping and development.

Ethernet PHY Daughter Boards compatible withPIC32 EthernetStarter Kit II are listed below
LAN8720A PHY Daughter Board (AC320004-3)
LAN9303 PHY Switch Daughter Board (AC320004-4)

FOR DEMONSTRATION SOFTWARE, PLEASE VISIT MPLAB HARMONY SOFTWARE FRAMEWORK

Возможности:

    • USB-powered board
    • Includes 10/100 Fast Ethernet LAN8740 PHY Daughter Board
      • Features Energy efficient Ethernet(IEEE 802.3az) and Wake-On-LAN functionality
    • USB and Ethernet connectors, user switches and LEDs
    • Integrated programmer/debugger
    • Standard A to mini-B cable for debugger
    • Standard A to micro-B cable for USB application development
    • PIC32 running at 80 MHz with 512K Flash, 128K RAM, 8 channel DMA + 8 channel DMA dedicated to Ethernet, CAN and USB
    • Expansion connector enables the addition of Microchip’s PIC32 expansion boards or the creation of your own board

Документация:
  • Даташит
  • Тестирование
Описание:
The PIC32MZ EC Starter Kit provides the easiest and lowest cost method to experience the high performance and advanced peripherals integrated in the PIC32MZ Embedded Connectivity MCUs. This starter kit features a socket that can accommodate various 10/100 Ethernet transceiver (RJ-45) plug-in connectors for prototyping and development.

Ethernet PHY Daughter Boards compatible with PIC32MZ EC Starter Kitare listed below
LAN8720A PHY Daughter Board (AC320004-3)
LAN9303 PHY Switch Daughter Board (AC320004-4)

FOR DEMONSTRATION SOFTWARE, PLEASE VISIT MPLAB HARMONY SOFTWARE FRAMEWORK

This starter kit can also be used with Multimedia Expansion Board II

To get started quickly, refer the PIC32MZ EC Starter Kit Info Sheet in the documentation section below.
Возможности:

    • On-board PIC32MZ2048ECH144: 200 MHz, 2 MB Flash and 512 KB RAM
    • Includes 10/100 Fast Ethernet LAN8740 PHY Daughter Board
      • Features Energy Efficient Ethernet (IEEE 802.3az) and Wake-On-LAN functionality
    • Integrated debugger/programmer
    • USB powered
    • 10/100 Ethernet
    • CAN 2.0b, HI-Speed USB 2.0 host/device/dual-role/OTG
    • 4 MB SQI Flash
    • Can be used with Multimedia Expansion Board II
    • Can be used with PIC32 Expansion Board using a PIC32MZ adaptor board.

Документация:
  • Даташит
  • Тестирование
Описание:
The PIC32MZ EC Starter Kit with Crypto Engine provides the easiest and lowest cost method to experience the high performance and advanced peripherals integrated in the PIC32MZ Embedded Connectivity MCUs. It features PIC32MZ2048ECM144 with onboard crypto engine that reduces software overhead of actions such as encryption, decryption, and authentication. This starter kit features a socket that can accommodate various 10/100 Ethernet transceiver (RJ-45) plug-in connectors for prototyping and development.

Ethernet PHY Daughter Boards compatible with PIC32MZ EC StarterKit w/ Crypto Engineare listed below
LAN8720A PHY Daughter Board (AC320004-3)
LAN9303 PHY Switch Daughter Board (AC320004-4)


FOR DEMONSTRATION SOFTWARE, PLEASE VISIT MPLAB HARMONY SOFTWARE FRAMEWORK

This starter kit can also be used with Multimedia Expansion Board II

To get started quickly, refer the PIC32MZ EC Starter Kit Info Sheet in the documentation section below:
Возможности:

    • On-board PIC32MZ2048ECM144 with 200 MHz, 2 MB Flash and 512 KB RAM with crypto engine
    • Includes 10/100 Fast Ethernet LAN8740 PHY Daughter Board
      • Features Energy Efficient Ethernet (IEEE 802.3az) and Wake-On-LAN functionality
    • Integrated debugger/programmer
    • USB powered
    • 10/100 Ethernet
    • CAN 2.0b, Hi-Speed USB 2.0 host/device/dual-role/OTG
    • 4 MB SQI Flash
    • Can be used with Multimedia Expansion Board II
    • Can be used with PIC32 Expansion Board using a PIC32MZ adaptor board.

Документация:
  • Даташит
  • Тестирование
Описание:
The PIC32MZ Embedded Connectivity with Floating Point Unit (EF) Family Starter
Kit (DM320007 for non-Crypto development or DM320007-C for Crypto
development) provides a low-cost method for the development and testing of USB
and Ethernet-based applications with PIC32MZ EF family devices.

Ethernet PHY Daughter Boards compatible with PIC32MZ EF Starter Kit are listed below
LAN8720A PHY Daughter Board (AC320004-3)
LAN9303 PHY Switch Daughter Board (AC320004-4)

FOR DEMONSTRATION SOFTWARE and Board Support Packages, PLEASE VISIT MPLAB HARMONY SOFTWARE FRAMEWORK

This starter kit can also be used with Multimedia Expansion Board II
Возможности:

    The board features two Mini-B USB ports, one for debugging and one for USB-toUART
    or I2C™ communications, a Standard-A USB port for the embedded host,
    and a Micro-AB USB Host/Device/OTG port. The PHY daughter board features an
    RJ-45 Ethernet port for network connectivity.

Документация:
  • Тестирование
Описание:
The PIC32MZ Embedded Connectivity with Floating Point Unit (EF) Family Starter
Kit (DM320007 for non-Crypto development or DM320007-C for Crypto
development) provides a low-cost method for the development and testing of USB
and Ethernet-based applications with PIC32MZ EF family devices.

Ethernet PHY Daughter Boards compatible with PIC32MZ EF Starter Kit are listed below
LAN8720A PHY Daughter Board (AC320004-3)
LAN9303 PHY Switch Daughter Board (AC320004-4)

FOR DEMONSTRATION SOFTWARE and Board Support Packages, PLEASE VISIT MPLAB HARMONY SOFTWARE FRAMEWORK

This starter kit can also be used with Multimedia Expansion Board II
Возможности:

    The board features two Mini-B USB ports, one for debugging and one for USB-toUART
    or I2C™ communications, a Standard-A USB port for the embedded host,
    and a Micro-AB USB Host/Device/OTG port. The PHY daughter board features an
    RJ-45 Ethernet port for network connectivity.

Документация:
  • Тестирование
Описание:
The audio development board for PIC32 (DM320011) provides developers a flexible platform for 24-bit audio record and playback, USB Digital Audio, MP3 Decode and Sample Rate Conversion.

The audio board can be easily connected through the MFi dock edge connector to the accessory development platform for iPod and iPhone enabling users to develop applications for iPod and iPhone.
Возможности:

    • On-board PIC32MX795F512 with 80 MIPS of performance, 512KB Flash and 128KB of RAM
    • 24-bit Wolfson CODEC
    • USB Type A interface
    • On-board Microphone
    • Headphone out and Line in
    • High quality 2” Color LCD
    • Pre-loaded demo code
    • MFi Dock Edge Connector

Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование
Описание:
The PIC32 USB Digital Audio Accessory Board showcases a 16/24-bit quality digital stereo audio development platform using the PIC32 microcontroller (MCU). It can be used for 16/24-bit stereo audio playback and recording with a sample rate of up to 48 kHz. This accessory board is powered by the USB Host and can be used with any personal computer (PC), tablet, gaming station, or mobile device that supports the USB Audio Device Class. The digital audio stream is transferred over USB isochronous transfers. The PIC32 USB Digital Audio Accessory Board features the PIC32 MCU, which has a USB module with Host and Device capability, SPI module with Audio Mode that supports I2S, LJ, RJ, DSP/PCM modes, and a flexible audio reference clock output generation module that can be used as time base for the external codec or Digital-to-Analog Converter (DAC).
Возможности:

