Top PSOP44 ZIF 600mil (Elnec )

Top PSOP44 ZIF 600mil, Elnec
Наименование Top PSOP44 ZIF 600mil
Производитель Elnec (ELNEC)
Артикул 2012692
Тип корпуса
Тип инструмента

Top PSOP44 ZIF 600mil - top board of PSOP44 adapters (mainly FLASH EPROM with 44-pins); operation (mechanical) life of ZIF socket - 10.000 actuations (70-1232).

  • Ord. no. 70-1232
  • Socket ZIF PSOP44, OpenTop type
  • Bottom 2x24 pins, square, 0.6x0.6mm
  • Class Specialized
  • Subclass Memory (NOR/NAND/eMMC)
  • Availability in stock 7 pcs. [other 55 pcs.  within 3 days]

Top PSOP44 ZIF 600mil

Adapter manual

  1. For work with PSOP44 device it is necessary put together Top PSOP44 ZIF 600mil with some Bottom PSOP44-x board according to the information provided by PG4UW software.
  2. The picture show, how to put together the Top PSOP44 ZIF 600mil and Bottom PSOP44-x boards to have complete PSOP44 adapter.
  3. Insert comlete adapter to the device programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this adapter in device programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the device programmer.
  4. Push the top of adapter ZIF socket to open it. Insert the device into the adapter ZIF socket. The right position of the programmed device in adapter ZIF socket is show at picture near (mainly left above) the adapter ZIF socket. Then release adapter ZIF socket.
  5. Visually check interconnection between device and adapter ZIF socket. If everything looks OK, the device is ready for programming.
  6. Be careful, because the incorrect insertion of adapter to the device programmer ZIF socket or device to the adapter ZIF socket can damage the programmed device.
  7. To take out the device push the top of adapter ZIF socket and remove device from it.
  8. When you finish work with adapter, remove it from the device programmer ZIF socket.
  9. Do not directly touch the pins of the adapter and adapter ZIF socket, because dirt may cause errors during programming of device.
  10. For handling with the device we recommended to use a vacuum pick up tool.
  11. Operation conditions: operating temperature 5°C ÷ 40°C (41°F ÷ 104°F), operating humidity 20%..80%, non condensing.

29 июня 2017 года компания ELNEC анонсировала новую версию управляющего программного обеспечения PG4UW для линейки своих программаторов.

12 октября 2017 года компания ELNEC анонсировала новую версию управляющего ПО PG4UW для линейки своих программаторов.

6590,00 от 2 шт. 6050,00
Расчет доставки...