    • PIC32MX250F128B MCU: 128 KB of program memory and 32 KB of RAM
    • PIC32 I2S support (LJ, RJ, DSP/PCM modes supported) – all modes can be 16/24-bit
    • PIC32 reference clock output for codec master clock
    • Audio codec (AK4645A) with up to 48 kHz sampling rate and 16/24-bit resolution
    • Supported codec-based audio processing features:
      • 5-band equalizer
      • Analog output mixing
      • Stereo separation emphasis and wind-noise filtering
      • Auto-level control

Документация:
  • Програмное обеспечение
  • Тестирование
Описание:
The PIC32 GUI Development Board with Projected Capacitive Touch enables development of cost effective multi touch graphical user interfaces. It is based on PIC32MX795F512 with 105 DMIPS performance, 512KB Flash and 128KB RAM. The PIC32 is coupled with a low cost PSRAM as a high speed graphics frame buffering and a 4.3” WQVGA touch display enabling development of graphics solutions without an external graphics controller. Additionally the board provides USB host and device connectivity and supports I/O connections via through-hole pads for custom board attachment. Multi touch user input is supported by Microchip’s Turnkey Projected Capacitive Touch Controller, MTCH6301. The board is a standalone development platform that can be programmed/debugged via the on board 5-pin In-Circuit Serial Programmer interface designed for Microchip’s PICkit3 In-Circuit Debugger.
Возможности:

    • Based on PIC32MX795F512 device with 512KB Flash and 128KB RAM
    • Projected capacitive touch device MTCH6301
    • WQVGA 4.3” display
    • USB port for Device or Host functionality
    • Expansion header
      • Access to PIC32 I/O’s and peripherals

Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование
Описание:
The PIC32 Bluetooth Starter Kit is a low-cost Bluetooth development platform featuring the PIC32MX270F256D MCU. This kit features a HCI-based Bluetooth radio, pushbuttons, Cree high-output multi-color LED, standard single-color LEDs, accelerometer, temperature sensor and GPIO for rapid development of Bluetooth Serial Port Profile (SPP), USB and General Purpose applications.

The Starter kit offers an Android App, Demo code and Bluetooth Serial Port Profile stack for free to get you started.
The PIC32 MCU on the Starter kit executes Microchips’ Free Bluetooth SPP stack & Demo Code to perform full-duplex data transmission over the Bluetooth link to showcase:
• Color Mixing of Cree High Output Multi Color LED
• Temperature Display

Daughter cards compatible with PIC32 Bluetooth Starter Kit :
PIC32 Audio Codec Daughter Card - AK4642EN (AC320100)
PIC32 Audio DAC Daughter Board - AK4384VT (AC320032-2)


For more information on the demonstration of the PIC32 Bluetooth Starter Kit please click on the video below
PIC32 Bluetooth Starter Kit Demonstration Video

To get started quickly, download “PIC32 Bluetooth Starter Kit Quick Start Package” from the Documents below.

FOR SOURCE CODE on the Demo and Android Application please seethe Software Development Kit (SDK) located in the
<install-dir>/apps/bluetooth/data_temp_sens_rgb folder within your installation
of MPLAB® Harmony, which includes embedded source, Android source, and the Bluetooth
binary library and also the Board Support Package (BSPs).

The Android App is also available on the Google play
PIC32 BTSK Android App on Google play
Возможности:

    • PIC32MX270F256D for Central Processing
    • Bluetooth HCI module
    • Cree high output multi-color LED
    • Integrated 3-axis accelerometer and temperature sensor
    • 3 standard single color LEDs for display
    • 5 Push Buttons for user defined inputs
    • On Board Debugging

Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование
Описание:
The PIC32MX1/2/5 Starter Kit provides the user with an easy and cost effective option to experience the USB and CAN functionality of the new PIC32MX1/2/5 family of microcontrollers. The board features a 50MHz/83DMIPS PIC32MX570F512L MCU with 512 KB Flash, 64KB RAM, USB Device/Host/OTG, CAN 2.0B, 48 Channel ADC, Analog Comparators, SPI Ports and UARTs. The starter kit has an onboard high-speed CAN transceiver which serves as an interface between a CAN protocol controller and the physical two wire bus. It also comes equipped with an onboard DB9 connector to interface with the CAN2.0B based applications.

For Demonstration Software and Board Support Packages, Please Visit http://www.microchip.com/harmony
Возможности:

    • PIC32MX570F512L MCU: 50MHz, 512 KB Flash/64 KB RAM
    • MCP2562: A High-Speed CAN Transceiver
    • DB9 Connector for CAN2.0B applications
    • USB receptacles for USB development
    • Expansion Connector to interface to PIC32 expansion boards
    • User definable LEDs & push buttons
    • Integrated Programmer/Debugger

Документация:
  • Даташит
  • Тестирование
Описание:
The Curiosity PIC32 MZ EF Development Board is a fully integrated 32-bit development platform featuring the high performance PIC32MZ EF Series (PIC32MZ2048EFM) that has a 2MB Flash, 512KB RAM, integrated FPU, Crypto accelerator and excellent connectivity options.

The Curiosity Development Board includes an integrated programmer/debugger ,an on board Wi-Fi-N module MRF24WN0MA-I/RM100 and is fully integrated with Microchip’s MPLAB® X IDE.

Each board provides two MikroBus® expansion sockets from MicroElektronika and a Microchip X32 header to enable customers seeking accelerated application prototype development. Boards are fully integrated into PIC32’s powerful software framework, MPLAB ® Harmony that a provides flexible and modular interface to application development , a rich set of inter-operable software stack (TCP-IP,USB) and easy to use features.

X32 Boards compatible with Curiosity Board are :
PIC32 Audio Codec Daughter Card - AK4642EN (AC320100)
PIC32 Audio DAC Daughter Board - AK4384VT (AC320032-2)

The boards and ecosystem have been designed to provide an excellent out of the box experience. Customers would be able to download and run example applications /projects instantly on the boards without the need to install the entire ecosystem. The demos have been developed to showcase PIC32 MCU features and application development ecosystem.

The board offers expansion capabilities making it an excellent choice for a rapid prototyping board in Connectivity, IOT and general purpose applications.
Возможности:

    1. PIC32MZ2048EFM100 32-bit microcontroller with 2MB Flash, 512KB RAM, integrated FPU ,Crypto accelerator and excellent connectivity options.

    2. X32 header for audio I/O using Microchip audio daughter boards
    PIC32 Audio Codec Daughter Card - AK4642EN (AC320100)
    PIC32 Audio DAC Daughter Board - AK4384VT (AC320032-2)

    3.On Board WI-FI N Module, MRF24WN0MA, 2.4 GHz IEEE 802.11n compliant wireless module

    4. Header for flexible Ethernet PHY
    Compatible with ETHERNET PHY DAUGHTER BOARD AC320004-3
    The Microchip LAN8720A PHY Daughter Board is populated with a small footprint RMII10/100 Ethernet transceiver (LAN8720A).

    5. GPIO expansion header

    6. Debug USB connector for programming/debugging

    7. Target USB connector for PIC32 USB connectivity (Device/Host mode).

    8. Two mikroBUS click sockets to expand functionality using MikroElektronika ClickAdapter Boards

    9.Header for external 5V input .

    10. On-Board Debugger.

    11. ICSP header for external debugger, such as MPLAB® REAL ICE™ or MPLABICD 3

    12. Three user LEDs , One RGB LED.

    13. One User and Reset Button.

Документация:
  • Даташит
  • Тестирование
Описание:
The Microchip PIC32 Accessory Development Start Kit for Android™ is used for evaluating and developing accessories for Google’s Android operating system for smartphones and tablets.
Возможности:

    PIC32 PIC® MCU with USB OTG
  • Type A USB connector and micro A/B/ connectors
  • I/O expansion board
  • On-board programming/debugging

Документация:
  • Тестирование
Описание:
The dsPIC33E USB Starter Kit provides a low cost method for the development and testing of USB OTG, Host and Device applications on the 60 MIPS dsPIC33E DSC family. The board contains an on-board programming/debugger, standard A USB and micro A/B connectors, three user-programmable LEDs, three push button switches and an expansion header compatible with the Multimedia Expansion Board (DM320005) and I/O Expansion Board (DM320002). The starter kit comes preloaded with basic Communication Device Class (CDC) demonstration software.

Programming, Running and Debugging Applications

Use the following procedure for programming/debugging your application programs (the dsPIC33E Start Kit CDC USB Device Demo software available from the link below is mentioned here as an example):

  • Using MPLAB IDE, open the project C:\dsPIC33E PIC24E USB Starter Kit Demo\Firmware\ USB Device - CDC - Basic Demo - dsPIC33E USB Starter Kit.mcp. (This assumes that the demo was installed in the default location)
  • Connect the starter kit to your PC using the provided USB mini-B to full-sized A cable. Note that the jumper in J5 should not be installed.
  • Choose “Starter Kit On Board” as the debugger tool in MPLAB IDE by selecting Debugger > Select Tool> Starter Kit On Board.
  • Choose the debug build configuration by selecting Project > Build Configuration > Debug.
  • Build the project by selecting Project > Build All.
  • Download the code into the starter kit by selecting Debugger > Program.
  • Run the downloaded application software by selecting Debugger > Run. At this time LED2 on the starter kit should turn on.
  • This demo allows the Starter Kit to appear as a serial (COM) port to the host. The instructions for this demo can be found at C:\dsPIC33E PIC24E USB Starter Kit Demo\Documentation\Getting Started\Getting Started - Running the Device - CDC - Basic Demo. See the Running the Demo section.

Возможности:

    • On-board programming/debugger
    • Standard A USB and micro A/B connectors
    • Three user-programmable LEDs
    • Three push button switches

Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование
Описание:
The Microstick for dsPIC33F and PIC24H devices is designed to provide designers with an easy to use, economical development environment for 16-bit dsPIC® Digital Signal Controllers and PIC® Microcontrollers.

Microstick provides all you need to get started at a very low cost. It has an integrated programmer / debugger. It can be used stand-alone or plugged into a prototyping board for extremely flexible development. The device under test is socketed for easy change-out, and Microchip’s MPLAB® Integrated Development Environment supports Microstick. It has never been more affordable to get started with Microchip 16-bit devices!

Supported Parts:
dsPIC33FJ64MC802
dsPIC33FJ128MC802
PIC24HJ64GP502
PIC24HJ128GP502
Возможности:

    • Low Cost 16-bit board – Priced at $24.99 at Microchip Direct
    • Integrated USB programmer / debugger – No external debugger required
    • USB Powered – Ease of use, No external power required
    • Socketed dsPIC/PIC24 – Flexible, Easy device replacement
    • 0.025” Pin headers – Enables plug-in to Breadboard with room for jumper wires
    • Easy access to all device signals for probing
    • Small size - Smaller than a stick of gum at 20 x76mm – Easily Portable
    • On board debug LED, Utility LED and Reset Switch
    • Free demo code

Документация:
  • Даташит
  • Тестирование
Описание:
Microstick II delivers a complete development hardware platform for Microchip’s 16-bit and 32-bit microcontrollers and digital signal controllers. It’s the perfect solution to those looking for a low-cost, easy-to-use development platform. (Note: Go to Microstick for dsPIC33F and PIC24H Development Board for information on the Microstick tool.)

The USB-powered kit includes an on-board debugger/programmer, a DUT socket for easy device swapping, a user LED and reset button. It is designed for insertion into a standard prototyping board for easy connection to additional circuitry. The kit is extremely portable as well and is still about the size of a stick of gum!

Supported Parts:
Microstick II supports 3.3V PIC24FJ, PIC24E, PIC24H, dsPIC33, and PIC32 28-pin SPDIP packaged devices shown in the table to the right (see images).
Возможности:

    • Low Cost
    • Integrated USB programmer / debugger – No external debugger required
    • USB Powered – Ease of use, No external power required
    • MPLAB support.
    • DUT Socket – Flexible, Easy device replacement
    • 0.025” Pin headers – Enables plug-in to Breadboard with room for jumper wires
    • Easy access to all device signals for probing
    • Small size - Smaller than a stick of gum at 20 x76mm – Easily Portable
    • On board User LED and Reset Switch
    • Free demo code

Документация:
  • Даташит
  • Тестирование
Описание:
LED lighting designers are being challenged to meet the rapidly expanding demand for green, smart energy technologies while differentiating their products. Microchip’s Digital LED Lighting Development Kit (DM330014) enables designers to quickly leverage the capabilities and performance of the dsPIC33 ‘GS’ series of Digital Signal Controllers (DSCs), to develop LED lighting products. The dsPIC33 ‘GS’ DSC and this reference design allow developers to create a 100% digitally controlled ballast function, while including advanced features such as dimming and color hue control. The dsPIC33 ‘GS’ DSCs can support an entire system implementation for LED lighting products, including power-conversion circuits, such as AC-to-DC and DC-to-DC conversion, along with functions such as Power Factor Correction (PFC), which are necessary for a complete product and lower the overall system cost.

Benefits offered by the digital-power techniques in this reference design and the dsPIC33 ‘GS’ series of DSCs include:

  • Reduced System Cost via higher integration
  • Higher Efficiency using digital-control techniques
  • Flexible and reusable designs
  • Advanced features implemented in software
Возможности:

    Key features of Microchip’s Digital LED Lighting Development Kit include:

    • Color control for RGB LEDs
    • Supports DMX512 Standard for brightness control
    • Flexible input voltage support, including both Buck and Boost topologies
    • Fully dimmable
    • Full digital control
    • Fault protection
    • Fully controlled with a single dsPIC33FJ16GS504 DSC.

Документация:
  • Тестирование
Описание:
The MPLAB Starter Kit for Digital Powerkit uses the dsPIC33EP64GS502 DSC to implement a buck converter and a boost converter. It is a digitally controlled power supply board that consists of one independent DC/DC synchronous Buck converter and one independent DC/DC Boost converter.Each convertercan drive its on-board MOSFETcontrolled resistive load or an external load. The board hasan LCD display for voltage, current, temperature and faultconditions, and an integrated programmer/debugger, allpowered by the included 9 V power supply.



Возможности:

    • dsPIC33EP64GS502 – Low-cost 16-bit digital power conversion DSC
    • One independent DC/DC synchronous Buck converter
    • One independent DC/DC Boost converter.
    • LCD display for voltage, current, temperature and fault conditions
    • On-board In-Circuit Debugger /Programmer via USB
    • On-board programmable resistive loads of up to 3W (0.5W, 1.25W, 1.25W)
    • Hardware slope compensation for peak current mode implementations
    • On-board temperature sensor
    • Compact Design – 4” x 2.5” board
    • Powered via 9V power supply (included)

Документация:
  • Даташит
  • Тестирование
Описание:
The dsPIC33EV 5V CAN-LIN starter Kit features thedsPIC33EV256GM106 Digital Signal Controller (DSC) for automotive and motorcontrol applications. The Starter Kit contains serial data ports for CAN, LIN and SENT, a self-contained USB programming/debug interface, and an expansion footprint forflexibility in application hardware development.This board allowsusers to explore three popular automotive and industrial serial data formats (CAN, LINand SENT).The PICkit On-Board (PKOB) USB programmer anddebugger allows simple programming without the need for an additional hardwareinterface. No other external tools are required to program the device.
Возможности:

    • Features dsPIC33EV256GM106 microcontroller
    • PICkit On-Board (PKOB) USB programmer and debugger
    • CAN, LIN & SENT Inferfaces
    • USB Powered

Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование
Описание:
The dsPICDEM™ MCLV-2 Development Board provides a cost-effective method of evaluating and developing sensored or sensorless Brushless DC (BLDC) and permanent magnet synchronous motor control applications. The board supports Microchip’s 100-pin Plug-In-Modules with dsPIC33E or dsPIC33F Digital Signal Controllers. The board supports the use of the internal, on chip OpAmps found on certain dsPIC® devices or the external OpAmps found on the MCLV-2 board. A dsPIC33EP256MC506 Internal OpAmp PIM (MA330031) is included. The board is capable of controlling motors rated up to 48V and 15A, with multiple communication channels such as USB, CAN, LIN and RS-232.

The dsPICDEM™ MCLV-2 Development Board is targeted to control a Brushless DC (BLDC) motor or Permanent Magnet Synchronous Motor (PMSM) in sensor or sensorless operation. This flexible and cost-effective board can be configured in different ways for use with Microchip’s specialized motor control digital signal controllers. The dsPICDEM™ MCLV-2 Development Board supports the dsPIC33E or dsPIC33F motor control device family. It offers a mounting option to connect a generic 100-pin Plug-In Module (PIM).

The MCLV-2(DM330021-2) replaces the previous MCLV (DM330021) and is fully backwards compatible with the previous MCLV(DM330021) and all motor control PIMs
Возможности:

    Motor Control Interfaces:
    • Three-phase inverter bridge with a power rating of 48V/15A
    • Ability to use internal OpAmps found on certain dsPIC33E devices or external OpAmps on the MCLV-2 board for current sensing
    • Hall sensors/quadrature encoder interface for sensored motor control
    • Phase voltage feedback for sensorless BLDC operation
    • DC bus current sense resistor for single shunt vector control
    • Phase current sense resistor for dual shunt vector control
    • Overcurrent protection
    • Input/output control switches
    • Potentiometer
    • LED indicator for PWM outputs

    Power Supply Connectors:
    • Auxiliary power tab “fast-on” connectors for the controller and power stage
    • 24V power input connector for the controller
    • Dedicated power input connector for the power stage

    Communication Interfaces:

    • CAN interface port
    • LIN interface port
    • UART communication via USB
    • UART communication via RS-232


    Programming Interfaces
    :

    • ICSP™ connector for programming a dsPIC® DSC device
    • RJ11 connector for programming a dsPIC® DSC device
    • ICSP™ connector for programming the PIC18LF2450 USB to UART bridge

    Full Backwards Compatibility with MCLV

Документация:
  • Даташит
  • Тестирование
Описание:
The Microchip dsPICDEM™ MCSM Development Board is targeted to control both unipolar and bipolar stepper motors in open-loop or closed-loop (current control) mode. The hardware is designed in such a way that no hardware changes are necessary for 8-, 6- or 4-wire stepper motors in either bipolar or unipolar configurations. Software to run motors in open-loop or closed-loop with full or variable micro-stepping is provided. A GUI for controlling step commands, motor parameter input, and operation modes is included. This flexible and cost-effective board can be configured in different ways for use with Microchip’s specialized dsPIC33F Motor Control Digital Signal Controllers (DSCs). The dsPICDEM MCSM Development Board offers a mounting option to connect either a 28-pin SOIC device or a generic 100-pin Plug-In Module (PIM). A dsPIC33FJ32MC204 DSC PIM (MA330017) is included.

The dsPICDEM MCSM Development Board supports terminal voltages up to 80V and currents up to 3A. The dsPIC33F device uses the MOSFET driver to drive the two full-bridge inverters that power the motor windings. The board includes various circuitries to perform the following functions:

  • Drive two motor windings with the two on-board full-bridge inverters
  • Measure feedback and other analog signals (i.e., current, DC voltage, Potentiometer and Fault signals)
  • Communicate with a host computer or an external device via USB
The dsPIC DSC devices feature an 8-channel, high-speed PWM with Complementary mode output, a programmable ADC trigger on the PWM reload cycle, digital dead time control, internal shoot-through protection and hardware fault shutdown. These features make the dsPIC DSC an ideal solution for high-performance stepper motor control applications where control of the full-bridge inverter is required.

The MCSM Development Board is available in two configurations:
  • dsPICDEM MCSM Development Board : DM330022
  • dsPICDEM MCSM Development Board Kit : DV330021
Возможности:

    Motor control interfaces:
  • Two full-bridge inverters
  • Two phase current sense resistors
  • DC bus voltage sense resistor
  • Over-current protection

    Built-in power supplies:
  • 15V power supply, maximum power available 11 W
  • 3.3V power supply, maximum power available 2 W

    Power supply connectors:
  • 24V power input connector (J6) for the controller and power stage
  • Auxiliary Power Tab Fast-On connectors (BP1 and BP2) for the power stage
    Motor control device (U2) socket:
  • The dsPIC33FJ12MC202 Motor Control device in SOIC package (U3) footprint

    User Interfaces:
  • One push button (S1)
  • Reset push button (RESET)
  • 10K Ohm Potentiometer (POT)
  • LED indicators for PWM outputs arranged in a full-bridge format
  • LED indicator for over current

    Communication Ports:
  • UART communication via USB (J4)

    Programming Connectors:
  • ICSP™ connector for programming a dsPIC DSC device (J2)
  • RJ11 connector for programming a dsPIC DSC device (J1)
  • ICSP connector for programming the PIC18LF2450 USB-to-UART Bridge (J3)

Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование
Описание:
The Microchip dsPICDEM™ MCHV-2 Development System is intended to aid the user in the rapid evaluation and development of a wide variety of motor control applications using a dsPIC® Digital Signal Controller (DSC). This development system is targeted to control Brushless DC (BLDC) motors, Permanent Magnet Synchronous Motors (PMSM), and AC Induction Motors (ACIM) in sensor or sensorless operation. This flexible and cost-effective tool can be configured in different ways for use with Microchip’s specialized motor control DSCs. The dsPICDEM™ MCHV-2 Development System supports the dsPIC33F and dsPIC33E Motor Control device family and offers a mounting option to connect either a 28-pin SOIC device or a generic 100-pin Plug-In Module (PIM). The system has a three-phase power module device that contains the motor inverter and the gate driver’s circuitry. The circuit drives a BLDC, PMSM, or ACIM motor using different control techniques without requiring any additional hardware. The MCHV-2 supports using either the internal opamps found on certain dsPIC33E products or the external opamps found on the MCHV-2 board for current sensing. It also has Power Factor Correction (PFC) circuitry to meet power regulatory requirements.

The rated continuous output current from the inverter is 6.5A (RMS). This allows up to approximately 2 kVA output when running from a 208V to 230V single-phase input voltage in a maximum 30ºC (85ºF) ambient temperature environment. Therefore, the system is ideally suited for running a standard 3-Phase Induction Motor of up to 1.4 kW (1.8 HP) rating or a slightly higher rated industrial servo-motor. The power module is capable of driving other types of motors and electrical loads that do not exceed the maximum power limit and are predominantly inductive. Furthermore, single-phase loads can be driven using one or two of the inverter outputs. The unit is capable of operating from 90V up to a maximum of 265V.

The MCHV-2(DM330023-2) replaces the previous MCHV (DM330023) and is fully backwards compatible with the previous MCHV(DM330023) and all motor control PIMs.
Возможности:

    Power Factor Correction:
    • Maximum output: 1000W at 400V
    • Input voltage range: 85VAC - 265VAC
    • Current feedback circuitry and zero-crossing detection
    • VAC input voltage sensing
    • DC bus sensing and Over-current protection
    • Current sensing using either internal, on chip opamps or external opamps on the MCHV-2 board
    Built-In Power Supplies:
    • 15V power supply, maximum power available 11W
    • 3.3V power supply, maximum power available 2W
    Additional Protection Circuitry:
    • 250 VAC/15A fuse
    • In-rush current limiter
    • EMI filter

    Other Features:
    • Built-in Isolated Debugger / Programmer
    • Real time debug with DMCI integrated MPLAB®

    Motor Control Interfaces:
    • Three-phase inverter (IPM): 400V/6.5A
    • Hall sensors and Quadrature Encoder Interface (QEI)
    • Phase voltage feedback for sensorless BEMF operation
    • DC bus current sense resistor for single shunt resistor vector control
    • Phase current sense resistors for dual shunt resistor vector control
    • Over current protection
    Other Features:
    • Isolated Input/Output control switches
    • Compact design and royalty free software
    • LED Indicators for PWM outputs
    • dsPIC33EP256MC506 Internal Op-Amp PIM included (MA330031)
    • Isolated communication ports : USB and RS232
    • 28,44, and 100-pin dsPIC33F/E device support

Документация:
  • Даташит
  • Тестирование
Описание:
As an alternative to the Wi-Fi Comm Demo board, we suggest customers purchase the DV102412 for evaluating the MRF Wi-Fi series of modules.

The Wi-Fi Comm Demo board provides a compact development platform for customers to evaluate Microchip’s MRF24WB0MA Wi-Fi module. The demo board comes with onboard MRF24WB0MA Wi-Fi module which is FCC/IC/ETSI certified along with a PIC32 MCU.
Возможности:

    • WiFi solution compatible with IEEE 802.11 b/g/n Access Points
    • Supports Infrastructure and Ad hoc networks
    • MRF24WB0MA module is FCC, IC, Wi-Fi® certified and ETSI compliant
    • Powered by 2 AAA batteries
    • Supports WEP, WPA and WPA2 security protocols
    • The board has sensor I/O interface enabling application specific demos
    • The Wi-Fi Comm Demo Board offers the complete software and hardware including
      • Schematics
      • Reference source code

Документация:
  • Програмное обеспечение
  • Тестирование
Описание:
The PIC24FJ256DA210 Development Kit is a low cost and efficient development kit to evaluate the features and performance of the PIC24FJ256DA210 with integrated graphics, mTouch™ and USB.

This kit is an ideal platform for new graphical human interface developers. It bundles four major components and other accessories as listed below. For those who are not looking to purchase the kit with all the components, each can also be purchased separately.
  • PIC24FJ256DA210 Development Board (DM240312)
  • 3.2” Truly 240x320 TFT Display Board (AC164127-4)
  • Graphics Display Prototype Boards - 3x (AC164139)
  • MPLAB ICD-3 Emulator and Debugger with USB Cable (DV164035)
  • 9V Power Supply (AC162039)
  • USB A-miniB Cable
  • Serial Cable
Возможности:

    • PIC24FJ256DA210 16-bit microcontroller
    • Capacitive touch pads and switches
    • 3.2” Truly TFT Display with resistive touch screen support
    • Prototype graphics boards for prototyping LCD panels of choice
    • USB connectors (embedded host/device/OTG)
    • PICtail™ Plus Modular expansion slot
    • RS-232 serial port and associated hardware
    • MPLAB ICD-3 Emulator and Debugger
    • 9V Power Supply

Документация:
  • Даташит
  • Тестирование
Описание:
The PIC32 Bluetooth® Audio Development Kit provides a comprehensive solution to develop Bluetooth A2DP audio streaming solutions and applications. The board is coupled with two daughter cards: the Bluetooth HCI Radio Daughter Card that demonstrates a low cost Bluetooth implementation and the Audio DAC Daughter Card that demonstrates a high quality 16/24-bit, 32-192 KHz audio conversion/amplification for line or headphones. The kit ships with demo code that enables wireless streaming digital audio from any Bluetooth enabled Smartphone or portable music player or over USB.

Daughter cards compatible with PIC32 Bluetooth Audio Development Kit :
PIC32 Audio Codec Daughter Card - AK4642EN (AC320100)
PIC32 Audio DAC Daughter Board - AK4384VT (AC320032-2)

Plug-In Module compatible with PIC32 Bluetooth Audio Development Kit (Only Compatible with BLUE PIMs) :
PIC32MZ Audio 144pin - PIM for Bluetooth Audio Development Kit (MA320016)
PIC32MX270F256D PIM (MA320013)
PIC32MX270F512L PIM (MA320017)

Click here for information on PIC32 Bluetooth Audio Suites

Click on the below Bluetooth Software & Decode Library to purchase
AAC Decode Library Buy it now!
PIC32 Bluetooth Audio Software Suite 1 Buy it now!
PIC32 Bluetooth Audio Software Suite 2 Buy it now!

FOR DEMONSTRATION SOFTWARE and Board Support Packages, PLEASE VISIT MPLAB HARMONY SOFTWARE FRAMEWORK
Возможности:

    • PIC32MX450/470 MCU
    • HCI Bluetooth module Daughter Card (QDID Certified Module)
    • 16/24-bit, 32-192KHz DAC/Amp Daughter Card
    • USB Host/Device audio support
    • USB Charging
    • 2 inch color LCD Display
    • Headphone/Line Out
    • Audio Control function

    Bluetooth /USB Audio Software Support for:
    • Apple*
    • Samsung Audio
    • Google/Android AOA Audio
    • Bluetooth Audio w/ SBC & AAC Decode
    • Bluetooth Stack QDID Certified
    Additional software support included in v2.0 for:
    • Parametric and Graphical EQ functions
    • User configurable voice prompts
    • User configurable button press
    • Removed RTOS requirement
    Please note that there has been a major software change to the demo firmware shipped with original kits. The current software suite is revision v2.0. Please click here for more information on the software suites.

    *For Apple USB Authenticated applications contact applesupport@microchip.com

Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование
Описание:
The Low Voltage Motor Control Development Bundle provides a cost-effective method of evaluating and developing dual/single motor control power stage targeted to drive two Brushless DC (BLDC) motors or Permanent Magnet Synchronous Motors (PMSM) concurrently. The bundle comes with adsPIC DSC Signal board, Motor Control 10-24V Driver Board and dsPIC33EP512GM710 Dual Motor Control PIM.

The dsPIC (DSC) Signal Board supports both 3.3V and 5V operated devices for various applications andfrequently used human interface features along with the communication ports. The Signal Board has two major connectors, a 120-pin connector and a 60-pin connector to enable connection to the plug-in boards.

The Motor Control 10V–24V Driver Board (Dual/Single) along with the compatible dsPIC DSC Signal Board provides a software development platform to build and evaluate embedded motor control application software using Microchip’s high performance motor control Digital Signal Controllers (DSCs) and Microcontrollers (MCUs).
Возможности:

    dsPIC DSC Signal Board :

    120-pin power board interface connector for power application board
    60-pin expansion connector for adds-on boards
    Two 30-pin connectors for signal monitoring or expansion
    100/105 PIM header that support MCUs and dsPIC DSCs PIM with internal or external Opamp configurations
    Human Interfaces include reset and power buttons along with LED indicators for debugging purposes
    24V power input connector

    10-24V Power Board:

    Two PMSM/BLDC motor control power stages with electrical specifications:
    - Input DC Voltage: 10V–24V DC ±10%
    - Output Phase RMS Current: 10A nominal @ 25°C per phase
    MCP8024 gate drivers with under voltage, over voltage, over current, shoot through and short circuit protection
    Hall sensors or quadrature encoder interface in each motor control stages to enable sensor-based motor control algorithms
    Phase voltage and reconstructed neutral feedback signals in each motor control stages to enable sensorless BLDC operation
    DC bus current sense resistor for over current protection, torque control of BLDC motor and single shunt vector control of PMSMs.
    Phase current sensing resistors for vector control
    DC bus voltage sensing
    Dynamic brake chopper circuit with hardware and software brake control for both the inverter stages
    Over current protection and LED indication for PWM signals and power on status



Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование
Описание:
Microchip’s Grid-Connected Solar Microinverter Reference Design demonstrates the flexibility and power of SMPS dsPIC® Digital Signal Controllers in Grid-Connected Solar Microinverter systems. This reference design has a maximum output power of 215 Watts and ensures maximum power point tracking for PV panel voltages between 20V to 45V DC. High efficiency was achieved by implementing a novel interleaved active-clamp flyback topology with Zero Voltage Switching (ZVS).

This reference design is implemented using a single dsPIC33F “GS” digital-power DSCs from Microchip that provides the full digital control of the power conversion as well as all system management functions. As shown in this reference design the dsPIC33F ‘GS’ devices enable designers to easily and cost effectively develop products using advanced switching techniques / topologies that lower switching losses and improve overall system efficiency. The Grid-Connected Solar Microinverter Reference Design is royalty free when used in accordance with the licensing agreement.

Do you want a demonstration?

Please contact local sales office in your geography to request a demonstration.
Click here to find worldwide network of Sales & Support
Возможности:

    • High efficiency: 94.5% @ nominal conditions (230Vac systems)
    • Maximum power point tracking: 99.5%
    • Full digital control
    • Burst mode operation @ low output power
    • Output power de-rating @ low PV panel voltages
    • Protection against various current and voltage faults
    • System Islanding to detect grid failure

Документация:
  • Тестирование
Описание:
The PIC32MZ EF PIM is designed to demonstrate the capabilities of the PIC32MZEF family of devices using explorer 16 Development Board. It enables USB, Ethernet, and CAN development with PIC32MZ Series. A 200 MHz PIC32MZ2048EFH100 MCU with 2 MB Flash, 512 KB RAM, FPU, 48 ch. ADC, Hi-Speed USB, CAN 2.0b and 10/100 Ethernet is installed on the PIM.

FOR DEMONSTRATION SOFTWARE and Board Support Packages, PLEASE VISIT MPLAB HARMONY SOFTWARE FRAMEWORK
Возможности:

    • PIC32MZ2048EFH100
    • 200 MHz
    • 2MB Flash and 512 KB RAM
    • Floating Point Unit
    • Hi-speed USB
    • 10/100 Ethernet
    • 12-bit 18 MSPS 48 channel ADC
    • CAN 2.0

Документация:
  • Тестирование
Описание:
PIC32MM0064GPL036 General Purpose PIM is designed to plug into the Explorer 16 Development Board and demonstrates the capabilities of the PIC32MM “GPL” family of low-power and low-cost devices.

This PIM can be used to evaluate the following MCUs:

PIC32MM0064GPL036
PIC32MM0064GPL028
PIC32MM0064GPL020
PIC32MM0032GPL036
PIC32MM0032GPL028
PIC32MM0032GPL020
PIC32MM0016GPL036
PIC32MM0016GPL028
PIC32MM0016GPL020
Возможности:

    Here are some of the key features of this Plug-in-module:

    • The PIM includes the 64K flash PIC32MM0064GPL036, 40-pin UQFN device
    • PIM is supported by Microchip’s development ecosystem including the MPLAB X IDE and the MPLAB XC32 Compilers
    • Due to the flexibility allowed by the PPS feature, the 40-pin device is capable of performing all of the base functions on the 100-pin Explorer 16 board

Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование
Описание:
With the common use of cards instead of cash, Credit Card Reader (MSR, mag stripe/swipe readers) are an essential part of any POS system. MSRs can read any card with magnetic stripes, including some driver's licenses, gift cards, and other IDs.

Magnetic Card Readers (also known as Magnetic Stripe Readers or MSRs) read data from a 3-track magnetic stripe via a peak detection circuit and process that data for downstream users. After extracting data from the magnetic stripe, it is converted to binary data and formatted for encryption. They feed the swiped information to applications management software and connect through USB, RS-232, or PS/2 connections.

Microchip Magnetic card reader solution reads ISO/IEC-7811 cards (also known as “Frequency/double Frequency” (F2F) encoding standard).The data format encodes 7-bit data on Track1, 5-bit data for Track 2 and 3. Please refer to the features section for an in depth description of the Magnetic card readers capabilities.

Microchip offers 2 solutions, one using the dsPIC33EP family and the other using the PIC24F family of PIC's

  • For card readers that need to optimize for lowest possible power, the PIC24 XLP solution offers the lowest current consumption with sleep currents (Ipd) as low as 20uA
  • For card readers the need to optimize for lowest cost, maximumperformanceand highest level of integration, the dsPIC33 solution provides integrated op amps to save board space and component cost
This demo is not for sale, but can be easily created from components listed in the user's guide.

Возможности:

    Below are the key features of this swipe demo:

    Swipe Feature:

    • Single chip solution for reading all the 3 tracks(Note: some cards may have only Track1 and Track2 and in those cases, an error message “Track Not present” will be shown for Track3)
    • The software solution is tuned to read the swipe speeds anywhere between 60ms - 2 seconds
    • Reads both forward and reverse swipe directions
    Low Power Feature:

    • In order to reduce the power consumption, the device is put into sleep mode after every swipe
    • Even after the device is put to sleep, the swipe speed read range of 60ms - 2 seconds still holds good
    • The device wakes up during swipes by using the on-chip comparator as the wake-up source
    Software solution:

    • Exponential average mechanism is used to design the software filter
    • Interrupt based decoding of tracks
    • Integrated with MCHP AES-128 library where the user can key-in AES key on every power-up
    • The decoded data is presented either on the pin or can be dumped on a serial terminal
    • Calculates and displays the card swipe time
    Hardware Features:

    • No shielded cables are required
    • USB powered
    • On-board MCP2200
    • USB cable for the demo
    On-chip Peripherals used for the demo:

    • ADC
    • Three op-amps (one for each track)
    • Comparator to wake up from sleep
    • Timers (Four 16-bit timers)

Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование
Описание:
Microchip’s PICkit™ 3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer. In-circuit debugging offers these benefits:
  • Low cost
  • Minimum of additional hardware needed for debug
  • Expensive sockets or adapters are not required
The PICkit 3 can now also reprogram any PIC microcontroller with a simple push of a button: Find out more about Programmer-To-Go function*
*Please consult the PICkit 3 readme to determine Programmer To Go device support limitations.

Note: The PICkit 3 In-Circuit Debugger/Programmer is NOT a production programmer. It should be used for development purposes only.

The MPLAB PICkit 3 allows debugging and programming of PIC® and dsPIC® Flash microcontrollers at a most affordable price point using the powerful graphical user interface of the MPLAB X Integrated Development Environment (IDE). The MPLAB PICkit 3 is connected to the design engineer's PC using a full speed USB interface and can be connected to the target via an Microchip debug (RJ-11) connector (compatible with MPLAB ICD 2, MPLAB ICD 3 and MPLAB REAL ICE). The connector uses two device I/O pins and the reset line to implement in-circuit debugging and In-Circuit Serial Programming™.

If you need older software for programming with your PICkit 3, please visit our archives.

Header Information

Some 8-, 14- and 18-pin devices use small header boards with a special MCU for debugging. This special MCU has extra pins for PICkit 3 communication and therefore allows the use of all pins on the part for the application. The header board is not used or needed for programming. However, when debugging these devices the header must be used. See the "Header Specification" document below.
Возможности:

    • USB (Full speed 12 Mbits/s interface to host PC)
    • Real-time execution
    • MPLAB IDE compatible (free copy included)
    • Built-in over-voltage/short circuit monitor
    • Firmware upgradeable from PC/web download
    • Totally enclosed
    • Supports low voltage to 2.0 volts (2.0v to 6.0v range)
    • Diagnostic LEDs (power, busy, error)
    • Read/write program and data memory of microcontroller
    • Erase of program memory space with verification
    • Freeze-peripherals at breakpoint
    • Program up to 512K byte flash with the Programmer-to-Go*
    • Header Information

    *Please consult the PICkit 3 readme to determine Programmer To Go device support limitations.

    Some 8-, 14- and 18-pin devices use small header boards with a special MCU for debugging. This special MCU has extra pins for PICkit 3 communication and therefore allows the use of all pins on the part for the application. The header board is not used or needed for programming. However, when debugging these devices the header must be used. See the "Header Specification" document below.

Документация:
  • Даташит
  • Тестирование
Описание:
Bluetooth® has emerged as a standard of choice for connecting local embedded applications through a smartphone or tablet. Many applications only need simple command and control, or a quick status update from a sensor. By catering to these needs, Bluetooth Low Energy (BLE) has evolved to support these low-duty cycle applications with lower power consumption. Microchip’s eXtreme Low Power PIC® Microcontrollers and RN4020 Bluetooth low energy module help in achieving low power consumption.The PIC24FJ128GB204 or PIC24FJ256GB410devices used in this demo have an integrated hardware Crypto engine.This demonstration shows the simple communication between the RN4020 module and a Bluetooth Low Energy (BLE) supporting smartphone or tablet. The RN4020 module is controlled by the PIC24FJ128GB204 or PIC24FJ256GB410 MCU which include a hardware crypto engine used for AES encryption in the demonstration. The demo is built using standard development tools from Microchip including the Explorer 16 Board, PIC24FJ128GB204or PIC24FJ256GB410Processor Plug-In Module (PIM), and Bluetooth LE PICtail Plus Daughter Card. These readily available tools can be used to easily replicate this demo on your own. The demo is supported by MCU firmware and an app that will run on an Android phone or tablet. The first application is turning the LEDs on and off using the touch buttons on the tablet. The app can also show the state of the switches on the board, toggling on and off. The demo also includes data security using the crypto engine integrated on the PIC24FJ128GB204 or PIC24FJ256GB410 MCU, with up to128-bit AES. This demo shows a PIC24 XLP MCU working with Bluetooth LE talking to an Android tablet to show basic command and control similar to what would be used for a simple IoT sensor node. This demo can also be built using thePIC24FJ256GB410 Processor Plug-In Module in place of the PIC24FJ128GB204 Processor Plug-in Module.
Возможности:

    • PIC24FJ128GB204 or PIC24FJ256GB410 XLP MCU Plug-In Module
    • Explorer 16 Development Board
    • RN4020 Bluetooth LE Module on PICtail Daughter Card
    • Android Tablet with App
    • Integrated Hardware Encryption / Decryption
    • Bi-directional Communication
      • Basic Command & Control
      • LEDs, Switches, Temp sensor

Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование
Описание:
This flyback without optocoupler generates 12V @ 0.6A and 6.2V @ 1A from an input voltage range of 18 to 28V.
Документация:
  • Схемотехника
  • BOM
  • Тестирование
Описание:
This reference design provides an easy method to evaluate the power, and features of SMPS dsPIC® Digital Signal Controllers in high density quarter brick DC-DC converters for intermediate bus architectures(IBA). This reference design is implemented using a single dsPIC33F “GS” digital-power DSCs from Microchip that provides the full digital control of the power conversion and system management functions. As shown in this reference design the dsPIC33F ‘GS’ devices enable designers to easily and cost effectively create products using advanced switching techniques such as Phase Shift Full Bridge (PSFB) topology that lower switching losses and enable efficiencies as high as 94%. The reference design also supports the Full Bridge topology through minor hardware modifications. The Quarter brick DC to DC Converter Reference Design is royalty free when used in accordance with the licensing agreement.

This reference design works with telecom input range 36V – 76V DC and provides 12V with 200W power. Designed with planar magnetics, this reference design implements various non-linear techniques, which improves the performance and efficiency.

Do you want a demonstration?

This reference designs hardware is not currently available for purchase. You can request a demonstration. Please contact local sales office in your geography to request a demonstration.
Click here to find worldwide network of Sales & Support
Возможности:

    • Primary and Secondary MOSFET control
    • Active Current Share
    • Remote ON/OFF
    • Programmable soft start
    • Controlled Fall time
    • Voltage, Current, Temperature monitoring & Protection
    • Configurable output voltage
    • Full Digital Control
    • Supports both Full Bridge and Phase Shifted Full Bridge topologies

Документация:
  • Даташит
  • Тестирование
Описание:
The chipKIT™ Starter Pak contains everything you need to develop applications with the Arduino-compatible chipKIT platform. The Uno32 (TDGL002) includes an 80 MHz PIC32 processor with 128K Flash and 16K RAM. The Basic I/O shield (TDGL005) adds a variety of useful I/O devices such as buttons, switches, OLED graphic display, temp sensor, EEPROM, transistor outputs and more. A prototype shield kit from NKC Electronics is included, along with an innovative key that can be used to separate shields easily.

chipKIT boards work with a Multi-Platform IDE (MPIDE) and software framework that is compatible with most Arduino-based applications.
Возможности:

    • Pin-out compatibility with many existing Arduino™ shields that can operate at 3.3V
    • Lower price -point at four times the performance than existing solutions

Документация:
  • Тестирование
Описание:
The chipKIT™ uC32™ is based on the popular Arduino® open-source hardware prototyping platform and adds the performance of the Microchip PIC32 microcontroller. The uC32 is the same form factor as the Arduino Uno board and is compatible with Arduino shields. It features a USB serial port interface for connection to the IDE and can be powered via USB or an external power supply.

The uC32 board takes advantage of the powerful PIC32MX340F512 microcontroller. This microcontroller features a 32-bit MIPS processor core running at 80 MHz, 512K of Flash program memory and 32K of SRAM data memory.

The uC32 can be programmed using the Multi-Platform Integrated Development Environment (MPIDE), an environment based on the original Arduino IDE modified to support PIC32. It contains everything needed to start developing embedded applications. In addition, the uC32 is fully compatible with the advanced Microchip MPLAB® IDE and the PICKit3™ in-system programmer/debugger.

The uC32 is easy to use and suitable for both beginners and advanced users experimenting with electronics and embedded control systems.

The uC32 provides 42 I/O pins that support a number of peripheral functions, such as UART, SPI, and I2C™ ports and pulse width modulated outputs. Twelve of the I/O pins can be used as analog inputs or as digital inputs and outputs.
Возможности:

    • Microchip PIC32MX340F512H microcontroller (80 MHz 32-bit MIPS, 512K Flash, 32K SRAM)
    • Arduino Uno form factor; compatible with many shields that can operate at 3.3V
    • Multi-platform IDE and software framework are compatible with many existing Arduino code samples and other resources
    • 42 available I/O pins; two user LEDs
    • Requires a USB A to mini B cable (not included)
    • 7V to 15V input voltage (recommended); 20V maximum

Документация:
  • Схемотехника
  • Тестирование
Описание:
The chipKIT™ Wi-Fire board enables rapid prototyping with Microchip’s latest PIC32MZ architecture and Imagination Technologies' Flow Cloud Internet connectivity development software.

Digilent is a trusted 3rd Party Tool provider.

MPLAB Harmony Support available:
  • One Board Support Package (BSP)
  • Two USB demonstrations.

Возможности:

    • Microchip PIC32MZ Processor: PIC32MZ2048EFG100
    • Much faster than its WF32™ counterpart with 200 MHz operation speed, 2 MB of Flash, and 50 MHz SPI
    • Microchip MRF24WG0MA Wi-Fi® module
    • USB 2.0 Full-Speed / Hi-Speed OTG controller with A and micro-AB connectors
    • Micro SD card connector
    • High efficiency 3.3V switching power supply for low-power operation
    • Supported by Imagination Technologies' Flow Cloud Software for your IoT projects
    • Fully supported by MPIDE

Документация:
  • Тестирование
Описание:

Это решение представляет из себя 20 А солнечный контроллер заряда с отслеживанием точки максимальной мощности (MPPT), созданный для солнечных батарей с входом 12 и 24 В. Конструкция предназначена для небольших зарядок средней мощности  и поддерживает работу с 12/24 В панелями и 12/24 В батареями с выходом до 20 А. Разработанная с учетом требования масштабируемости, разработка может быть легко адаптирована для систем 48 В заменой MOSFET’ов на номинальное напряжение 100 В. Пользователь также может увеличить ток до 40 А, используя те же MOSFET, но в TO-220 версии корпуса.

Солнечный MMPT контроллер заряда был создан с учетом требований реального мира, включает обратную защиту батарей и программное обеспечение, сигнализирующее и указывающее на сбой работы аппаратной части.

Конструкция работает с эффективностью 97% при полной нагрузке в 24-вольтных системах. Для 12-вольтных систем эффективность около 96%, включая потери на MOSFET обратной защиты батарей.

 

Возможности:

  • Эффективность более 96% при полной нагрузке в 12 В и 24 В системах;
  • Поддержка широкого диапазона входного напряжения: 15-44 В;
  • Гибкий дизайн, поддержка 12 В и 24 В солнечных панелей;
  • Выходной ток: 20 А;
  • Небольшой размер платы: 130 х 84 х 22 мм.

Возможность заказа
  • Заказать BOM
Документация:
  • Даташит
  • Схемотехника
  • BOM
  • Тестирование
Описание:
This verified design can accurately measure current across a range of 30 A on a bus that carries up to 36-V common mode voltage over a range of -40°C to +85°C. This design can measure current from 0 A to 30 A with a grounded reference or -30 A to 0 A with a 16-V reference. The design sums the output of two INA250A2 devices and generates a ground-referenced output voltage. The INA250 is a voltage-output, current-sensing amplifier family that integrates an internal shunt resistor to enable high-accuracy current measurements.

Возможности:

• Compact layout with good thermal properties • 30A Sustained current measurement with parallel integrated shunt current sense amplifiers • Able to configure for full-range positive, full-range negative, or partial-range bidirectional current measurement • This circuit design is tested and includes documentation, data, and layout files. • Compact layout with good thermal properties • 30A Sustained current measurement with parallel integrated shunt current sense amplifiers • Able to configure for full-range positive, full-range negative, or partial-range bidirectional current measurement • This circuit design is tested and includes documentation, data, and layout files.

Возможность заказа
  • Заказать PCB
Документация:
  • Схемотехника
  • BOM
Описание:

Данное решение - двунаправленный неизолированный повышающий/ понижающий преобразователь, идеальный для применения в солнечных преобразователях, в гибридных автомобилях (в том числе с регенерацией или рекуперацией) и для зарядки аккумуляторов.

Возможности:

  • Высокая эффективность, КПД более 95%
  • Частота преобразования 250 кГц, что позволяет применять менее габаритные компоненты и уменьшить габариты печатной платы
  • Для разных приложений реализовано три режима контроля:
    1. контроль выходного напряжения
    2. контроль MPPT (контроль входного тока)
    3. контроль обратного напряжения
  • Решение включает в себя программное обеспечение Software Frequency Response Analyzer (SFRA) для измерения частоты и стабильности работы преобразователя
  • Контроль и управление реализованы на микроконтроллере C2000™ Piccolo™ TMS320F28035
  • Данное решение включает в себя руководство пользователя, ПО для управления, ПО Software Frequency Response Analyzer (SFRA) с графическим интерфейсом, схемы, файлы печатной платы и перечень компонентов

Примечание: программное обеспечение для этой платы входит в состав controlSUITE™ для микроконтроллеров C2000. СкачатьcontrolSUITE можноздесь: http://www.ti.com/tool/controlsuite. После установки перейдите в пункт "Bi-Directional Non-Isolated Buck Boost Converter" в Development Tools -> Digital Power.

Возможность заказа
  • Заказать BOM
  • Заказать PCB
Документация:
  • Схемотехника
  • BOM
  • Топология платы
  • Тестирование
Описание:

Данное типовое решение – DC/DC преобразователь с цифровым контролем и отслеживанием точки максимальной мощности для применения в инверторах для солнечных батарей. Он дополняет однофазный DC/AC инвертор TIDM-SOLAR-ONEPHINV от TI. Вместе эти два решения (TIDM-SOLAR-DCDCи TIDM-SOLAR-ONEPHINV) позволяют реализовать полноценный инвертор для солнечных батарей. Данный DC/DC преобразователь для солнечных батарей состоит из двухфазного повышающего преобразователя для отслеживания точки максимальной мощности и изолированного резонансного LLC преобразователя. На микроконтроллере C2000™ Piccolo™ TMS320F28035 реализованы управление DC/DC преобразованием и алгоритм отслеживания точки максимальной мощности. Эффективность данного типового решения составляет более 94% при полной нагрузке, что позволяет эффективнее использовать энергию от солнечных батарей и снизить тепловыделение на преобразователе. 

Возможности:

  • Реализует DC/DC преобразователь энергии с солнечных батарей с отслеживанием точки максимальной мощности. DC/DC преобразователь состоит из двухфазного повышающего конвертера для отслеживания точки максимальной мощности и изолированного резонансного LLC преобразователя.
  • Микроконтроллер C2000™ Piccolo™ TMS320F28035 управляет DC/DC преобразователем и алгоритмом отслеживания точки максимальной мощности.
  • Поддерживает входное напряжение с панелей от 200 В до 300 В и до 500 Вт на выходе при постоянном напряжении 400 В.
  • Эффективность более 94% при полной нагрузке позволяет эффективнее использовать энергию от солнечных батарей и снизить тепловыделение на преобразователе.
  • Программные библиотеки для солнечных систем и систем цифрового питания содержат оптимизированный блочный код, позволяющий реализовать разнообразную топологию питания и алгоритмы, такие как отслеживание точки максимальной мощности и фазовую автоподстройку, что идеально подходит для реализации нестандартных решений в области инверторов солнечной энергии.
  • Полнофункциональный отладочный набор включает в себя программное обеспечение, схему и файлы печатной платы, пошаговое руководство для быстрого старта.

Примечание: Программное обеспечение к этому отладочному набору входит в состав пакета controlSUITE™. Скачать его можно по ссылке ti.com/controlsuite. После установки перейдите к пункту "High-voltage Solar Maximum Power Point Tracking Development Kit" в разделе Development Tools-> Solarsection.

Документация:
  • Схемотехника
  • BOM
Описание:
The environmental changes of today are no exception. Professional weather stations are rightfully used, but cannot be placed in every corner of the world. What if it was possible to make a low cost weather station, which almost everyone could afford? What if we together could help out with a piece of the puzzle, trying to solve problems ahead?

We have created a portable weather station that will measure and display weather parameters such as
• Temperature
• Humidity
• Environment Air Quality
• Light Brightness
and can be used in office environment and outdoor as well. The design uses Microchip eXtreme Low Power MCU PIC24FJ128GC010 which drives the measurement for all of the sensors. The sensor values undergo signal conditioning using microcontrollers integrated Op-Amps and analog to digital converters making the sensor reading suitable for digital processing. To allow user to control the board and select different operating modes capacitive buttons are implemented using CTMU peripheral. A segmented LCD display and USB are both output for the board. The board is powered bytwo AA batteriesand also a coin cell connected to Vbat pin of the microcontroller for maintaining real time clock information even if the main battery is removed.

Besides displaying weather data on board, we can do meaningful use of data by sending data to cloud using computers. This demo also includes connectivity to computers using USB communications device class (or USB CDC), providing an interface for transmitting and receiving to other USB based systems. The demo is supported by Schematic, User guide and MCU firmware.

This level of integration is available on Microchip’s PIC24F ‘GC’ family, we call it intelligent analog and it improves system throughput, reduces noise, and reduces system cost by integrating several analog blocks. We also integrated user interface peripherals like USB, LCD to create a product that is perfect for portable medical and industrial sensors applications.


Возможности:

Документация:
  • Даташит
  • Програмное обеспечение
  • Тестирование